JVC AVO48WP30 User manual

Formodels:
AVo56WF30
AVo48WP30
!!!!!!!
(located at the rear of the television cabinet): StaPl eyour sales receipt or invoice
to the inside cover of this guidel Keep this users guide in a convenient place for
_UtU[e referencel Keep the carton and origina! packaging for future use:
Serial Number Model Number
LCT1237o001B=A
0502=TN=FAA=JIM

m NT FETY
CAUTION:To reduce the risk of efectric shock.
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING:
CAUTION:
TO PREVENT FiRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS TV SET TO RAIN OR MOISTURE.
TO iNSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF
THIS UNIT.
1) Operate only from the power source specified on the unit.
2) Avoid damaging the AC plug and power cord.
3) Avoid Improper installation and never position the unit where good
ventilation is unattainable.
4) Do not allow objects or liquid into the cabinet openings.
5) In the event of trouble, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
* When you don't use this TV set for a long period of time, be sure to
disconnect both the power plug from the AC outlet and antenna for your
safety.
* To prevent electric shock do not use this polarized plug with an
extension cord, receptacle or other outlet unless the blades can be fully
inserted to prevent blade exposure.

iMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electricai energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personai safety. But improper use can reauJt in potential
electrical shock or fire hazards! in order not to defeat the safeguards incorporated in this TV
set, observe the following basic ruies for its instailation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
1) Your TV set is equipped with a polarized AC line plug (one blade of the plug is wider than
the other).
(POLARIZED:TYPE)
This safety feature allows the plug to fit into the power outtet only one way. Should you be
unable to insert the plug fuity into the outlet, try reversing the plug.
Should it still fail to fit, contact your electrician=
2) Operate the TV set only from a power source as indicated on the TV set or refer to the
operating instructions for this information, if you are not sure of the type of power supply to
your home, consult your TV set dealer or local power company. For battery operation, refer
to the operating instructions.
3) Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement=
4) Do not allow anything to rest on or toil over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5) Do not use this TV set near water = for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near swimming pool, etc.
6) if an outside antenna is connected to the TV set, be sure the antenna system is grounded
so as to provide some protection against voltage surges and buiit=up static charges. Section
810 of the National Electrical Code provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead=in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection
requirements for the grounding electrode.
-- n
IMPORTANT RECYCUNG iNFORMATiON
This product utilizes both a Cathode Ray Tube (C RT} and other
components that contain lead° Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information, p_ease contact your local
authorities, or the Electronic industries Alliance: http:!iwww.eiae.org

7) An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fait into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
_-- DISCHARGEUNIT
(NEC SECTION81_Z_)
ELECFR_C
SEF_CICE GROUNDINGCONDUCTORS
_ NR SERVICEGROUNDING
ELECFRODE SYS-fEN
NEC NATIONALELEC[RIC CODE (_C A_FLCLE 2S0_ PaRr H)
8) TV sets are provided with ventilation openings in the cabinet to atiow heat generated during
operation to be released.
Therefore:
-- Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
-- Never place a TV set in a "buiitqn" enclosure unless proper ventilation is provided.
-- Never cover the openings with a cloth or other material.
-- Never place the TV set near or over a radiator or heat register.
9) To avoid personal injury:
-- Do not place a TV set on a sloping shelf unless properly secured.
-- Use only a cart or stand recommended by the TV set manufacturer.
-- Do not try to roll a cart with small casters across thresholds or deep pite carpets.
-- Wail or shelf mounting should follow the manufacturer's instructions, and should use a
mounting kit approved by the manufacturer.
lo)
11)
12)
Caution children about dropping or pushing objects into the TV set through cabinet
openings. Some internal parts carry hazardous voltages and contact can result in a fire or
electrical shock.
Unplug the TV set from the wail outlet before cleaning. Do not use liquid or an aeroso[
cleaner.
Never add accessories to a TV set that has not been designed for this purpose. Such
additions may result in a hazard.

13) ForaddedprotectionoftheTVsetduringalightningstormorwhentheTVsetistobeleft
unattendedforanextendedperiodoftime,unplugitfromthewaitoutletanddisconnect
theantenna.Thiswillpreventdamagetoproductduetolightningstormsorpowerline
surges.
14)ATVsetandcartcombinationshouldbemovedwithcare.Quickstops,excessiveforce,
andunevensurfacesmaycausetheTVsetandcartcombinationtooverturn.
15) Unplug this TV set from the wail outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normatiy by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper
adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance -- this indicates a need for
service.
16) Do not attempt to service this TV set yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
17) When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer's specified replacement parts can prevent fire, shock, or other hazards.
18) Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer's service literature.
19) When a TV set reaches the end of it's useful life, improper disposai couid resuit in a
picture tube implosion. Ask a qualified service technician to dispose the TV set.
2o) Note to CATV system installer.
This reminder is provided to call the CATV system instal[er's attention to Article 820=40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical

Unpacking YourTeievision, , , 8
Quick Setup ............... 9
CONNECTIONS ......... 12
Front Panel Diagram ........... 12
Rear Panel Diagram ........... 12
Connecting to Cable or an Antenna .... 13
Cable and VCR Connections ...... 14
Connecting to a DVD Player,
DTV Decoder and D-VHS ......... 15
Connecting to a Digital
TV Receiver w!HDCP ........... !6
Connecting to a DVD Player ........ !7
Connecting to JVC AV Compu Link Ill , , ,!8
Connecting Devices to the Front Panel , , 19
Connecting to an External Amplifier , , , 20
Connecting to the Surround Amplifier , , , 20
Remote Control ......... 21
Installing the batteries .......... 21
Remote Control Basics .......... 21
Remote Programming ..... 22
Setting CATV, VCR, and DVD Codes , , , 22
Cable Box or Satellite Setup ....... 22
VCR Setup ................ 23
DVD Setup ................ 24
Search Codes .............. 25
Onsereen Menus ........ 26
Onscreen Menu System ......... 26
Using the Onscreen Menus ........ 27
Plug In Menu ............... 28
Language ........... 28
Auto Tuner Setup ....... 29
Set Clock ........... 30
Auto ......... 30
Manual ....... 30
Finish .............. 30
Initial Setup ............... 31
Auto Tuner Setup ....... 31
Auto Demo .......... 31
Channel Summary ....... 32
Channel Summary= Lock , , , 32
Channel Guard Message .... 32
Oneereen Menus (Continued)
V=Ohip .................. 33
US Rating System ....... 33
Viewing Guidelines ...... 33
MPAA Ratings ......... 34
Set Ratings Guidelines ..... 85
To Set TV Ratings Levels , , , 85
To Set Movie Ratings Levels , 86
Unrated Programs ....... 36
VVarning Message ....... 36
Canadian V-Chip Ratings , , 37
Set Lock Code ......... 38
Initial Setup 2 .............. 39
Language ........... 39
Closed Caption ........ 89
Front Panel Lock ....... 40
Auto Shut Off .......... 41
Digital-In ........... 41
Picture Adjust .............. 42
Tint .............. 42
Color ............. 42
Picture ............. 43
Bright ............. 43
Detail ............. 43
Picture Adjust 2 ............. 44
Color Temperature ....... 44
Dig, Noise Clear ........ 44
Noise Muting ......... 44
Sound Adjust .............. 45
Bass ............. 45
Treble ............. 45
Balance ............ 45
MTS .............. 46
Sound Advice ......... 46
Clock/Timers .............. 47
Clock Timers ......... 47
Set Clock ........... 47
On/Off Timer ......... 47
Setting the On!Off Timer , , , 48
Initial Setup 3 .............. 49
Vertical Position ........ 49
Center Oh Input ........ 50
XDS ID ............ 50
Power Indicator ........ 50
Aspect .................. 51
Aspect ............. 51
Aspect Ratios ......... 51
Adjusting CRT Color Convergence .... 52
6

Ta
Button Functions ........ 53
SPLIT .................. 53
SWAP .................. 53
FREEZE ................. 53
SELECT ................. 58
ENTER ................. 58
INDEX .................. 54
POP ................. 54
MENU .................. 55
EXIT ................... 55
DISPLAY ................. 55
SLEEP TIMER .............. 55
BBE ................... 56
HYPER SURROUND .......... 56
MUTING ................. 56
VIDEO STATUS ............. 56
NATURAL CINEMA ........... 56
ASPECT ................. 56
NUMBER BUTTONS = 10 KEY PAD . . . 57
100+ BUTTON .............. 57
RETURN+ ................ 57
V_CHIP ................. 57
INPUT .................. 58
MENU (On TV's Front Panet) ...... 58
LIGHT .................. 58
VCR BUTTONS ............. 59
DVD BUTTONS ............. 59
TViCATV SWITCH ............ 59
VCR/DVD SWITCH ........... 59
Appendices ........... 60
Troubleshooting ............. 60
Appendix A ............... 62
Limited Warranty ............. 68
Authorized Service Centers ....... 65
Specifications .............. 66
of
7

n
Thank you for your purchase of JVC's model AV_56WP30 or AVo48WP30 Color Television.
Before you begin setting up your new television, please check to make sure you have all of the
following items, in addition to this guide, your television box should include:
1 Television 1 Remote Control 2 AA Batteries
ii 1 1
_vc
Once you have unpacked you[ ielevision, the next Step is to €onnept it to you[m
antenn_Jcab!e or satellite system and to connect the audio/video devices you want to use j
with your television. To make these connections you will use plugs like the ones illustrated I
below j
RF Connectors
Used to connect a
coaxial cable from an
external antenna or Cable
TV system.
A/V input Plug
Used to connect
audio/video devices like
VCRs, DVD players,
stereo amplifiers, game
consoles, etc.
S-Video Hug
Used to make video
connections with VCRs,
DVDs, Camcorders, etc
(optional).
AV Compu Link CaMe
Used to connect JVC
AV Compu Link
capable components for
an automated home
theater.
We recommend that before you start using your new television, you read your entire User's
Guide so you can learn about your new television's many great features. But if you're anxious
to start using your television right away, a quick setup guide follows on the next three pages.

Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away, This information includes basic instructions
on operating your remote control, making a simple cable!antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
if you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One -The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control.
insert two batteries (included) carefully noting the "+" and "-" markings, placing the "-" end in
the unit first. Slide the cover back into place.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of the
remote.
Power Button Key Feature Buttons
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available
channels. The right and left buttons will turn the volume up or down. These buttons are atso
marked with four arrows and are atso used with JVC's onscreen menu system. You will need
to use these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or cable.
Proceed to Step Two

Step Two o Making Basic Connections
Next you will need to connect your television to an antenna, VCR or cable system. The most
basic VCR and antenna!cable connection is shown below. For more detaiIed connections,
such as ones where a cable box is required, or connecting with a combination of a cable box
and VCR, home stereo system, etc., see pages 12 to 20.
Cable or Antenna
Output
_q
TV Rear Panel __j_
(RF Input) Cable/RF connector
1) Connect an RF Cable from the wail outlet into the RF Cable In on the back of the TV.
Connecting to a VCR
WALL VCR
CABLE or ANTENNA OUT
BACK of TV
1) Connect the Red Cable from VCR Audio Output into the Red TV Audio In.
2) Connect the White Cable from VCR Audio Output into the White TV Audio In.
3) Connect the Yeltow Cable from VCR Output into the YeItow TV Video In, OR Connect an
RF Cable from VCR RF Cable Out into the RF Cable In on the back of the TV.
NOTE:
• White, Yellow and Red are the most common colors for VCR Cables. Some models may
vary in color. Please consult the user's manual for your VCR Player for more information.
• See page 23 for instructions on programming your remote control to operate the basic
functions of your VCR Player.
1Proceed to Step Three