jWIN JC-CD260 User manual

Instruction Manual
CAR CD 12/45SEC / Mp3 120SEC ASP PLAYER
RECEIVER (AM/FM)
DETACHABLE FRONT PANEL
FUNCTION OF CONTROLS
-- 1 --
R
JC-CD260
DISPDISP RPTRPT RDMRDM SCANSCAN ALLALL DIRDIR SONGSONG
MUSICMUSIC
MUTEMUTE
LOUDLOUD MONOMONO AFAF PTYPTY EONEON
JAZZJAZZ
CLASSICCLASSIC
LUD
LUD
SCN 3RPT 4RDM 5D-DN 6D-UP MODE
BND MUT CLK
ST LOC LUD
LUD
1
A/PS 2INT
L
E
S
H
S
U
P
60 WATT/DIGITAL TUNING SYSTEM
M P 3 C D / C D / C D - R / C D - R W P L A Y E R
6
7
8
9
10 12
1
2
3
4
13
11
15
18
DISPDISP RPTRPT RDMRDM SCANSCAN ALLALL DIRDIR SONGSONG
MUSICMUSIC
MUTEMUTE
LOUDLOUD MONOMONO AFAF PTYPTY EONEON
JAZZJAZZ
CLASSICCLASSIC
LUD
LUD
SCN 3RPT 4RDM 5D-DN 6D-UP MODE
BND MUT CLK
ST LOC LUD
LUD
1
A/PS 2INT
L
E
S
H
S
U
P
60 WATT/DIGITAL TUNING SYSTEM
Mp3 CD/C D / C D - R / C D - R W P L A Y E R
514 16
17 19
20 21 23
FUNCTIONS
CONTROL
1.POWER ON/OFF
Press any key to power up the unit.
Press this key for more than 1 second to turn off unit.
2,3. SEL (control mode select)/MENU KEY
Push to select the desired mode,VOL(volume),BAS(bass),TRE(treble)
BAL(balance),or FAD(fader).
This button normally functions as the volume control.Adjust the level
rotate(3) after selecting the desired control mode.Otherwise the mode
will go back to the volume control mode.
Control Mode
Volume control
Bass control
Treble control
Balance control
Fader control
For less volume
For less bass
For less treble
Todecrease the right speaker volume
Todecrease the front speaker volume
For more volume
For more bass
For more treble
Toincrease the left speaker volume
Toincrease the rear speaker volume
MENU KEY
Hold the SEL key to choose the menu.
22
Turn clockwise: Turn counter clockwise:
1) menu1:
Rotate the SEL knob
Press and hold longer than one second to activate the DSP feature. to select
DSP mode sound effect as shown in sequence below.User setting value of bass/treble in normal
mode is always memorized.In rock/classic/pops mode,bass/treble mode is skipped and level is
not changeable
FLAT----CLASSICS----POP M----ROCK M----DSP OFF.
Bass and Treble gain of each mode is as shown in below table.
Initial value of bass/treble in NORMAL mode is 0 dB.

-- 3 --
-- 2 --
14.MUTE BUTTON
Press the MUTE button to stop and the LCD will flash "MUTE".
To stop this function press again the same button.
15. SCAN BUTTON
Press this button briefly (LESS THAN 2 SEC.)and the radio will tune to the next
memory preset station, pausing for 6 seconds, and repeating the process endlessly until
a selection is mode.
To stop scanning, press this button once again, or press the preset buttonbriefly
that corresponds to the channel number blinking on display.
16.PANEL RELEASE BUTTON
Press the button and the right-side section of the panel will release.
2) menu2:BEEP ON--BEEP OFF
The situation of beep sound is selected.The 2 mode is selected as also vol up
or vol dn key.
BEEP ON mode: A beep sound is generated when each key is pressed.
BEEP OFF mode: The beep sound is disabled.
3) menu3:VOL LAST--VOL Addition
4) menu4:SEEK1--SEEK2
SEEK1:SEEK is activated right away when key is pressed for longer than 500ms.
SEEK2:SEEK is activated after key is released.
5) menu5:ESP12--45 OPTION
THE ANTI-SKIP PROTECTION FUNCTION (ASP)
Whilef in use,the player is likely to receive shocks or vibrations.The ANTI-SHOCK FUNCTION
is active to provide uninterrupted playback.
Should the player receive shocks for more than 45 seconds continuously in cd playback or
120 seconds in mp3 playback,the sound will mute for a very short while and will resume on-
ce the player has stabilised from the shock.
ESP12:Selected ESP time 12 seconds.
ESP45:Selected ESP time 45 seconds.
6) ENTER:User can select track/files and do character search while in Mp3 MODE.
VOLUME LEVEL is determined when POWER ON
LAST VOLUME:Final VOLUME LEVEL generates power before power off.
ADJUST VOLUME:VOLUME LEVEL selected by the user is produced.
4. LOUDNESS BUTTON
-Press this button to boost the bass and treble response.Push the button again to return to
normal operation.This function is useful when listening at low levels.loudspeakers are ineffici
ent at low power levels and will tend to sound flat.The loudness control will boost the bass
and treble response thus giving a more lively performance.
While this function is operating,the display shows LUD.
5. LCD DISPLAY
-The liquid crystal display will display the current status of the unit.
6. BAND SELECTOR SWITCH
Press this switch to select the desired Radio band.Selection is made in regular sequence as FM-AM.
7. AUTOMATIC OR MANUAL TUNING(FREQ UP>>OR FREQ DOWN<<)
(A) RADIO MODE
When pressed for less than 1 second,these keys operate as manual tuning mode.
When pressed longer than 1 sec.,they are operated as SEEK tuning mode.(AUTO)
(B) CD PLAYER MODE
When pressed for less than 1 second,these keys operate as TRACK UP or TRACK DOWN.
When pressed longer than 1 sec.,they will operate as CUE or REVIEW mode.
8. LOCAL/DISTANT BUTTON
Press local/distant(LO/DX) button for listening to weak stations.LOC indicator will appear on the display.
Press this button again (Distant mode) for normal operation.
9. DISPLAY BUTTON (Set the Clock)
Selects radio frequency or clock display.
To set the clock:
1.With clock display selected,hold down the (CLK) button until clock display starts flashing.
2.Press (-) to change minutes,(+) to change hours.
3.Press (CLK) button to start the clock.
10. PRESET STATIONS
Six numbered preset button store and recall stations for each band.
Storing station
1.Select a band (if needed)
2.Select a station
3.Hold a preset button longer than one second.Preset station number appears in the display when
station is saved.
Recall a station:
1.Select band (if needed)
2.Press a preset button for less than one second to select stored station.
11. AUTOMATICALLY STORE STATIONS
Select six stations and store them in current band.
1.Select a band (if needed)
2.Hold A/PS button for more than three seconds.The new station replace stations already stored
in that band.
Preset A/PS
1.Select a band (if needed)
2.TouchA/PS for more than one second but less than three seconds.Radio pauses for five seconds
at each station.TouchA/PS again to stop scanning when the desired station is reached.
12.STEREO/MONO SELECTOR
This function will only affect FM reception.Press this button if the FM reception becomes noisy/hissy.
If the station being received is in stereo,it will now be played in mono.Press this button again to return
tthe receiver to normal reception
13.MODE BUTTON (MODE)
By pressing this key,user can select RADIO mode,AUX mode,CD PLAYER mode.
FLAT M
ROCK M
CLASSIC M
POP M
LCD DISPLAY
ROCK
CLASSIC
POP
BASS (F=100HZ)
0 dB
MID (F=1KHZ) TREBLE (F=10KHZ)
0 dB
0 dB
6 dB 2 dB
0 dB
2 dB 2 dB
0 dB
-4 dB -2 dB
0 dB
DSP OFF X dB X dB
0 dB
NORMAL
FLAT
8. LOCAL/DISTANT BUTTON
Press local/distant(LO/DX) button for listening to weak stations.LOC indicator will appear on the display.
Press this button again (Distant mode) for normal operation.

-- 5 --
-- 4 --
23.RANDOM BUTTON (RDM)
Press the key. Track will be palyed in randomorder.
To cancel the function press the key again.
19.TRACK/SEARCH BUTTON
FORWARD AND REVERSE TRACK SEARCH
Press the SKIP button or during play to go to the desired track(song).
( ....REVERSE)(
....FORWARD )
Press and hold the SKIP button or during play to scan the disc at high speed.When the
desired music section of the disc is found,release the button.Normal play will resume.
20.PAUSE BUTTON
During PLAY press button to PAUSE.Press it again to resume play.
21.INT BUTTON (Priview all Tracks)
This feature allowes you to listen to the first 10 seconds of each track on the
display .Press the key SCAN indicator appears on the LCD pannel.
To cancel the function press the key again.
To repeat the current track press the key.The RPT indicator appears on the LCD
panel and the track be repeated continuously.
To cancel the function press the key again.
22.REPEAT BUTTON (RPT)
17.CD EJECT BUTTON
Press the EJECT button to remove the CD.The receiver will automatically switch to radio mode.
DISPDISP RPTRPT RDMRDM SCANSCAN ALLALL DIRDIR SONGSONG
MUSICMUSIC
MUTEMUTE
LOUDLOUD MONOMONO AFAF PTYPTY EONEON
JAZZJAZZ
CLASSICCLASSIC
LUD
LUD
SCN 3RPT 4RDM 5D-DN 6D-UP MODE
BND MUT CLK
ST LOC LUD
LUD
1
A/PS 2INT
L
E
S
H
S
U
P
60 WATT/DIGITAL TUNING SYSTEM
M P 3 C D / C D / C D - R / C D - R W P L A Y E R
18
17 19
20 21 23
22
CD CONTROL LOCATION OF PARTS
18.CD SLOT
AS/PS is the Digital Audio Mode selection key (Mp3)
When pressed,it selects the mode of Digital Audio.
Search track directly -----Search File or directory----- Search character name
1. Search tracks directly in digital audio Mp3.
TRACK SEARCH EXAMPLE
1.How to find track number 133,Title name ABC .mp3
a.Press SEARCH key to go to TRACK search mode.
The LCD,displays first digit, 001.
b.Press ENTER(SEL/MENU)to accept 1 digit 1,then LCD will show 010. 1 digit 1 is selected.
c.Then press SEARCH UP (VOL+) key 3 times,then 2 digit will increase according to the numb
er of times key is pressed.
D.If LCD shows 013 then ,press ENTER key again. Then 2 digit is selected.LCD will show 130.
e.Third digit 0 is displayed.Then press SEARCH UP key 3 times to enter 3 digit to 3.
f.Press ENTER key LCD shows 133,The track number is selected and ready to be played.
g.Finally press ENTER,then track number 133 will play immediately.
f.SEARCH UP/DOWN key perform to shift number grom 0-9 as a loop rotation.
FILE SEARCH EXAMPLE
If the structure of Disc above has Mp3 TOC,it is as follows.
Total Dir:4 Total song:7
Dir of Mp3 files:3 (A,C,D)
We regard Dir as Mp3 file. When operating it is located as A---C---D--A...
To listen to a song from Mp3 (ON Normal play)
1.Press search key (2 times) [file search mode displays.]
2.Press enter key [ -A- Dir display.] DISC A C
3.Press search down key (2 times) [-D- Dir displays.]
4.Press enter key (1 times) [ -e- file displays.]
5.Press search down key (1 times) [-f- file displays.]
6.Press enter key [ -F- Mp3 file plays start.]
.
BD
C.MP3
D.MP3
A.MP3
B.MP3
F.MP3
G.MP3
E.MP3
BD
Back.MP3
Fortune.MP3
Asia.MP3
Delight.MP3
Echo.MP3
Glass.MP3
China.MP3
A
DISC C
CHARACTER SEARCH EXAMPLE
If the structure of Disc above has MP Toc,it is as follows
Total Dir:4 Total song:7
Dir to have Mp3 files:3 (A,C,D)
To listen to a song from Mp3 (On normal play)
1.Press search key (3 times) [character search mode displays.]
2.Press enter key [ -character A displays in the 1 digit.]
3.Press search down key (4 times) [-character E displays.]
4.Press enter key (1 times) [-character EA displays.]
5.Press search down key (2 times) [-character EC displays.]
6.Press enter key [-character ECA displays.]
7.Press search down key (7 times) [-character ECH displays.]
8.Press enter key [-character ECHA displays.]
9:Press search down key (14 times) [-character ECHO displays.]
10:Hold enter key for longer than 0.5sec, ECHO file begin playing.
M5 DN M6 UP IS ASSIGNED AS 10 TRACK when normal play and searching file or directory.
1. Press the release button and pull-off the front panel.
2. To install the front panel, insert the panel into the housing and make sure the panel is securely
installed, otherwise, abnormalities occur on the display or some keys will not function properly.
HOW TO REMOVE AND INSTALL THE FRONT PANEL
PRECAUTIONS
PRECAUTIONS WHEN HANDLING THE FRONT PANEL
Do not touch the contacts on the front panel or on the unit body, since this may result
in poor electrical conductivity. If dirt or other foreign substances get on the contacts, wipe
them with a clean dry cloth.
Do not leave the front panel in any area exposed to high temperatures or direct sunlight.
Do not drop the front panel or otherwise subject it to strong impact.
Do not allow such volatile agents as benzene, thinner, or insecticides to come into contact with
the surface of the front panel.
Never try to disassemble the front panel.
ST
ND
RD
ST

Front Panel
Release Button
INSTALLING THE FRONT PANEL
REMOVING THE FRONT PANEL
-- 6 -- -- 7 --
1
7
4
25
3
1. Dashboard
2. Nut (5mm)
3. Spring washer
4. Screw (5 x 16mm)
5. Screw
6. Strap
Be sure to use the strap to secure the
back of the unit of the place. The strap
can be bent by hand to the desired
angle.
7. Plain washer
1. Frame
2. Insert fingers into the groove in the front
of frame and pull out to remove the
frame .(When re-attaching the frame.
Point the side with a groove downwards
and attach it.)
3. Lever
Insert the levers supplied with the unit
into the grooves at both sides of the unit
as shown in figure until they click.
Pulling the levers makes it possible to
remove the unit from the dashboard.
3
1
6
4 SPEAKER WIRING4 SPEAKER WIRING
CONNECTIONS
ANTENNA
FRONT
LEFT
SPEAKER
REAR
LEFT
SPEAKER
FRONT
RIGHT
SPEAKER
REAR
RIGHT
SPEAKER
+ WHITE
- WHITE/BLACK
+ GREEN/BLACK
- GREEN
VIOLET +
VIOLET/BLACK-
GRAY +
GRAY/BLACK-
RED(R)
WHITE(L)
RED(R)
WHITE(L) 7A
1A
0.5A
FUSE
YELLOW
BACK UP
RED
B (+)
BLUE
AUTO ANT(+)
BLACK
GROUND(-)
LINE OUT
LINE IN
GRAY
BLACK
Choose the mounting location where the unit will not interfere with normal driving function.
Before finally installing the unit, connect the wiring temporarily and make sure it is all connected
properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other modifications
of the vehicle.
Install the unit where it does not get in the driver s way and cannot injure the passenger if there
is a sudden stop. Like an emergency stop.
If installation angle exceeds 30 from horizontal,the unit might not give its optimum performance.
Avoid installating the unit where it would be subject to high temperature.such as from direct
sunlight. Lower case or from hot air, from the heater,or where it would be subect to dust, dirt or
excessive vibration.
INSTALLATION
NOTE:
DIN FRONT/REAR-MOUNT
This unit be can be properly installed either from Front (conventional DIN Front-mount) or Rear
(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For
detail, refer to the following illustrated installation methods.
DIN FRONT- MOUNT (Method A)
Installing the unit
1. Dashboard
2. Holder
After inserting the holder into the
dashboard, select the appropriate tab
according to the thickness of the
dashboard material and bend them
inwards to secure the holder in place.
3. Screw
1
3
2

USING THE RESET BUTTON
FLASHING
Press button with a thin, pointed object if unit is malfonctioning. Though not a normal
occurrence, the microprocessor which controls the operation of this unit can be affected
by electrostatic noise.
This generally is indicated by such symptoms as no power being supplied when you switch
the unit on, failure of buttons and controls, or an abnormal display.
Should this happen, press the reset button with a thin, pointed object to reset the microprocessor.
SPECIFICATIONS
FM SECTION
MW(AM) SECTION
Frequency Range : 87.5-107.9 MHz
Frequency Range : 530 - 1710 KHz
Channel Step : 200 Khz
Channel Step : 10 KHz
Intermediate Frequency : 10.7 MHz
Intermediate Frequency : 450 KHz
Usable Sensitivity : 33 dB
Image Rejection Ratio at 106KHz : >50 dB
Image Rejection Ratio : >50 dB
Signal to noise ratio : >60 dB
If Rejection Ratio : >50 dB
CD PLAYER SECTION
Signal to noise Radio : More than 60dB
Channel separation : More than 60dB
Frequency Response : 20Hz - 20KHz
GENERAL
Power Supply Voltage : DC 12 Volts Negative Ground
Speaker impedance : 4 - 8
Maximum Output Power : 15W x 4CH
Dimensions Chassis : 178(W) x 50 (H) x 160(D)mm
RESET
-- 8 --