Karakoram NOMAD Quick setup guide

NOMAD
NOMAD-W STRAIGHTLINE
PRIME-X
PRIME-X W
X CARBON
X CARBON-W
ALPINE PRIME BINDINGS
Assembly and Use Instructions
Patented US8469372B2, US8733783B2 and Patents Pending
Ride Mode 2.0 DualSpeed Risers
Tour Mode
M4 Hex
Interface Screws
Ride Mode 2.0
DualSpeed Risers
M4 Hex
Interface Screws
Disclaimer:
Snowboarding is an inherently dangerous and hazardous
sport and can result in serious injury or death. Karakoram
shall have no liability for injuries sustained by use or mis-use
of this product. The user takes full responsibility for learning
proper backcountry travel and avalanche safety.
6x
10x
8x
M6x10mm Buttonhead Screw
Tour Mode
M6x8mm Buttonhead Screw
4x for DualSpeed Risers
6x for Tour Mode with thin core boards
M6x14mm Flathead Screw
Ride Mode 2.0 (attached to card) M3 Hex
Binding Screws
PRIME SYSTEM PARTS INCLUDED:
For binding size adjustment and installation videos
please visit:
www.splitboardbindings.com/manuals-and-instructional-videos
SIZE CHART:
Men’s Small: 6-8 Women’s Small: 6-8
Men’s Medium: 8.5-11 Women’s Medium: 8-10
Men’s Large: 11.5-13
DualSpeed Risers
DualSpeed Risers
SPLITBOARD TRANSITION- TOURING
PUT BINDING IN TOUR MODE
2
ADJUST DUALSPEED RISER TO SLOPE
ANGLE AS DESIRED
4
ENJOY THE SCENIC WALK UP
3
OPEN
CLOSED
STRIDERIDE
SPLITBOARD TRANSITION- RIDING
JOIN SPLITBOARD
1
TURN DUAL RIDE-STRIDE TO A RIDE POSITION
2
DROP-ON BINDING TO RIDE MODE
3CLOSE LEVER 4
IT’S TIME TO RIDE!
5
OPEN
CLOSED
TURN DUAL RIDE-STRIDE 90° TO STRIDE POSITION
1
RIDE STRIDE
10°-22° 0° or 15°

RIDE MODE 2.0 INSTALLATION TOUR MODE INSTALLATION
Set stance angles
Align dashes with seam of splitboard
Match alignment arrows
Match dashes and tighten mounting screws
(4 Left Foot, 4 Right Foot)
1
2
34
1
2
3
4
Fit binding to Ride Mode 2.0. Binding should drop-on
smoothly. For more information visit:
www.splitboardbindings.com/manuals-and-instructional-videos
5Mount Tour Mode
5
6Mount DualSpeed Risers
6
Positioning:
Nomad and Xslide
toward tip of ski.
Connect slide toward
tail of ski.
M6x8mm
Buttonhead Screw