Kenwood KDC-X993 - eXcelon Radio / CD User manual

CD-RECEIVER
KDC-X993
KDC-HD942U
KDC-X693
KDC-MP642U
INSTRUCTION MANUAL
Kenwood Corporation
~
AAC
o Bluetooth@
Ii:iI Made for
@J iPod
_. Designed for
•'
.. Windows
.'" Media'"
€.P H» Radio® H» Radio®
READY READY
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below.
Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Serial number _
US Residence Only
©864-4416-00/01 (KW)

Basic Operation
Category and Channel Search
Preset
Memory
Preset Tuning
Channel
Scan
Direct Access Tuning
Basic Operations of remote control 43
Appendix 45
Accessories/Installation Procedure
50
Registering Bluetooth device
Registering Special Bluetooth device
Registering
PIN Code
Downloading the Phone Book
Selecting the Bluetooth device
You Wish to Connect
Deleting aRegistered Bluetooth device
Displaying the Firmware Version
Adding avoice dialing command
Setting aVoice Command for Category
SMS (Short Message Service)
Downloading the SMS
Satellite Radio tuner (Optional Accessory)
control
41
Contents
Before use
Basic Operation
Hands-free phoning
Function Control
Display Settings
DisplayType Selection
Text Display Selection
Illumination Color Selection
Auxiliary
Input Display Setting
Music disc/Audio file Operation
Music Search
Music Search for iPod
Searching for Music by Initial
All Random
iPod Control by Hand
Mode
Direct Music Search
Direct Disc Search
Basic Operation of Disc Changer (Optional)
Tuner Operation
Auto Memory Entry
Station Preset
Memory
Preset Tuning
Direct Access Tuning
PTY (Program Type)
Program Type Preset
Registration
of aStation as a PTY
HD Radio tuner control
Auto Memory Entry
Station Preset
Memory
PresetTuning
Direct Access Tuning
HD Radio Tagging (iTunes Tagging)
Operation of hands-free phoning
Before Use
Receiving acall
During acall
Call waiting
Other functions
Making acall
Dial a
number
Speed dialing (Preset dial)
Calling a
number in the Phone Book
Calling a
number in the call log
Make avoice dialing call
Registering
to the Preset Dial Number List
Display
of phone number type (category)
Bluetooth Audio Operation
Before Use
Basic Operation
Other Functions
Activating Security Code
Deactivating Security Code
Manual Clock
Adjustment
3
4
6
10
13
16
18
20
24
25
Date Adjustment
Date Format Selection
AMP Control
Demonstration
mode setting
Theft Deterrent Faceplate
Audio Adjustments
Audio Control
Audio Setup
Sound Setup
Cabin selection
Speaker setting
DTA (Digital Time Alignment) setting
X'Over setting
Preset Equalizer curve select
Manual Equalizer Control
Preset position selection
Manual position setting
Audio Preset
Memory
Audio Preset Recall
Favorite Control
Favorite Preset Memory
Favorite Preset Recall
Favorite Preset Memory Delete
Favorite Name Setting
Bluetooth Setup
Connecting Wires
to Terminals
Installation/Removing the Unit
Troubleshooting Guide
Specifications
28
29
34
36
51
52
54
57
2I KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Before use
AWARNING
To prevent injury or fire, take the following
precautions:
• To prevent ashort circuit, never put or leave allY
metallic objects (such
as coins or metal tools) inside
the unit.
Do not use this unit before canceling
Demonstration mode!
This unit is initially set on the Demonstration mode.
When using this
unit for the first time, cancel the
<Demonstration mode setting> (page
27).
How to reset your unit
oIfthis unit or the connected unit (disc auto changer,
etc.)
fails to operate properly, press the Reset button.
The
unit returns to factory settings when the Reset
button is pressed.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such
as asilicon cloth.
Ifthe faceplate
is stained badly, wipe the stain off with
acloth moistened
with neutral cleaner, then wipe it
again with aclean soft dry cloth.
~
•Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with ahard cloth or
using avolatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the FaceplateTerminals
Ifthe terminals on the unit or faceplate get dirty, wipe
them
with aclean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on
the lens may not allow CDs to play.
In such asituation, remove the disc and wait for the
condensation
to evaporate. Ifthe unit still does not
operate normally after awhile, consult your Kenwood
dealer.
•Ifyou experience problems during installation,
consult your Kenwood dealer.
•When you purchase optional accessories, check with
your Kenwood dealer
to make sure that they work
with your model and
in your area.
oCharacters that conform to ISO 8859-1 can be
displayed.
oThe RDS feature won't work where the service is not
supported by any broadcasting station.
•
In this document, the description indicator will light
means astatus
is displayed. Refer to <DisplayType
Selection> (page
10) for the details of the status
display.
•The illustrations
of the display and the panel
appearing
in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from
what appears on the
display on the actual equipment, and some
of the
illustrations on the display may be inapplicable.
Handling CDs
•Do not touch the recording surface of the CD.
•Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
oDo not use disc type accessories.
•Clean from the center
of the disc and move
outward.
•When removing
CDs from thiS unit, pull them out
horizontally.
oIfthe CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
•
CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
•This unit can only play the
CDs with rlliiml rillim rilliml
_.~- &oii!i! ~
This unit may not correctly play discs which do not'
have the mark.
o You cannot playa CD-R or CD-RW that has not been
finalized.
(For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)
English I3

.,
::- '.
Allows you to Set up the environment
Allows you to set up the display and color:
Allows you to set up the sound environment
Allows you.to set up the B1uetootn function.
Category Function of setup item
.. BT
; MENU
SETUP
SOUND,
'~ • ~, >~"~ ~,,~~"'. ~'("'c '
;Generallunctio':'s: ,.""AuxiiiiirYittPut,- ", '," '. "" .::
:~~~:r:;~:;;: S~I~et ~Jm;ri~_ (~RCI :: _ -, ;1;'~onne:~t~~,Aortable audio deVi~~ 0li~~ini-pjug" '
Ty;ns on thepower' : ' ; ~: ":::;;' , :;.~~ ,', ~: ~,;table- (3.50); -
Whenthepowe~'is,ON~S~I~~k;~~~~rce:::,':, .. ~-~-;,-:f~ ':~ Tv' '. ,:F '" '
< ,~ ~ ~ or " '" ~ v ' \- - ~ ~"'''- ~ : ~_ ;, :: ' • 1_' ~- ,'-. ' ' - - ~., - ~
,s~~ ~el~~t mode l:PIessJI;T~'r~n(] bUttonand then' ""i,:f ":,Use t~~ 'T:'i~i~plu9'cabl~ whi,ch is sterecL:type and does not
tt)r:r.tt:ieCohtr0IKnO~O,f:p~~h1t~tdJvaidUP'ordow~;,,:;, ;;>i'h~~e:~~rr:~istance:' '., ..... _ ':" •.. '.' ..... '
To determinethe selede~sowrce,:Qi~;~'the:Co'ntrQI~""- ' ,'''Jhe :~~Ihary in~l1t requ,ires the se~in~ft:nade in "MENU">
Knob;',:';::» ;,', ' <", ~~~;:9t <FLJl')etlol) ~ormol> (pa~~9)' ,
.'.',':~,.'_":',,~'.':_ ' .:,.'.:<1,,~"'~(~,: _,"-,_ ,':-::,,'," .. ', _ " .. ,. ,-:'-'_,,' ',~<H_,:r<':f'"
SRC Sel~cf rno9~'~:~~~!i~5{P9tl;lisj):UttQti~~Ch tih:i~' ···,T~~!~~(escroU:, Co~trolk~,I;t: .. : .. : .
s"Yitches between~s()(Jr(:es.:' ~;, <W,'1 ", : :, .. , , •... :;";$cro!ls>thE! CD !:lnd audipJiletextdis-pl;ay when
>;__ ,'"1 ._<>L_~' --' , .. ,,"~ <' ~ ,~<- -, -~. ~ rr..X _ - -_ _ __ __ • ,--). f
Tuner ("Ty:NER:or fH;D ~atfi~;n;:USBor iPod:("USB" or' " ~,;.pus,~i:ng1o~~rd up for ~t least 2. seccmds.
K~PodH), Cp .c'CDH~ I A~xillf!Y~Dt:U'~ (·ApX1,~~~dSt~~~~y~, :,;"'~tingyol~me up?nJeCeptlon'o¥Phone cC)1I
( STANDBY) , . ,', . ~ ',;' ;;, '¢' ~ d' ~:; ': ;,:Whenthere;is a cal], ·C,A.le is displayed:andthe audio
Press a~"lea~t l'S~cqfleLto:tum'Qff,the:pbwer. '~;'system is;paused,,' .
~, " • .': :'" .:,' , ,: • .' .. ,... iWhef):,theciall ends,·CAlL· disappe~rs and the ',auqi:o
• The SRCSelectmOp~}~i3P:be SEitiJi~MEN,ti~>"SRC Seleet,,'of " . syste~ t()mes, ba~k ~n·" . ' .. ' ". ..... '
<Func:tion ContrQI> (page 6), .' ,. ..., " Th~audio system comes back pnwben [SRCI is
• Auxilia~,inputs?urs~ i,~ lQi~ally,~et to ·OFF: Set "BLiilt Jri: , , ,presse~:f duringa calL
AUX" c!e~crib~d III tfum;tidrl, C?~~rp!> (pa~e 6) to ~q~.~ ,,' ,;;'@2. ' : ...
: Select "MENU" >- "Built iA AUX'" . ", ;' ... ;, .... .
• When an optiOnal'acces~OrY:'i~tbrineeted; the source na;~e 0> :~o use the TEL Mute featu~e,you need to hook up the MUTE
for eQc,h'devi(~ appears," . " .:,:,. .. '. ,WIre to y?~rtelephone LJSII"l~ a commercial telephone ' ..
• When connec.--.t. i.o ... i\of the iPod."js. recogn'zed thO .. ' . :. ,accessory, Refer to <~onnecting Wires to Terminals>, (pa,ge
_ .,.0_ • ,> , ..... ,' I,.' esourc; ,. , 51). ,
display cha,n9~~:from;JJSB~;to:"iRbd~ ,,' " " . "'.. ..
USB (iPod) souteEi is'recognlzedasCb source onthe'; ~. ' ;'FunctianControl~ [FNC)
connected unit ' . Pr~s~ing this button ,allows you t() set various, '.
Volumeco.ntrol:fA(JDlknob fUnctions using the Control knob, Refer to <Fl1nction
Turn theknol:Hoadjust th~'{olulTIe, ~Control> (page 6),
, ~' ' ;"
Subwooferoutput: <ontrotknob, . ,
SWitch~sbetweer;) ON rSUBWOOFEH ONN) and OFF
(HSUBWOOFER OFF"): each timepushing toward down'
for at
least 2 se~onds.· .
~:~, .
AI.lows you to set uP the eacb soutce function,
4I KDC-X993! KDc -HD942UlKDC ~X69J/ KDC -MP64:iU
" ;.' -' -- - ~
,'

Favorite Control: Control knob
You can recall the various registered functions by
turning the Control
knob.
For example, you can recal! and playback the p!aylist
in iPod while listening to Tuner.
Refer to <Favorite Control> (page 34).
Tuner lunctions
-------
FM band: Controlknob
Switches between FM1, FM2, and FM3 each time
pushing toward
up.
AM band: Controlknob
Switches to AM when pushing toward down.
Tuning: Control knob
Changes the frequency when pushing toward leftor
right.
~
~
• During reception of stereo stations the "ST" indicator is ON.
Tuning mode select: [AUTO]
• For KDC-HD942U1 KDC-X693! KDC-MP642U:
Switches as follows each time this button is pressed.
· For KDC-X993: Switches as follows each time thiS
button is pressed for at least 1 second.
Auto seek Automatic search for a station.
--~---..--
Preset station Search in order of the $tationsin
_se_ek ----"-----"--- the Preset memory.
Manual "Seek Mode: Manual"' Normal manual tuning control.
P!s~ ~ ~etJio lile play lunctions
Drop open the faceplate: Release
@2' Push the faceplate on the left side, and return it to its
former position.
Disc play: Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the "CD-IN" indicator is ON.
@2 .3 inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Disc ejection: r~]
~
~
• You can eject the disc for10 minutes afterswitching off the
engine.
USB device/iPod play: U58Terminai
Connecting a USB device starts playback.
@2
• For the playable audio file, media, and devices, refer to
<About Audio file> (page 45).
Pause and play: Control knob
Switches between pause and play each time this
button is pressed.
USB device removing: r~]
Press this button for 2 seconds or longer to select the
remove mode, and the remove the USB device.
During the remove mode, "USB REMOVE" is displayed.
Music search: Controlknob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio
file.)
Folder search: Controlknob
Changes the folder containing the audio file when
pushing toward
up or down.
•Fonhe operation on iPod, enter <Music Search for Wad>
(page 13) is first to enter the search mode.
Search mode:. [q 1
After pressing [q] button, you can qUickly search
songs with the Control knob. See <Music Search>
(page 13) for details.
Hands-Ireephoning
-------
Microphone:
(Accessory of KDC-X993)
The microphone forthe hands free phone is supplied.
When your voice cannotbe recognized due to the
low microphone volume
or noises in the vehicle,
adjust the microphone settings by selecting "MENU"
>"Mic Gain" of <Function Control> and HMENU" >"NR
Level" of <Function Control> (page 6).
English I5

Function Control
Functions in the table below can beset up by using Function.Control.
Displayed item is depending on currently selected
source or mode.
The mark in Condition column
shows the condition to which the item is displayed.
[§[]: Can be set in other than standby state.
1mI: Can be set in standby state.
Ell: Can be set while Audio file source of CD/USB/iPod
ED: Can be set while Audio file source of CD/USB
(excluding iPod)
1iID: Can be set while CDI Disc changer source.
1i!I: Can be set while CD source.
B1: Can be set while Disc changer source.
iB: Can be set during Tuner source.
liD: Can be set during FM reception.
em: Can be set while accessing AUX source.
GI5J :Can be set while HD Radio source.
eJ : Can be set during Satellite radio source.
am: Can be set only during playback of the iPod source.
~: Can be set for sources other than the standby
source by setting
"2 ZONE" of <Audio Setup> (page
28)
to "ON':
1I!lI: Can be set while acell-phone is connected.
..: Sets "ILM MSC SYNC in the menu to "OFF"
lEa: Refer to the reference page.
:
Can be set during all sources.
The Control knob is used for entry, but how to use
the knob varies depending on the setting items.
~ : Press the Control knob to switch the settings.
<) : Push the Control knob towards left or right to
switch the settings.
o :Turn the Control knob to switch the settings
... Press the Control knob for 1second to enter into
the setting mode.
FD: Press the Control knob for 2seconds to enter into
the setting mode.
~
~
Refer to the respective page for information on how to set
the items
with reference page number.
Only the items available
to the current source are displayed.
•The "SOUND" setting cannot be performed while
the Dual
Zone
function is used
*Factory setting
*1 Function of KDC -X993.
*2 Function of KDC -X693.
*3 Function of KDC-X693 with KCA-BT200.
*4 Function of KDC-MP642U.
*5 Refer to <Menu Glossary> (page 48).
Repeat selection and determination until your
desired setup item
is selected.
Exam pie: ---;~;;;;=====::;-
1Enter Function Control mode
Press the [FNC] button.
2Select aFunction group.
Push the Control knob towards right or left.
Pushing the Control knob towards left allows you
to set the preference items ("MENU': "SETUP': or
"SOUND").
Pushing the Control knob towards right allows you
to set the currently selected source function item
ON/OFF.
3Select your desired setup item
Movement between items Turn the Control knob.
-=-------,------,---:-:--c-------
Selection of item Press the Control knob.
------------
Return to previous item Press the [FNC] button.
Select"Return" at the bottom of the item list
In this manual, the above selection is
indicated as
Select "MENU" >"DEMO Mode'~
Each item's "o"will be "/'when the source function
is set to ON.
4 Make asetting
Push the Control knob towards up or down.
Press the Control knob to set the source function
item
ON/OFF.
Some items require you to keep pressing the
Control knob for 1or 2
seconds so that you can
make asetting. For these items, the time during
which you need to
keep pressing the Control
knob
is displayed in the Entry column in seconds.
For the functions accompanied by the
description
of the setting procedure and so forth,
the reference page numbers
are displayed.
5Exit Function Control mode
Press the [FNC] button for at least 1second.
6IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Source function item
''Wad BY HAND" "ON"/"OFF"*
\I
When set to "ON'; allows you to operate iPod with the
mm!I
14
control on the iPod.
---
..
"FILE SCAN" "ON" / "OFF"*
\I
When set to "ON'; plays the intro of the music in the
folder
successively.
"FOLDER RDM" "ON" /"OFF"*
\I
When set to "ON'; plays the music in the folder
Ell
~_£
randomly.
"ALL RANDOM" "ON" / "OFF"*
~
When set to "ON'; all songs in iPod are played at
mm!I
14
~ .. ~I
random.
"FILE REPEAT" "ON"/"OFF"*
~
When set to "ON'; plays the music repeatedly.
Ell
~_%
---
"FOLDER REP"
"ON" / "OFF"*
\I
When set to "ON'; plays the music in the folder
..
---
repeatedly.
"TRACK SCAN" "ON"/"OFF"*
\I
When set to "ON", plays the intro ofthe music on the 1m!
---
disc successively.
"DISC RANDOM"
"ON" /"OFF"*
\I
When set to "ON'; plays the music on the disc randomly. 1m!
---
"MAGAZINE RDM" "ON"/"OFF"*
\I
When set to "ON'; plays the music in the disc changer
HI
randomly.
"TRACK REPEAT"
"ON"/"OFF"*
~
When set to "ON'; plays the music repeatedly.
1m!
. J
'-'.,
"DISC REPEAT" "ON"I"OFF"*
~
When set to "ON'; plays the music on the disc
HI
'~
repeatedly.
"PTY SEARCH"
~
Select the Program Type and search for astation.
liD
17
~)
"AUTO MEMORY"
~
Memorizes 6stations with good reception
iiB
16
'~
automatically.
em
"Channel Scan"
«I
Every receivable Channel is checked for 10 seconds.
EI
42
'~'
Preference item
"MENU"
"Security Set" /
..
Sets/Resets secu rity code.
ID
25
"Security Clear"
"SRC Select" "1"*/"2"
0
Sets the source selection method.
ID
4
,-"
---
"Skip Search" "0.5%"'/
Sets the ratio of skip performed with <Music Search
mm!I
13
"1%"1"5%"1
0
for iPod>.
'~
"10%"
"Device Regist"*l
..
Register aBluetooth device (pairing).
ID
36
---
ID
"SPCL DVC Select"*l
..
Allow registration of a special device that cannot be
36
registered normally.
"Phone Selection"*l
..
Select acell-phone subject to hands-free connection.
ID
37
..
--
"Audio Selection"*l
Select the Bluetooth audio player to be connected.
37
--
"Device Delete"*l
..
Cancel registration of the Bluetooth device.
ID
38
"8T DVC Status"*l
..
Display the status of the Bluetooth device.
*5
"PIN Code Edit"*l
..
Specify the PIN code required when registering this unit
ID
36
---
using the Bluetooth device.
"Aulo Answer"*l "OFF"/"OS" -0
Answer a call automatically after lapse ofthe preset
ID
*5
"8S'" - "99S"
time interval for automatic answer.
---
"Mic Gain"*l
"-2" -"0"'-
0
Adjusts the sensitivity ofthe built-in microphone for a
*5
"+2" telephone call.
---
"NR Level"*l
1/-2
11
-"0"*-
Reduces the noises generated by the surrounding
*5
"+2"
0environment without changing the microphone
volume.
Nextpage~
English
I7

Function Control
"SP Select"*1
"Front"* /0Specify the voice output speaker.
ImI
*5
"F-R" I"F-L'
"Call Beep"*1
"ON"* /"OFF"
0Output abeep from the speaker when a
call comes in.
ImI
*5
"BT F /W Update"*1
BmI
Display the firmware version and update the firmware.
ImI
38
---
ImI
"Beep"
"OFF"/"ON"*
(>
Setting the operation check sound (beep sound) ONI
'., /
OFF.
"Clock AdJust"
BmI
Sets the clock.
26
--
"Date AdJust"
BmI
Sets the date.
ImI
26
"Date Mode"
7 types
BmI
Sets the date display mode.
ImI
26
"SYNC"
"OFF"* /"ON"
.f1.
Synchronizing the RDS station time data and this unit's
ImI
~
clock.
"DSI"
"OFF"/"ON"*
Q
DSI (Disabled System Indicator) of the unit blinks when
ImI
the faceplate is removed.
--
"llluml DIM"
"OFF" /"AUTO"*
Sets whether the illumination is dimmed in conjunction
ImI
*5
/"MNAL 1"/
0with the light switch
of the vehicle or it is dimmed
"MNAL2" constantly.
---
"ILM Effect"*1*3
"OFF"/"ON"* Sets whether the key illumination color (KDC-X9931
ImI
Q
KDC-X693) or brightness (KDC-HD942UI KDC-MP642U)
is changed in conjunction with the key operation.
"ILM MSC SYNC"
"OFF"*/"ON"
Sets whether the key illumination color (KDC-X9931
0
KDC-X693) or brightness (KDC-HD942UI KDC-MP642U)
is changed in conjunction with the sound volume.
"Display"
"OFF"/"ON"*
~
Turns off the display when no operation is performed.
*5
V
"DISP DIM"
"OFF" I "AUTO"*
Dims the display part in conjunction with the light
ImI
*5
/"MNAL 1" /0switch of the vehicle.
(_i
"MNAL2"
"Contrast"
"1" -"10"
<)
Adjusting the display contrast.
ImI
"DISP NIP"
"POSll"/"2"
(>
Switches the panel display between positive or
ImI
*5
/"NEGA1"/,,2"
negative.
"AMP"
"OFF"/"ON"*
<)
Turns on/off the bUilt-in amplifier.
ImI
*5
"Zone2"
"REAR"*I
.. n.
Specifies the destination of AUX input sound when the
tmm
*5
"FRONT"
~
Dual Zone function is turned on.
---
"AMS Control"*1*2
0Controls the connected
LX amplifier.
26
L!
---
~
"TI"*1*2
"OFF"'/ "ON"
0Switches to the traffic information automatically when
the traffic bulletin
starts.
"CRSC"*1*2*4
"OFF" I "OW*
""'"
Switches to Monaural to decrease noise when
liD
~.
reception is poor.
"Receive Mode" "AUTO"*/
Sets the receive mode of HD Radio.
Im!iI
*5
"DIGITAL'I
BmI
"ANALOG"
---
Im!iI
"Tag Memory"
"00"-"50"
0
Displays the tag memory usage of HD Radio. Up to 50 19
.~
tags can be registered to this unit.
''Tagging
"OFF" I "ON'"
0
Turns ON I OFF the tag memory function of HD Radio.
Im!iI
19
"
---
mJ
"ESN=
0
Displays the Electronic Serial Number of satellite radio.
"Name Set"
111M
Sets the display when switched to AUX source.
WtJ
12
"Scroll"
"Auto"'1
0Specifies whether the text
is scrolled automatically.
"Manual"
---
ImI
"FaVOrite Delete"
BmI
Deletes Favorite Preset Memory.
34
---
ImI
"Built in AUX"
"OFF"* /"ON"
0
Sets whether to display AUX during source selection.
---
ImI
"CD Read"
''1''* /"2"
0
Sets the CD read mode.
*5
"DEMO Mode"
"OFF" /"OW' r.
Specifies whether to enable demonstration.
27
8I
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

'0'
10
-'. __ ./
"Graphic Select
"
;'Graphlc 1 -2"
~."'"
Sets the Type Cspectrum analyzer display.
U
'.- )
"Side Select"
3 types
~'"
Sets the Type A side display,
U
"Text Select"
'0'
Sets the Type NB/C text display
10
"Status"
Appearl
'0'
Sets the Type A Status display.
10
Disappear
"Color
"All" "Variable Scan"*
j('""",'"
Sets the panel and display illumination color.
..
12
Select"*1*2
/"Color i"-
U
"Display"
"Color 10"1
'0'
Sets the display illumination color.
..
"User"
"Right"
'0'
Sets the right side of panel illumination color,
..
~-j
"Left"
0
Sets the left side of panel illumination color.
..
"SOUND" "Control" "EQ"
0
Sets the sound quality,
(][J
31
"Bass Boost" "OFF"* 1'0'
Sets the Bass Boost level in two steps,
(][J
"Stepi" -"2"
'---
"HIGHWAY-
"OFF" /"STEP1"
Compensates the low volume or bass sound being lost
(][J
*5
SOUND"
1 "2"/"3"*
0
by road noises to make vocal sound clearer.
"Supreme+" "ON"*I"OFF"
0
Turns ON/OFF the Supreme plus function.
ED
*5
1m
"Position"
j('"",,'"
Compensates the sound environment in accordance
(][J
32
U
"-.,j
with the listening position,
"Setup" "Cabin" "Compact" etc
0
Selects the car type to compensate the distance
(][J
29
difference between each speaker.
"Speaker"
0
Sets the connected speaker, speaker size, and
(][J
29
. ./
installation position.
"DTA"
0
Makes fine adjustment ofthe compensation value
(][J
30
specified at Cabin.
''X'Over''
0
Makes fine adjustment of the X'Over value specified at
(][J
30
Speaker.
"Preset" "Recall"
0Registering the
value setup by Sound Control. Recalling
(][J
33
the sound setup registered by <Audio Preset Memory>.
"Memory"
0Registering the
value setup by Sound Control.
(][J
33
---
"DSP Set" "Bypass" 10Setting "Bypass" passes the DSP function,
(][J
"Through"*
Setting "Through"activates the DSP function.
"BT"
"Voice
~
Calls by recognizing the registered voice,
..
23
Recognize"
---
"Voice Tag" "PB Name Edit"
@
Registers voice for voice recognition.
~
38
"PN Type Edit"
@
Registers voice to select the Phone number category
~
39
"-_./
in Phonebook.
"SMS" "SMS
@Download ashort
message.
..
40
Download"
"SMS Inbox"
~
Display the received short message,
..
40
:;-.-~
~
Location played with "FILE SCAN"
---
Audio file: First 10 seconds
Strong electrical fields (such as from power lines) may cause
- Music Editor media: First 10 seconds or the part picked by
unstable sound quality when CRSC is turned ON. In such aIntro
Skip
situation, turn it OFF.
During Intro Skip, turn the control knob left or right to
•
The connected cell-phone must have the SMS function to change the
song,
use the "SMS"function.
The scan method depends on the Music Editor setting.
See the Music Editor help for details.
English
,9

Display Settings
DisplayType Selection Text Display Selection
"Date"
"Blank"
Blank
Frequency & Program Service name (FM) "Frequency/PS"
Title & Artist name* (FM) "Title/ Artist"
Station name* (FM) "Station Name"
Radio text plus* (FM) "Radio Text Plus"
Radio text (FM)* "Radio Text"
Spectrum analyzer & Clock ("TYPE [A]/[Bn "Speana/Clock"
or Clock ("TYPE [Cn or "Clock"
-----
Date "Date"
~-'--------
Blank "Blank"
Frequency "Frequency"
-Sp-e'-ctr-u m--'---an--'-a Iy-ze-r -=-& ~Clo-c;-'-k (-;;:;"T:;-;;Yp:::C
E
-;;[ A~] /-;;::[B~n;--- "Spea na/Clock"
or Clock ("TYPE [Cn or "Clock"
-=-D-at-e -----'------'---=.....:....------- "Date"
--'---------
Blank "Blank"
Frequency "Frequency"
-'-S-tat-'--io-n~na'---m-e--------- "Station Name"
Title & Artist name "Title/Artist"
~A-'--Ib-um-&-Ar-tis-t -na-m-e ------- "Album/Artist"
Genre "Genre"
-'-Sp-e-ctr-um-a-n-:-aly-ze-r -=-& ~Clo-ck;-;(-;;:;"T:;-;;YP;-;:-E -;;[A-;-;] /-;;::[B~n~- "Speana/Clock"
or Clock ("TYPE [Cn or "Clock"
-=--:...:...:......:.----'~-------
Date
Changes displayed information on each source
following;
In Tunersource for KDC-X993/KDC-X693
,."",.,..",...,...,...,.....,.
*Information of Radio text plus is displayed.
In HD Radio sourcefor KDC-HD942U or
KDC-X993/KDC-X693/KDC-MP642U with
KTC-HR300
~~~
In Tunersource for KDC-MP642U
Displays 4 to 5 lines of text.
"TYPE [A]"
"TYPE [B]"
"TYPE [C]"
"TYPE [D]"
Shown below are examples of display types.
1Enter Display type selection mode
Select "SETUP" >"Display Select">"Type
Select'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2Select the Display type
Turn the Control knob.
3Exit Display type selection mode
Press the [FNC] button.
~
• For how to switch the text display information, refer to
<Text Display Selection> (page 10).
•When "TYPE [A]" is selected, the status (ON/OFF indicator
of each function) can be displayed on the first line, and
the icon
of the currently selected source and the text
information title can be displayed on the left side by the
following <Function Control> (page
6) operation.
Status display: Select
"SETUP" >"Display Select" >"Status"
Side display: Select
"SETUP" >"Display Select" >
"Side Select"
•When
"TYPE [e]" is selected, the spectrum analyzer can
be switched by the following <Function Control> (page
6) operation.
:Select
"SETUP" >"Display Select" >"Graphic Select"
"Date"
Blank
"Blank"
10 IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

•Ifthe selected display item does not have any
information, alternative information is displayed.
•When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed. (Function of
KDC-X993/ KDC-X693)
Some items cannot be selected depending on the
display type and row.
•When selecting "Folder name"while playing with
iPod, names will be displayed depending on currently
selected browsing items.
•Ifthe iPod Control by Hand Mode is set to on while
playing the iPod, "iPod by Hand Mode" is displayed.
•If all characters cannot be displayed while playing with
iPod, the file number in the list is dlsr::i1ayE'd.
1EnterText display selection mode
Select "SHU pIt >"Display Select" >
"Text Select'~
For how to select Function Control item, refer to
<Function Control> (page 6).
2Select the text display part
Push the Control knob towards up or down.
The selected text display part blinks.
3Select the text
Turn the Control knob.
4ExitText display selection mode
Press the [FNC] button.
~
In SIRIUS/ SAT source (O"tic)natl)
"Blank"
Album & Artist name
Title & Artist name
* Can be displayed only on the bottom line of "TYPE [AJ"
text.
In Audio file/ iPodsource
In Standby/ Auxiliary input source
litiiiiiiii,i I~i.;i I~ ~; #:;; 1ii4lt i.iii~
Source name "Source Name"
Clock "Clock"
--,---------
Date "Date"
------
Blank "Blank"
Music title "TITLE***"
-::CFo--cldc-e-r n-am-e------ "FLD***"
--------
File name "FILE***"
"Blank"
In XM source (Optional)
_iliiil.IIII~·I.I:11 :lI8il:I:I;1
Channel Name "CHANNEL NAME"
Title "TITLE"
------
Name "NAME"
------
Category Name "CATEGORY NAME"
Channel Number "CHANNEL NUMBER"
Spectrum analyzer & Clock ("TYPE [A]/[Bn "Speana/Clock"
or Clock ("TYPE [Cn or "Clock"
-,------
Date "Date"
-----
Blank "Blank"
English I 11

Display Settings
Function of KDC-X993/ KDC-X693
Illumination Color Selection
Selecting the Illumination Color of the panel.
1Enter Illumination color selection mode
Select
"SETUP" >"Color Select".
For how to select Function Control item, refer to
<Function Control> (page 6)
2Select the place where you want to set the
Illumination Color
Turn the Control knob and push the center
when the desired item
is displayed.
3Select the Illumination Color
Turn the Control knob and
push the center
when the desired item
is displayed.
Select the color from "Variable Scan"/ "Colorl"-
"Color 1 0"/ "User".
Creating"User" color
You can create your original color during the
selection from "Colorl"-"Color1
0:'
The color you created can be called when you
select "User':
1. Press the Control knob for at least 1second.
Enter the detail color adjustment mode.
2. Set the color.
To select the color to adjust.
(red, green, or blue)
To adjust color.
(Range 0- 9)
3. Press the Control knob.
Exit the detail color adjustment mode.
4Exit Illumination color selection mode
Press the [FNC] button.
Auxiliary Input Display Setting
Selects the display when changing to Auxiliary
input
source.
1Select the AUX source
Press the [SRCj button.
2Enter Auxiliary input display setting mode
Select "MENU" >"Name
Set'~
For how to select Function Control item, refer to
<Function Control> (page
6)
3Enter Auxiliary input display setting mode
Press the Control knob for at least 1second.
The presently selected Auxiliary input display is
displayed.
4Select the Auxiliary input display
Turn the Control knob.
"AUX"/"DVD"/ "PORTABLE"/ "GAME"/ "VIDEO"/ "TV"
5Exit Auxiliary input display setting mode
Press the [FNC] button.
Q
~
•When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
•The Auxiliary
input display can be set only when the
built~in auxiliary input or the auxiliary input of optional
KCA~S220A is used. On the KCA-S220A, "AUX EXT" is
displayed by default
• AUX source is initially set to "OFF': Before display setting,
set "Built in AUX" described
in <Function Control> (page
6) to "ON".
•Select "MENU" >"Built in AUX"
12 IKDC-X993/ KDC-HD942U1 KDC-X693/ KDC-MP642U

Musicdisc/Audio file Operation
Function of Audio file/ Internal CD source
Music Search Function
of iPod
Music Search for iPod
Search by initial
Scroll bar is displayed on the right side of the
screen.
Push the Control knob towards up for at
least 1 second.
-------
Push the Control knob towards down. Refer
to the next section <Searching for Music
by Initial>.
Opera'tio .. ·· n'ft1ni>" , .,.:
. '11"', ,?
Movement between items
~_~~ch*1
Selection of item
Return to previous item
Return to Top menu
Search for the song (in iPod) you want to play.
1Enter Music Search mode
Press the [Q ]button.
2Search for music
Audio file
nperatiOl).. .., ..• ; ¥iijj~p~tj~n::.:~i',·Jlr12;iJii; .. ;• ..... 0,;1 ••.. [
Movement between Turn the Control knob or push it towards
folders/files up or down.
~----------
Selection of folder/file Press the Control knob or push it towa rds
right.
--------,----,-
Return to previous folder Push the Control knob towards left.
Return to root folder Push the Control knob towards left for at
least 1 second.
Selecting the music you want to listen to from the
device
or media being played now.
1Enter Music Search mode
Press the [Q ]button.
"SEARCH" is displayed.
Displays the current Audio file name.
2Search for music
Cancelling the Music Search mode
Press the [Q ]button.
b'\
~
• *1 Skip Search: The number of songs to be skipped is
determined by the ratio of the total number of songs
in
the list which is selected now. Set the ratio with
"Skip Search" in <Function Control> (page 6). Keep
pushing Control knob for 3seconds
or longer skips
songs at
10% irrespective of the setting.
Characters that
are included in asong name but cannot
be displayed are left blank. If no character included in a
song name cannot be displayed, the browse item name
and digits
are displayed.
" ..... "or "~" beside the displayed folder name
indicates that this folder
is preceded or followed by
another folder.
File name is displayed with "';'''indicator.
Internal CD source
Selection of track
Return to first track
Cancelling the Music Search mode
Press the [Q ]button.
b'\
~
.Music Search cannot be performed during Random play.
'It·· .+"., ,;;q,,'Y"":' ··'+(.f 'f\l .. ,I;' ".k".
~ : ~<,-'t ;;~;:;Lwrii;th*,{r: ,,~ISP~'<~' ':1
Playlists "PLlST*'*"
Artists "ART***"
~bums ~~**~
Songs "PRGM***"
';;...\& ('· .. ··t-in' (~l·;;:¥.·
'Items·;;.;:i;.;;!,Y\'c"~lP!Y$·~
Podcasts "PDCT***"
Genres ''GEN***''
Composers "COM***"
English I13

Music disc/Audio file Operation
Function of iPod
Searching for Music by Initial
You can select an alphabetic character from the list
in the browse item (artist, album, etc.) selected now.
1Enter Music Search mode
Press the [ 0. ]button.
2Start the alphabet search
Push the Control knob towards down.
"A BC ..." is displayed.
• If you can not search for asong by an alphabetic
character
in the browse item selected now, the data on
the screen does not change.
3Select the initial to be searched for
Move to the next character. Turn the Control knob or push it towards
right or left.
--------
Move to the next row. Push the Control knob towards up or
down.
4 Determine the selected initial
Press the Control knob.
Start search. When search is completed, the music
search
mode is selected again at the selected
character position.
Cancelling the alphabet search
Press the [0.] button.
~
•The time of search by alphabet may become long
depending on the number
of songs in iPod or the folder
structure.
When selecting
an initial in the alphabet search, entering
"*,, searches symbols and entering "1" searches digits.
If the first character string begins with an article "a'; "an';
or"the" in the alphabet search mode, it is searched for in
defiance of the article.
Function of iPod
All Random
All songs in iPod are played at random.
Enter All random mode
Select "ALL RANDOM'~
For how to select Function Control items, refer to
<Function Control> (page 6)
~
~
•The time required to turn on the all random function
may become longer depending on the number
of songs
in iPod or the folder structure
•Turning on the
all random function changes the iPod
browse item to "Songs'~ This browse item will not change
even
if the all random function is turned off
Function of iPod
iPod Control by Hand Mode
Allows you to operate iPod with the control on the
iPod.
Enter iPod Control by Hand Mode
Select "iPod BY HAND'~
For how to select Function Control items, refer to
<Function Control> (page
6)
~
~
•iPod will be paused when Hand mode is turned ON
during playback.
•
In the iPod Control by hand mode, iPod cannot be
operated using this unit.
·
This mode is not compatible with music information
display. The display will show"iPod by Hand Mode';
iPod can
be operated when it conforms to the iPod
control function.
14 IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Function of remote control
Direct Music Search
Searchs the music by entering the track number.
1Enter the music number
Press the number buttons on the remote
control.
2Search the music
Press
the [~] or [~] button.
Cancelling Direct MusicSearch
Press the [~II] button.
~
•Direct Music Search cannot be performed during playing
of iPod, "Music Editor" media, Random play, or scan play.
Function of disc changers with remote control
Direct Disc Search
Searchs the disc by entering the disc number.
1Enter
the disc number
Press the number buttons on the remote
control.
2Search the disc
Press
the [FM+l or [AM-] button.
Cancelling Direct DiscSearch
Press the [~II] button.
~
•Direct Disc Search cannot be performed during playing
of Random play or scan play.
•
Input "0" to select disc 10.
Basic Operation of Disc Changer
(Optional)
Selecting CD changer source
Press the [SRC] button.
Select the "CD CHANGER" display.
Musicsearch
Push the Control knob towards right or left.
DiscSearch
Push the Control knob towards up or down.
English I15

Function of KDC-X993/ KDC-X693/ KDC-MP642U
Tuner Operation
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1 Enter Auto Memory Entry mode
Select"AUTO MEMORY':
For how to select Function Control items, refer to
<Function Control> (page 6).
2 Open Auto Memory Entry
Turn the Control knob to select "YES'~ and then
press the Control knob.
When 6stations that can be received are put in the
memory, auto memory entry
closes.
Station Preset Memory
Putting astation in the memory.
1Select the frequency to put in the memory
Push the Control knob towards right or left.
2 Enter Preset Memory mode
Press the [Q ] button.
3Select the number to put in the memory
Turn the Control knob.
4 Determine the number to put in the memory
Press the Control knob for at least 2seconds.
Cancelling the Preset Memory mode
Press the [Q ] button.
Preset Tuning
Recalling the stations in the memory.
1Enter Preset Tuning Select mode
Press the [Q ] button.
2Select a desired station in the memory
Turn the Control knob.
3Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [Q] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
2Enter the frequency
Press the number buttons on the remote
control.
Example:
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
~
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
16 IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Function of KDC-X993/ KDC-X693
PTY (ProgramType) Function
of KDC-X993/ KDC-X693
ProgramType Preset
Selecting the Program Type below and searching
for astation; Putting the Program
Type in the Preset button
memory and quick recall.
~
~
•Speech and Music include the Program type shown
below.
Music: Black character item.
Speech: White character item.
Presetting the Program Type
1Select the Program Type to preset
Refer to <PTY (Program Type» (page 17) .
2Enter ProgramType Preset mode
Press the [Q]button.
3Select the number to put in the memory
Turn the Control knob.
4Determine the number to put in the memory
Press the Control knob for at least 1second.
Recalling the preset Program Type
1Enter PTY mode
Refer to <PTY (Program Type» (page 17).
2Enter Program Type Preset mode
Press the [Q ]button.
3Select adesired Program Type in the memory
Turn the Control knob.
4Recall the ProgramType
Press the Control knob.
Function of KDC-X993/ KDC-X693
Registration of a Station as a PTY
Registering aProgram Type for stations with no PTY
data.
1Receive the station you want to register
2Select the Program Type to register
Refer to <PTY (Program Type» (page 17) .
3Register the ProgramType
Press the [FNC] button for at least 2seconds.
Confirming the Program Type
Press the [FNC] button.
The Program Type is displayed for 3seconds.
4Exit PTY mode
Press the Control knob.
,PNfli;am'J.Pi$pfaylx
Jazz "Jazz"
--=-==----
Classical "Classici"
R&B "R&B"
----
Soft R&B "SoftR&B "
--
Religious Music "ReIMusc"
Rock "Rock"
Classic Rock "ClsRock"
Adult Hits "AdltHit"
Soft Rock
"Soft Rck"
Top 40 "Top 40"
Country "Country"
Oldies "Oldies"
Soft
"Soft"
Nostalgia "Nostalga"
~l1iS?~aE:I!:i!.·.!:!
--
Music "Music"
•
.... •'
If If
..
•This function cannot be used during atraffic bulletin or
AM reception.
•When the selected Program Type is not found, "No PTY"
is displayed. Select another Program Type.
1Select PTY mode
Select "PTY SEARCH':
For how to select Function Control items, refer to
<Function Control> (page 6).
2Select the ProgramType
Turn the Control knob.
3Search for the selected ProgramType station
Push the Control knob towards right or left.
4Exit PTY mode
Press the Control knob.
English I 17

Function of KDC-HD942U
KDC-X993/KDC-X693/KDC-MP642U
with KTC-HR300 (Optional Accessory)
HD Radio tuner control
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1Enter Auto Memory Entry mode
Select "AUTO MEMORY'~
For how to select Function Control items, refer to
<Function Control> (page
6).
2Open Auto Memory Entry
Turn the Control knob to select"YES': and then
press the Control knob.
When 6stations that can be received are put in the
memory, auto memory entry
closes.
Station Preset Memory
Putting astation in the memory.
1Select the frequency to put in the memory
Push the Control knob towards right or left.
2Enter Preset Memory mode
Press the [Q]button.
3Select the number to put in the memory
Turn the Control knob.
4Determine the number to put in the memory
Press the Control knob for at least 2seconds.
Cancelling the Preset Memory mode
Press the [Q]button.
PresetTuning
Recalling the stations in the memory.
1Enter Preset Tuning Select mode
Press the [Q]button.
2Select adesired station in the memory
Turn the Control knob.
3Recall the station
Press the Control knob.
Cancelling PresetTuning
Press the [Q]button.
18 IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
2 Select Tuning item
Press the [DIRECT] button on the remote
control.
Pressing the [DIRECT] button each time switches
the following tuning items
as follows.
IICH ~"
--,------,,----,----------
4 Do Direct Access Tuning
Press the [~] or [~] button.
b\
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
HD Radio Tagging (iTunes Tagging)
Using an iTunesTagging enabled HD Radio you can
tag
your music. When you hear asong you enjoy
on your local HD Radio station, you only have to
press the Control knob. The song's information
will then be saved on this unit. The saved songs
will
then show up in aplaylist called "Tagged"in
iTunes
the very next time you sync your iPod to
your computer. So then you just need to click and
then easily buy and download the song you were
tagging directly from the Apple iTunes Music Store.
1 Enter HD Radio tagging mode
Press the Control knob.
"ITAGI"wili be indicated on the display when song
information
can be registered.
~
•Turn "ON"the"MENU" >"Tagging" of <Function Control>
(page 6) when using this function.
•Up to 50 TAGs (song's information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
•The memory usage can be checked by selecting "MENU"
> "Tag Memory" of <Function Control> (page 6).
English I19

Function of KDC-X993
KDC-HD942U/KDC-X693/ KDC-MP642U
with KCA-BT200 (Optional Accessory)
Operation of hands-free phoning
Before Use your cell-phone
to return to the hands-free talk mode.
• For details on the Bluetooth cell-phone with the
hands-free function, see <About the Cell-Phone>
(page 46).
•
You need to register your cell-phone before using
it
with this unit. For more details, see <Registering
Bluetooth device> (page
36).
•Ifyou have registered two or more cell-phones,
you need
to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 37).
• To use the Phone Book, it must be downloaded to
this unit in advance. For details, see <Downloading
the Phone Book> (page 37).
• "B1" indicator is lit when acell-phone is connected
to this unit.
Receiving acall
Answering aPhone Call
Press the [AUD] button.
~
~
•The following operations disconnect the line:
- Insert a
CD.
-Connect a USB device.
·The name
of the calling party is displayed if it has already
been registered
in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button or press the [((i'] button
for
at least 1second.
During acall
Adjusting the Voice Volume during aCall
Turn the [AUD] knob.
Call waiting
Answering AnotherIncoming Call with the
Current Call Suspended
1 Press the [AUD] button.
2Turn the Control knob or push it towards up
or down. Select
the "ANSWER" display.
3 Press the [AUD] button.
Answering anotherIncoming Call after
Terminating the CurrentCall
Press the [SRC] button or press the [Ui'] button
for
at least 1second.
Continuing the CurrentCall
1 Press the [AUD] button.
2Turn the Control knob or push it towards up
or down. Select
the "REJECT" display.
3 Press the [AUD] button.
Answering the Waiting Call after Terminating
the CurrentCall
Press the [SRC] button or press the [((i'] button
for
at least 1second.
Switching between the Current Call and Waiting
Call
Press the [AUD] button.
Each pressing of this knob switches the calling
party.
Other functions
Clearing the Disconnection Message
KDC-X993:
Press the [((i'] button.
KDC-HD942U1 KDC-X693/ KDC-MP642U:
Press the [((i'] button for at least 1second.
"HF Disconnect"disappears.
Disconnecting aCall
Press the [SRC] button or press the [((i'] button
for
at least 1second.
Switching to the Private Mode
Press the Control knob.
Switches between Private talk ("PRIVATE") and
Hands-free talk each
time this button is pressed.
E?2
•Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection.
If this happens, the source cannot be switched back to
the hands-free talk mode by operating this unit. Operate
20 IKDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U