Keofitt 550000 User manual

SOME PEOPLE WOULDN’T GAMBLE WITH THEIR SAMPLETM
User ManUal
STEAM BOILER | Item no. 550000

INTRODUCTION:
MANUFACTURER: KeottA/S,
Industrivænget 6-8
  5700Svendborg
Denmark
TYPE: SteamBoiler,itemno.550000
TheEnglishversionofthisManualisthegoverningversionanditistheonlyauthorizedversion.Consequently,KEOFITTcannot
beheldliableforotherversionsincludingtranslationsofthisManual.

1. Pourmax.250mlofwaterintothevessel(1).
2. Openthegasandignitetheburnerwiththeredignitionbutton(2).Steamisgeneratedinmax.4minutes.
3. Makesurethatthesamplingvalveisinaclosedposition.
4. Removetherubber/st.st.capsfrombothhosepiecesofthevalveandconnecttheTeontubetotheupperhose
piece.
5. ConnecttheotherendoftheTeontubetothetopoftheSteamBoiler.
6. Thesamplingvalveissterilisedafterapprox.1minuteofsteaming.
7. RemovetheTeontubefromthesamplingvalveandclosetheupperhosepieceusinganautoclavedrubber/st.
st.cap.
8. Openthesamplevalve,drawyoursampleandclosethesamplevalveafterwards.
9. Aftertherequiredsampleisdrawn,itisadvisabletorinsethevalve,forexamplebymeansofhotwaterand/or
steamagainandletitdrybeforeclosingbothhosepieceswithautoclavedrubber/st.st.caps.
Note!ItisrecommendedtouseglovesduringthesterilisingprocessasbothSteamBoiler,ttingsandsamplingvalve
becomehotduringtheprocess.

ForcompletesetofupdateddatasheetsandmanualsforKeottproductspleaserefertoourwebpagewww.keott.dk