Kettal Mia S User manual

Mia,
Table lamp S
Assembly instructions

Mia table lamp S
Description
The lamp is built around an
acid-treated glass diffuser
which is protected by a large
polypropylene lampshade.
Both are held in place by a
clever wire structure.
One of Kettal wishes was to
have the lamps completely
waterproof, which was
achieved – allowing for a
wide range of applications
and making it suitable for
outdoor use.
36,5 /14,3
Ø25,6/10
cm/inch
cm/inch
Ø23,5/9,3

Information
Designer
Michel Charlot
Collection
Objects
Reference
KS5701000
Switch On / Off
Keep your finger on the
button for a few seconds to
dim the light.
Charge
Warning
If the wire or flexible cord is damaged, it must only
be changed by the manufacturer, their Service Dept.
or qualified personnel in order to avoid risk.
This symbol on the product or its packaging indicates
that it must not be treated as household waste. It should,
in fact, be handed in at a recognised collection point for
recycling electrical and electronic equipment. For more
detailed information about the recycling of this product,
please contact your local city office, your household
waste disposal service or the shop where you purchased
the product.
LED 2,5W 3000K 300lm (included)
Mini USB connector (included)
Touch Continuous Dimmer
Battery
5 - 6 hours at maximum intensity
10 hours at minimum intensity
Battery charging time
4 - 4.30 hours
Charger recommended
Input 100-240V ~ 50/60Hz 0.2A
Output 5V 1A
Cleaning Instructions
Use a soft damp cloth, with soap or neutral detergent.
Do not use alcohol or other solvents.

Mia table lamp S
5
1 2
6
!
Click!
Click!

Warning
Be careful, please.
Hold the base to unscrew it from the glass globe.
Disconnect power supply before installation.
Designer
Michel Charlot
Collection
Objects
Reference
KS5701000
34