KFI 110400 User manual

1
Winch Display Stand
Display Stand PART # 110400
Kit Components:
Qty Part Description
1……………. Base
2……………. Center Post
2……………. Top Post
3……………. Shelf
1……………. Sign
4……………. Post Coupler
3……………. Stiffeners
1……………. Hardware Kit (HK-052)
1……………. Hardware Kit (HK-073)
INSTALLATION INSTRUCTIONS:
Assemble all hardware loose and then tighten

2
Optional Winch Display Kit:
Kit Components:
Qty Part Description
1……………. Use of one of your winches
4……………. Spacers
4……………. M8 bolts
1……………. Zip Tie
INSTALLATION INSTRUCTIONS:
1. Assemble the roller fairlead to the fairlead
bracket using the items included in your retail
box.
2. Assemble the winch to the shelf using the
supplied longer M8 bolts and spacers as shown
in the image below. You may want to use the
lock nuts that are included with your retail box.
3. Assemble the hook and KFI pull strap to the
winch cable loop using the included Zip Tie. Do
not cut the Rubber Band on the cable as this will
allow the cable to unravel when customers want
to try out the Free Spool Knob.
Zip-Tie