KHD KG100 User manual

www.khd.hk
KG100 GNSS TRACKER

www.khd.hk
Index
1. Product profile .............................................................................. 3
2. Product Overview ......................................................................... 4
2.1 Main device ........................................................................................... 4
2.2 4 Pin cable ............................................................................................ 5
3. Product Initialization .................................................................... 5
3.1 Prepare works........................................................................................ 5
3.2 Setting steps ......................................................................................... 6
4. Functions ...................................................................................... 7
4.1 Real-time positioning .............................................................................. 7
4.2 Report by timing interval ........................................................................ 7
4.3 Mileage statistics .................................................................................... 7
4.4 Stop Engine (oil) / Recover Engine (oil) .................................................... 7
4.5 Alarm functions ...................................................................................... 8
4.5.1 Over speed alarm ................................................................................. 8
4.5.2 Terminal main power cut alarm ............................................................. 8
4.5.3 Fatigue driving alarm ............................................................................ 8
4.5.4 Custom Sensor Alarm ........................................................................... 8
4.6 Remote Control Functions ....................................................................... 9
5.6.1 Terminal Status Inquiry......................................................................... 9
5.6.2 Restore to factory default ..................................................................... 9
5.6.3 Remote restart Device ......................................................................... 10
5. Accessories ................................................................................. 10

www.khd.hk
1. Product profile
Thank you for choosing the company's KG100 GPS/GLONASS
tracking products, please carefully read the instructions before
operating.
KG100 satellite positioning system combined with anti-theft, positioning,
monitor and observe, alarm for help, advertising, vehicle scheduling and
tracking functions, it’s easy to use, easy to operate, the characteristics of a
full-featured, the main applies to vehicles and other mobile object location and
tracking services.
KG100 fully supports the GSM network data transmission function, GPRS
platform can be combined with software to make it more widely used in
large-scale cluster monitoring, emergency scheduling, location-based services,
fleet management, traffic safety management and many other fields.
Product Features:
Support GPS/GLONASS real-time tracking.
Support GPRS network data transmission.
Support for multi-directional terminal parameter settings.
Support for peer-to-peer monitoring, point to group control, group
all-round monitoring of the group.
Combined with positioning, monitoring control, alarm, such as first aid and
tracking multiple functions with a full range of integrated products.
Note:
Herein after referred to as the 【default user】refers to has been set and
saved to the product of all numbers communications devices. .
If an error or a write command to send messages of non-default number of
instructions, this product will ignore it.
All input commands must be uppercase letters in English, and need to use
Standard English punctuation, must not use other input method instead of
the English punctuation. And all SMS commands are no space character
between the contents.
This product is factory default password for 【1234】, convenience-oriented
brochures to explain the following command operation for some of those
involved in your password are the product's default password 【1234】
This product is not waterproof, choose the dry location to install, and pay
attention to water moisture.
Please installed and use this product properly.

www.khd.hk
2. Product Overview
2.1 Main device
Power LED
4pin Cable
GSM antenna
GSM LED
GPS LED

www.khd.hk
2.2 4 Pin cable
Red: Power Positive pole
Black: Power negative pole
White: ACC detect
Yellow: Cut fuel Control
3. Product Initialization
After you get KG100 product, please familiar with it and test it before you install
it in a Car. Please test it according to the following steps.
4.1 Prepare works
KHD GPS/GLONASS product
Serial setting cable
Local GSM SIM card
12V DC power supplier
Computer with COM port (if do not have COM port, can use USB to serial
cable instead)

www.khd.hk
GPS client software
Teamviewer (Optional, it is used for remote assist, used when you need get
help from supplier)
4.2 Setting steps
Step1
. Insert SIM card into the KG100.
Step2
. Connect the antennas (GSM antenna and GPS antenna) to device
Step3
. Connect the power cable to 12V DC power supplier (according to the diagram
of device connection in 3.0)
Step4.
Send command to set parameters. Devices need parameters to connect to
server via GPRS, such as Server IP/Port and APN. The following table shows
commands for setting these parameters.
No.
Name Command Reply Instruct
1 Set server
IP/Port
AS1234IPPO:192.168.1.1;77
77#
IPPO:192.168.1.1;7777
OK#
Reply content is “IP” “Port”.
The last part of IP must have 3
bit, if not, add 0 in front it. Last
bit before #,
2 Set Device ID AS1234IDDO:00012345# IDDO:00012345;OK Current“ID”
3 Set APN
AS1234APN:etaslat# APN: etaslat;OK APN setting
AS1234USER:GPRS# USER:GPRS;OK
AS1234GPRSPASS:GPRS#
GPRSPASS:GPRS;OK
4 Restart Device
AS1234RSGS# GSM/restart; OK Device restart
5 Factory set ASAX*%UPAS# PASSWORD:1234;OK All parameters recover to
factory, beside IP/Port/ID/APN
6 State query AS1234STATE#
Note:
1) All the command Character must write correctly, include punctuation/super-case or
lower-case, any incorrect input will cause command error.
2) The SIM card inserted in device must open SMS function, if not open will cause all
the command do not receive and execute
3) Device default password is: 1234.
Step5.
Access the URL: http://www.khdtrack.com
Step6.
Enter the account number and password
Step8.
Add the information of the device into database (include S/N (TEID),
car no, device type … and so on)
If you have any questions, please install Teamviewer, then contact
will our technique support.

www.khd.hk
4. Functions
5.1 Real-time positioning
Monitoring center can directly locate the specified vehicle terminal call view,
in-car terminal will immediately return to the central monitoring platform details
such as vehicle location data. Location information mainly include: time,
longitude, latitude, speed, location, location signs, vehicles and terminal status.
5.2 Report by timing interval
Monitoring center can specify the car back to the terminal for data transmission
interval timing settings, factory default upload interval of 30 seconds,
adjustable range is 5-65535 seconds; if interval is set to less than “5 seconds ",
the terminal device will automatically return to the "5 seconds."
5.3 Mileage statistics
The beginning of this equipment from loading automatically calculate mileage,
and mileage statistics from time to time to report to center platform, the center
can take advice on car mileage table stored data; also the centers can clear the
vehicle mileage data stored by platform, or be derived in accordance with set
time-related mileage statistics. Mileage statistics < "16000km".
5.4 Stop Engine (oil) / Recover Engine (oil)
Monitoring center can be personalized to the designated vehicle and a remote
disconnect the circuit or to restore the circuit, when the vehicle terminal
receives instruction on the oil line or restore the circuit to take down oil
movements.
(Note: Equipment in the implementation of action off the oil when it is the first
implementation of the three sub-batch 1 seconds off the oil 【off 15 seconds】
---- restored to the 4th when completely cut off oil line)

www.khd.hk
5.5 Alarm functions
5.5.1 Over speed alarm
Traffic speed alarm refers to the device in accordance with the speed to allow
the user to set the value of constantly monitoring the vehicle speed, when the
vehicle speed exceeds preset allowable value, the device will send over speed
alarm data reported to the Center, when the speed dropped to the default
values that the abolition of alarm. Center received alarm data may confirm or
cancel the alarm. Driving speed alarm set value in the 0-255 (km) range.
5.5.2 Terminal main power cut alarm
When the vehicle power supply was cut off the terminal will issued a power off
warning in 3 seconds, at the same time start the backup battery power supply
(can last around 4 hours), again automatically detect whether the alarm is
canceled after 30 seconds, Center received alarm information could confirm
and cancel alarm.
Note: The brown-out detection voltage threshold value <7V (DC).
5.5.3 Fatigue driving alarm
Overtime drive; also known as fatigue, driving is mainly a continuous
monitoring of driver fatigue, driving out to bring the traffic safety problems.
When the alarm function to open overtime driving, driving conditions to
determine the state of ACC in the ON state duration beyond the default values,
is central issue, when the ACC began to open the device time, when the preset
value is exceeded, the device will be immediately sent to the Center of fatigue
driving alert data, the user can confirm or cancel the alarm on demand.
5.5.4 Custom Sensor Alarm
The device with 2-way accustom test line (the test line of the definition and
installation please refer to the section described in the previous installation of
the 【Connection Diagram】) in order to meet specific customer needs. When
the user needs to customize sensor alarm function can be defined according to
their own needs the name of the line alarm. As defined by the test line before it
is triggered, the device will immediately send a custom alarm to the central
data center can be confirmed after the receipt of alarm information and cancel
alarm.

www.khd.hk
5.6 Remote Control Functions
5.6.1 Terminal Status Inquiry
There have a status inquiry command in software platform, when sending this
command to device, device will reply a status code like this:
"wXtX, spX, stpX, drX, idlX, stfX, csX, alrX, ocX, msX"
It means:
wt: “w” means the position behind the monitor settings (1 timer, 2 interval, other
means of closure), “ t “interval after that value,
stp : over speed
dr: fatigue set
idl: idling set
stf: the same as protocol “stf” status
cs :the same as “ st1-st4”, 4 bytes means car staus definition
alr : The same as “82” alarm status 3 bytes
oc :cut of fuel, 1: cut off fuel;”0” means normal status
ms: program state machine status bits (0- module initialization, 2- check signals,
4- check registration, 8- gprs connecting, 10- udp connecting, 20- connecting
center or to connect to normal center on standby, 40-gprs disconnect, 80-call
state)
sp: over speed
stp : said the parking timeout threshold,
dr said driver set threshold,
idl said the idle threshold,
stf with the protocol definition stf status bits,
cs with the protocol definition st1-st4, 4 bytes of vehicle conditions and definitions,
alr with the protocol definition 82 alarm state 3 bytes,
oc-off state gasoline and electricity, 1 for off petrol and electricity, 0 is normal,
5.6.2 Restore to factory default
To restore factory settings is to clear the main terminal settings, so that

www.khd.hk
terminal back to the original state. This feature will not clear the set of the IP,
ID, APN, time zone, standby mode.
Note: double check the communication parameters are correct before restore
the factory setting
5.6.3 Remote restart Device
Abnormal when an individual terminals on-line or for other reasons need to
restart the device, the user can correspond to the terminal through the
platform to restart the instruction issued.
5. Accessories
KG100-type vehicle terminal 1 sets (built-in battery)
4 PIN control cable 1
Installation tool: A bag
Breaking the fuel Relay 1 (DC12V 40A) (If you need to 24V relay please
advise in advance) (Optional)
Other manuals for KG100
1
Table of contents
Other KHD GPS manuals