Kiiway Kii03 User manual

User Manual
Kiiway Kii03

0I. QUICK START
DOWNLOAD AND INSTALL MOBILE APP
Input “Kiiway in IOS APP store or Google play store or use a smart
phone to scan the QR code below, and install according to the prompt.

02. COMPONENTS
Watch Exclusive
Screwdriver
Charging Cable
User
Manual
Charging
Connector
Card Picker
Product parameters:
Battery capacity:350mAh
Power supply: DC 5V
Overall dimensions: 38*38.5*12mm (Not include watch strap)

03. INTRODUCTION
1. PRODUCT APPERANCE
Touch screen Function button
SIM card cover
Mic hole
Charge touch spot
Off button

2. DESCRIPTION ON ICON FUNCTIONS
Main interface Call timing
Battery Indicator Unread voice message
GSM signal strength indicator GPRS connection failure
No SIM card detected Select intercom contacts
Recording Recording failed
Voice uploading Voice uploading completed
Voice uploading failed
Watch is connecting to the
server

Voice downloading Voice download failed
Voice playing Voice play failed
Boot screen 112 call interface
Voice intercom 112 dialing
Watch info Watch ID
SOS failed
SOS SOS successful

3.INSTRUCTIONS FOR USE
(1) SIM Card Installation Instruction:
1.1) The SIM card used in the watch is Nano-SIM card only, with GPRS
compatibility and caller ID activation
(Note: This watch only supports 2G network at present.)
1.2) Take out Nano-SIM card:
1.3） Install Nano-SIM card:
Keep the sim card chip side upward and the notch direction inward
(2) POWER ON/OFF
（2）Power on/off
2.1) Power on 2.2) Power off
Off button
Press off button for
shutdown first
Remove SIM card cover
by screwdriver Push inward gently with
the card picker, SIM card
will pop up automatically
Take out
Insert the SIM card
according toindicated
direction
In ward push the card by
card picke
Fasten the SIM card cover
and reboot.
Long press the function
key for 3s tostart up

关机
(Note: If failed, please charge it first with the charger; please check the installation
of the SIM card if an icon appears on screen when booting)
(3) FUNCTION INTERFACE
3.1) Left slid the main interface.
Main interface 112 Call interface SOS interface
3.2) Right slid the main interface.
Watch info interface Voice intercom interface Main interface
(4). VOICE INTERCOM
4.1) Send a voice message
语音对讲界面单语音
击触摸屏选择界面
Gently press the power off
button to shutdown
Click touch screen
on voice intercom
interface
Voice intercom
contact interface
Left/right slid to select
contacts

住功能键开始录音松开功能键上传录音录音上传
4.2) Play a voice
(5). SOS EMERGENCY
(6) 112 Cal
(7).WATCH VIEW INTERFACE
Unread voice
message
Click this icon or Long
press the function key
to start recording
Release the function
key or touch screen to
upload voice
Recording transfer
success
If the icon in red circle
appears, it indicates unread
voice message
Click the voice intercom
interface to enter
Intercom contact
interface
Click the touch screen
to play the voice
SOS interface Click this icon or long
press the function
key to send SOS
message
SOS message and alarm
send sucessful
Click this icon or
press thefunction
key more than 3s
to call 112
112 dialing

手表信息界面单击触摸屏 SN 号表示手表编号，可用于绑定
(8). Alarm
8.1) Low power alarm: If an icon appears on screen, indicate the
watch’s battery is in low power, reminding you charge the watch in
time.
8.2) Geo-fence alarm: Watch will send alarm to caregiver when the
watch wearer enters or leaves the electronic fence area set by
caregiver.
8.3)SOS alarm: When the watch wearer encounters emergency, click o
n “SOS icon, watch will send SOS alarm to all caregivers’ mobile APP
and send SMS to caregiver’s mobile
8.4)112call : When the watch wearer encounters critical
emergency, click on “112 icon, watch will call “112 out directly,
also send SOS alarm to all caregivers’ mobile APP and send SMS to
caregiver’s mobile in the same time. The user can abort the call in
anytime by pushing on the lateral function button.
(Note: the caregiver can set the electronic fence area and emergent SOS on APP)
(9). Alarm clock
Open the mobile APP, login the setting menu and click the alarm clock
Click touch screen on the
Watch info interface
SN is the watch IDfor binding