Kinetik CIR42V-600 User manual

CIR42V-600 Color Camera
Weatherproof IR Color Camera
Specification
Packing List
No Name Model Number 2. User Guide CIR42V 1 1. Weatherproof IR Color Camera CIR42V 1
Fran hiser：
Notes:::: efore providing power to the
camera, please read this User Guide in
detail!
Do not attempt to disassemble the amera.
If the amera does not work, please onta t
your lo al fran hiser or Kineti CCTV.
Model CIR42V-600
Pick up Element 1/3" SONY Super HAD EFFIO CCDII
Effective Picture Elements
(H×V) NTSC:768(H)×494(V) AL:752(H)x582(V)
Horizontal Resolution 600 TVL Line
0.001 Lux
0Lux (with IR LED ON)
S/N Ratio More than 50dB
Scanning System 2:1 interfa e
Synchronous System Internal, Negative syn .
Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/100,000s
Gama Characteristic 0.45
IR Distance 40 Meters (with ￠5X42PCS Infrared LED)
IR Status Under 10Lux by CDS IR Power On CDS AUTO Control
Video Output 1Vpp, 75Ω
Auto Gain Control Auto
Power////Current DC12V(+/-10%)/500mA
Lens CS Lens 2.8-12mm / F2.0
Dimension (mm) 228(W)x97(H)x82(D) Weight (g) 1400 Storage Temperature -30~+60℃ RH95% MAX Operating Temperature -10~+45℃ RH95% MAX Minimum Illumination

INTRODUCTION
Congratulations on your pur hase of this ultra high
resolution IR night vision amera that utilises the latest
Sony Effio Chip set. The amera provides high definition
and stability, strong anti-jamming, ri h and real olors.
Installation and operation of this model are very straight-
forward, however please read this instru tion manual
arefully to ensure proper use of the produ t.
CONNECTING
RIEF OF PRODUCT
* * * * Sensor ((((CCD)))) Adopt SONY 1/3" EFFIO CCD Sensor. * * * * Auto Gain Control (AGC)
Built-in auto gain ontrol (AGC) ir uit. The olor amera
an get high definition pi ture in low Lux ondition.
* * * * Scanning Mode
NTSC or PAL mode.
DC12V Power Supply
Monitor CIR42V
TROU LE SHOOTING
Link wire rule：
Power Video
The symbol is intended to alert the user to the presen e of
The symbol is intended to alert the user to the presen e of
important operating and maintenan e (servi ing)
Instru tions in the literature a ompanying the applian e.
uninsulated ‘dangerous voltage’ within the produ t’s
en losure that may be of suffi ient Magnitude to onstitute
a risk of ele tri sho k to persons. Video DC12V
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER OR ACK NO USER SERVICEA-
LE PARTS INSIDE. REFER SERVICING TO OUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCKS AND RISK OF
FIRE HAZARD, DO NOT USE OTHER THAN A
SPECIFIED POWER SOURCE.
Note
MENU U DOWN
RIGHT LEFT
RESS
TOGGLE SWITCH OSD
SET
LENS MANUAL/DC/VIDEO
EX OSURE
SHUTTER AUTO,FLK,1/50,1/250,1/500,1/2000,1/40000,
1/5000,1/10000,1/100000
BRIGHTNESS 0－255
AGC LOW/MIDDLE/HIGH/OFF
D-WDR OFF/ON(LEVEL:0-63)
RETURN WHITE BAL ATW1/ATW2/AWC-SET/MANUAL:(INDOOR、OUTDOOR、MANUAL)
BACK
LIGHT
OFF
BLC:AREA SEL/AREA STATE/GAIN/HEIGHT/LEFT/RIGHT/
TO /BOTTOM
HLC:LEVEL(0-255)/ MODE(ALL DAY/NIGHT ONLY)
D C COVER THE LENS THEN RESS ENTER KRY
DAY &
NIGHT
COLOR B/W
BURST(OFF/ON)/IR SMART(OFF/ON:IR GAIN/
HEIGHT/WIDTH/LEFT/RIGHT/TO / BOTTOM)/IR
LEVEL(HIGH/LOW)
AUTO D-N(LEVEL/DELAY) /N-D(LEVEL/DELAY)
S ECIAL
CAM TITLE ON/OFF
MOTION
OFF/ON AREA SEL:AREA1-4
AREA STATE:OFF/ON
HEIGHT/WIDTH/LEFT/RIGHT/TO /BOTTOM /
DEGREE/VIEW
RIVACY
OFF/ON AREA SEL:AREA1-8
AREA STATE:OFF/ON
HEIGHT/WIDTH/LEFT/RIGHT/TO /BOTTOM /
COLOR
ARK.LINE OFF/ON(LT/LB/RT/RB/F/N/T)
IMAGE ADJ
LENS SHAD:OFF/ON
2DNR:OFF/ON
MIRROR:OFF/ON
FONT COLOR:FONT(0-15)/ID&TITLE(0-15)
CONTRAST:0-255 SHAR NESS:0-31
NEG.IMAGE:OFF/ON
DIS LAY:CRT( ED LEVEL:0-63/COLOR GAIN:0-
255)/LCD(GAMMA:0-1/ ED LEVEL:0-63/
COLOR:0-255)/USER(GAMMA:0-1/ ED LEVEL:0-
63/COLOR:0-255)
RESET FACTORY RESET
EXIT
1. No picture after power-up
May be due to a power supply voltage abnormality - please he k
voltage and polarity of onne tion. ( Warning - Reversing the
polarity upon onne tion will permanently damage the amera
and invalidate your warranty!)
2. The picture has flowing interference ripples
May be aused by power supply AC ripples or video signal
interferen e due to ground loops
Che k the monitor and peripheral equipment.
3. The picture background colour changes continually
The ele tromagneti file of fluores ent lamps an ause olour
roll. This is a re ognised phenomenon with CCD ameras. Try to
in rease the distan e between the fluores ent and the amera
position to redu e the problem.
4. Picture Smear
Can be aused by a power supply unstable voltage or maybe a
able onne tion problem or high impedan e.
!
Never point the amera dire tly at the sun as
it an damage the CCD sensor
Do not mount near a heater or radiator
!
Notes:
Please use the orre t regulated low voltage power
Supply, ensuring the polarity is orre t before onne tion
To avoid the possibility of damage due to lightning
please use an anti-surge devi e or turn off the power to
the amera during su h onditions