1. Before using M7/M9 Recorder
Please read the following instructions carefully to use the product properly and
protect the user’s safety.
1. Do not disassemble, repair, or alter the product. When malfunctions, error, or other accidents are
found to be attributable to a user, a user may not be eligible for warranty service.
2. In case of smoke or burning smells, unplug the power cable immediately.
3. Do not spray water directly on to the device. It may cause damage, fire or electric shock.
4. Keep the device away from chemicals or detergents as they may change the surface of the camera
and damage the device.
5. Avoid excessive impact and do not insert any foreign object into the device. It may cause damage
to the device.
6. When a foreign materials or sticker blocks the lens, a normal operation is not possible. Please
keep the lens clean and clear. Also, when other objects are placed around the camera, they may be
reflected on the window and included in the video images. Please do not leave unnecessary
objects around the device.
7. Make sure the camera is installed tightly and do not move the device after installation. And do not
impact excessive shock to the product.
8. Make sure to use power cable provided in the package. Other power cables may cause damage to
the product, fire or electric shock
9. Do not control or operate the device with wet hands. It may cause electric shock.
10. When a vehicle is parked, make sure to unplug the power cable of the device. Vehicle battery may
be discharged.
11. Do not operate device while driving.
12. In extreme cases like when a vehicle enters or exit a tunnel with sudden change of light, when the
light is too strong or when there is no source of light, recorded image may not be satisfactory
condition.
13. If the windscreen of the car is tinted; recorded image may be poorly defined or distorted.
14. Some accidents with very low shock or impact may not be recorded automatically
15. If the power supply was disconnected by huge scale or accident; the event may not be recorded.
