Kodak CFH-V10 User manual

Quick Start Guide

KODAK Video Monitor CFH-V10
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a ri
sk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the product.
Warning
To prevent fire or shock hazards, do not expose this product
to rain or moisture.
Do not expose the product to dripping or splashing and
never place anything containing water or liquid, such as a
vase, on the product.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
2

KODAK Video Monitor CFH-V10
Regulatory Notices for USA
This equipment has been tested and found to comply
with the limits for a digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
Quick Start Guide 3

KODAK Video Monitor CFH-V10
Camera Mounting
To mount the KODAK Video Monitor
CFH-V10 to a wall, unscrew the base
of the camera and remove the metal
plate.
With the included screws and
anchors, fasten the mounting bracket
onto the wall. Then, reattach the
base cover and screw the stand back
onto the mounting bracket.
4

KODAK Video Monitor CFH-V10
1. iSecurity+ App
To get started, download the
iSecurity+ app from Apple’s App store
or the Google Play Store.
2. Connect to Power
Connect the KODAK Video Monitor
CFH-V10 to the AC power adapter,
then plug the power cord into the
electrical outlet. Quick Start Guide 5

KODAK Video Monitor CFH-V10
3a. Wi-Fi Setup Mode
Please make sure the “Wi-Fi Setup”
switch on the back of the camera is
set to ON.
The “Wi-Fi Setup” indicator will glow
green when the KODAK Video Monitor
CFH-V10 is ready for setup. (This
may take up to 2 minutes when t
camera is first powered on.)
6

KODAK Video Monitor CFH-V10
3b. Connect to KODAK
Video Monitor CFH-V10
iPhone Android
Go to Settings -> (Wireless &
Networks for Android) Wi-Fi on your
device and connect to the KODAK
Video Monitor CFH-V10 network
(denoted by “CFH-V10” plus the last
4 digits of its CAM ID, which can be
found on the back of the camera).
Quick Start Guide 7

KODAK Video Monitor CFH-V10
4a. Launch iSecurity+ App
Once your device establishes its
connection to the KODAK Video
Monitor CFH-V10, (usually takes
around 30 seconds) launch the
iSecurity app. The iSecurity+ app will
automatically detect your camera.
When prompted, click ‘Yes’ to setup
your camera.
8

KODAK Video Monitor CFH-V10
4b. Setup Wizard
Follow the
instructions in
the Camera
Setup Wizard to
complete
installation.
4c. Camera initialization
Once you see the
page below,
follow the
directions to
initialize your
camera.
Quick Start Guide 9

KODAK Video Monitor CFH-V10
4d. Setup Complete
Once you see the page below, the
setup process has been completed.
Restart iSecurity+ and please log in
again.
You can use your iOS/ Android
devices to access the camera
anywhere in the world. Make sure
your phone has access to the internet
via 3G, 4G or Wi-Fi for internet
connection.
10

KODAK Video Monitor CFH-V10
5. Using iSecurity+
Please enter your user name and
password, created during the setup
process, in the login window to
access your KODAK Video Monitor
CFH-V10.
Quick Start Guide 11

KODAK Video Monitor CFH-V10
6a. iSecurity+ Features –
Main Window
Friends’
Cameras
Recorded
Events
App
Settings
Camera
Status
Configure
Camera
12

KODAK Video Monitor CFH-V10
6b. iSecurity+ Features –
Camera Viewer
Audio
Mute
Take a
Snapshot
Record a
video clip
Audio
Talk Back
Quick Start Guide 13

KODAK Video Monitor CFH-V10
7. Electronic PTZ Function
In order to use the Electronic Pan/Tilt/Zoom
function on the camera, you will need to
zoom in on the live video stream first.
Zooming In -
Touch the screen
with two fingers
together and slide
outward at an
angle and the
image will zoom in.
Zooming Out -
Touch the screen
with two fingers
apart and slide
inwards at an
angle and it will zoom out.
Pan/Tilt-
Swipe directional
controls to change
the camera pan
&tilt view.
14

KODAK Video Monitor CFH-V10
8. Audio Talkback
1. To use Audio Talkback,
first press the Audio button
to initiate sound to listen in.
2. Then press and hold down
the Audio Talkback button and speak
into your device, then let go for the
audio to transfer to the camera’s
speaker.
Quick Start Guide 15

KODAK Video Monitor CFH-V10
Safety Information
Do not point the camera directly at
the sun, or else it will damage the
image sensor.
Keep the camera away from heat to
avoid electric shock.
Keep the camera away from rain and
moisture.
Do not attempt to open, dismantle,
repair, or service the camera. Doing
so may cause electric shock and
other hazards.
Any evidence of misuse, abuse, or
tampering will void the Limited
Warranty.
To maintain compliance with FCC’s RF
exposure guidelines, this equipment
should be installed and operated with
minimum distance of 20 cm between
the radiator and your body. Use only
the supplied antenna.
16

KODAK Video Monitor CFH-V10
Troubleshooting
LED Status
Indicators
Wi-Fi Setup
Green:
Setup mode on
Orange:
Setup mode initializing
Light Off:
Setup mode off
Network
Green:
Connected to iSecurity+
Flashing
Green:
Connected to the Internet
Orange:
Connected to local
network
Flashing
Orange:
Not connected to any
network
Power
Green:
Power On
Quick Start Guide 17

KODAK Video Monitor CFH-V10
For More Information
For support or to learn more about
KODAK Connected Family Home
products, please visit:
www.connectedfamilyhome.com
To get the latest software updates or
to learn more about iSecurity+,
please visit:
www.isecurityplus.com
18

KODAK Video Monitor CFH-V10
Limited One Year Manufacturer Warranty
Seedonk Inc. will repair or replace (at our
discretion) your camera unit free of charge
(except shipping) for 12 months from the date
of purchase, if unit is defective. The customer
should return the defective unit to the original
place of purchase first, based on its return or
refund policy. In case the original vendor’s
return/refund policy has expired and this unit is
still within the limited manufacturer’s warranty,
customer can call 1-800-329-0223 or email us
at [e-mail] to get RMA ID and
shipping instructions. Camera must be shipped
with proof of purchase. Customer will need to
pay freight for shipping the defective camera.
Seedonk will be responsible for freight of
defective camera. In the absence of a purchase
receipt, the warranty period shall be 12 months
from the date of manufacture of the camera
itself.
In no event, shall Seedonk be liable for any
special, incidental, or consequential damages for
breach of this or any other warranty, express or
implied, whatsoever.
The detailed terms and conditions are on
SEEDONK website.
Quick Start Guide 19

Apple, iPad, and iPhone are trademarks
of Apple Inc.
Android is the trademark of Google Inc.
© 2014 Seedonk, Inc. All rights reserved
Made in China
The Kodak trademark and trade
dress are used under license
from Kodak
For more information visit:
www.connectedfamilyhome.com
Revised 11-14