Kogan KAUNIRMLCDA User manual

6 in 1 Universal Remote with LCD
KAUNIRMLCDA
User Manual
Table of Contents
Keys and corresponding functions.....................................................................................................2
Usage Notes.................................................................................................................................................3
Battery Installation....................................................................................................................................3
Operational Interfaces...................................................................................................................................3
Sub-menus...................................................................................................................................................4
emote Control Settings ............................................................................................................................4
Method A: code entry..............................................................................................................................4
Method B: manual code search............................................................................................................5
Method C: Automated Search..............................................................................................................6
Learning Function...........................................................................................................................................7
Cancelling the learning function..........................................................................................................8
Other Functions...............................................................................................................................................9
Time/Clock Function and Factory Settings.....................................................................................9
Set/Cancel Alarm Clock Function.......................................................................................................9
Key Sounds ON/OFF..............................................................................................................................10
Sound Sharing Function........................................................................................................................10
Macro Instructions..........................................................................................................................................11
Macro Settings...........................................................................................................................................12
Start/Cancel Macro Instruction Settings.........................................................................................13
Set/Cancel Key Transfer........................................................................................................................14
Low Power eminder...................................................................................................................................16
Kogan TV Linking Codes............................................................................................................................16
1

Thank you for purchasing our universal remote. This manual will explain how to set up
and use your remote control. Please keep a copy of this manual handy for future
reference.
This remote control features an LCD screen, learning functionality plus a powerful built-
in code base. Through simple settings, it can control many infra-red controlled
household appliances such as televisions, DVD players, blu-ray players,
satellite/cable/PV boxes, air conditioners etc..
Keys an correspon ing functions
2

Usage Notes
•When using the record button “ ” in a VC or DVD player, the record button
“ ” will need to be pressed and held for approximately 2 seconds.
•Once you turn on the learning function on the remote control, the built-in clock
will stop working. You will have to reset the clock after each time you use the
learn function. For this reason, we recommend you teach the remote controller
signals for as many devices as you can at one time.
•When you are connected to an A/C, the keys “ ” can be
used for learning. For all other appliances, all of the function keys are usable.
•In regards to the Learn code and the Key Transfer code, be sure to put the key in
the same storage area when using the one home appliance, so that the codes will
cover each other. When using a single home appliance, the same key cannot
store both the Learn code and the Key Transfer code concurrently.
•While using the menu, if you do not press any keys within 2~3 minutes, the
system will back out from the menu. If you do not press any keys within 5~6
minutes, the LCD screen will power off.
Battery Installation
Open the battery compartment cover as shown below, then install 3 new AAA batteries,
making sure the + and – polarities match the markings inside the compartment.
Precautions:
1. Do not use old and new batteries, or different brand batteries at the same time.
2. In the event of any liquid leaking from a battery, be sure to remove the battery
and to clean the battery compartment before replacing with a new battery.
3. Be sure to remove the batteries from the remote if you will not be using the
remote controller for a long period of time.
Operational Interfaces
There are six different interfaces for this remote controller, each suited to different
household equipment: TV, VC , SAT, DVD, CD and A/C (air conditioner). It is possible to
simply press the equipment key to select.
3

Sub-menus
Press the 'SET' key for about 5 seconds to enter the sub-menu settings. There are 10
sub-menus in total, and you can press “ ” or “ ” to shift between them.
Remote Control Settings
The remote controller can be set by three different methods (A, B or C). You can select
whichever method suits you best.
Code anges TV: 0000 – 0974 VC : 1000 – 1250 SAT: 2000 – 2998
DVD: 3000 – 3520 CD: 4000 – 4179 A/C: 5000 - 5319
Metho A: co e entry
Find the brand of your home appliance on the code list. Set for this brand from the first
code, until you can then locate the code for the specific home appliance from there. If
by setting the codes via this method you are not able to use the remote control as
expected (or if the brand of the home appliance is not in the list), then go on to use
Method B or Method C.
1. Manually turn the appliance you want to use on. Then locate the first code for
your home appliance from the code list. For this example, if the DVD player is
SONY branded, then the first code will be 3017.
4

2. Press the DVD key to switch to DVD interface.
3. Hold the SET button for 5 seconds to enter the submenu “CODE” state.
4. Press OK to enter the setup menu.
5. Enter the four figure code 3017. The remote will return to the “CODE” sub-menu
when the input is correct, and a tone will be heard. Press EXIT to exit and save
your settings. Check that all of the keys as expected (with the exception of the
equipment key and the SET key) are all valid and operating. If so, then the
settings are complete. If not, repeat steps 4-5. (A quickly repeating “beep-beep-
beep” tone will sound if the code input is wrong. If this occurs, enter it again.)
Metho B: manual co e search
1. Manually turn the appliance you want to use on. Aim the remote control at the
appliance that has been turned on. For this example, we will connect the remote
to a TV.
2. Press the TV key once to switch to the TV interface.
3. Hold the SET key for 5 seconds to enter the sub-menu “CODE”. Then press the
“ ” key to show “SEA CH”, then press the OK key. “MANUAL” will flash.
4. Press the OK key once and “CODE” will flash.
5

5. Aim the remote control at the TV, then click the “ ” key until the screen shows
“VOLUME”. Press OK to return to the MANUAL state.
Note: except for A/C (air-conditioner) showing Turned On, all other home
appliances will show “VOLUME”. Therefore, when doing settings make sure you
turn the A/C on, leaving it in standby. Other appliances can remain on their
normal operative states.
6. Check whether other keys are valid ( , EXIT, SET, equipment Key and the
confirm key excepted). If yes, press EXIT once to return to the “SEA CH” menu,
then press EXIT to exit. Settings are complete.
If not, then please repeat steps 4-6.
Metho C: Automate Search
1. Manually turn the appliance you want to use on. Aim the remote control at the
appliance that has been turned on. For this example, we will connect the remote
to a TV.
2. Press the TV key to switch to the TV interface.
3. Hold down the SET key for 5 seconds to enter the “CODE” sub-menu, then press
“ ” to set the menu screen to “SEA CH”, then press OK. At this point
“MANUAL” will flash.
4. Press “ ” once and the screen will show “AUTO”.
6

5. Press OK and the system will enter the Automatic Search mode.
Press “ ” to move to the previous code.
Press “ ” to move to the next code.
6. When the home appliance that you want the remote control to connect to turns
off, press the OK button to save the code to the particular appliance. (Note: TV's
and Satellite boxes will turn off. Air-conditioners will turn on. VC , DVD and CD
players will play.)
7. Check to see that the other buttons are valid ( , EXIT, SET, equipment key
and OK button will not function). If the remote appears to be usable, press EXIT
to return to the “SEA CH” mode, then press EXIT again to exit. The settings
should now be complete.
Learning Function
This remote control is able to learn the functions of other household appliances that are
controlled via infrared interfaces. When an interface is being set, all keys on the remote
control (with the exception of the equipment keys and SET) will have learning function
abilities.
1. Aim the appliances remote controller towards the signal window of the learning
remote at a distance of approximately 3 ~ 5cm.
2. Hold the SET key for about 5 seconds, then enter the sub-menu “CODE”, then
press the “ ” key to set the menu to “LEA N”.
7

3. Press OK, and “ ” will blink. Press OK again to enter learning mode, and “ ”
will blink.
4. Press the equipment key to switch to the appliance mode of the household
appliance to be learnt. (For example, if you are learning from your TV remote,
press the TV key).
5. Press and hold a certain function on the target remote controller to send out it's
code until the “ ” icon stops flashing, then release the key. This means the code
from the original remote has been learned.
6. Press the corresponding key to be learned on the learning remote, at which point
“ ” will blink again. Now, other keys from the remote controller can be learned.
Learn each key as required until all keys have been learned. Press the SET key
once to exit from learning mode. Press the EXIT key to return to the TV interface.
Cancelling the learning function
Press SET to shift to the TV interface hold the SET key for about 5 seconds to go into →
Settings mode press the “ ” key to go to “LEA N” mode press the OK button → → →
press “ ” to shift to the “ ” mode.
Press OK to go into “ ” mode press the key for the function that has been learned, →
at which point the “ ” in “ ” will blink once, meaning the key has been cancelled.
epeat these steps to cancel all information you want removed press SET to withdraw→
and return to the “LEA N” mode, then press EXIT to return to the TV interface.
8

Other Functions
Time/Clock Function an Factory Settings
On the TV, VC , DVD, CD, SAT and A/C pages, you can do the following:
1. Press and hold the SET key for 5 seconds to enter settings.
2. Press “ ” or “ ” on the menu, then
select CLOCK on the LCD.
2. Press “ ” or “ ” on the menu, then
select ESET on the LCD.
3. Press OK once, then press “ ” to set
the time on the clock.
3. Press OK and you will hear a beep. The
remote controller will regain factory settings.
Press EXIT to go back and return to the menu.
4. Press “ ” or “ ” on the menu to
set the hour and minute.
5. Press OK once to complete the settings.
6. Press EXIT to return to normal mode.
Set/Cancel Alarm Clock Function
1. Press SET for 5 seconds to enter “SETTINGS” mode.
2. Press “ ” or “ ” on the menu to select “ALA M” mode.
3. Press OK once, then press “ ” to set the alarm clock.
4. Press “ ” or “ ” on the menu to set the hour and minute.
5. Press OK, then press “ ” once.
6. TU N ALA M ON: press OK
once to turn the alarm on, then
press EXIT. The screen will
display “ ”.
6. TU N ALA M OFF: press OK to
cancel the alarm, then press EXIT.
The screen will no longer display
“ ”.
9

Key Soun s ON/OFF
1. Hold the SET key for 5 seconds to enter “SETTINGS” mode.
2. Press “ ” or “ ” to select “SOUND”.
3. Press OK, then press “ ”.
4. SOUND ON: press OK once to
turn sound on, then press EXIT.
4. SOUND OFF: press OK once to
turn sound off, then press EXIT.
Soun Sharing Function
After setting this function, you can take control of the sound volume on four different
home appliances (VC , SAT, DVD and CD) by using the volume keys on the TV.
Note: This function has no effect on air-conditioners.
This example is using the DVD player.
1. Press the DVD button to switch to the DVD interface.
2. Hold the SET button for 5 seconds to go into settings mode.
3. Press “ ” or “ ” on the menu or select the mode on the LCD.
4. Press the OK button once, then press the “ ” button on the menu.
5. Press OK to turn Sound Sharing
on, then press EXIT to return to
the previous menu.
5. Press OK to turn Sound Sharing
off, then press EXIT to return to
the previous menu.
Note: after turning on the sound sharing function, the sound keys on the Settings
interface (VOL+, VOL- and mute) can all be controlled by the volume keys. When you
replace the batteries, you will need to redo the settings.
10

Macro Instructions
This remote controller has four multi-function keys: M1, M2, M3 and M4. Each multi-
function key can store 15 key codes. This function allows you to integrate many
continuous or routine key control motions into one. After finishing the settings, if you
press your pre-set multi-function key, this remote controller will emit your pre-set
control codes in their set order.
Notes
•The macro instruction keys are not affiliated with any particular home appliances.
Therefore, when you press the macro instruction keys, no matter which interface
the remote is running under, the same instruction codes will be sent out.
•When a macro is triggered, the top right corner of the LCD screen will display
“M”. If the timing function for the macro instruction has been turned on, the
screen will display “TM”. To view which macro instructions have been equipped
with timing functions, you can enter the “Mx ADD” menu. If any of the macros
have timing functions, the screen will display “ON” next to it.
•When adding a macro instruction, the added instruction is displayed under the
current code of the current home appliance. Once successfully added however,
the current home appliance will have no bearing on the instructions being sent.
11

Macro Settings
Example 1: Operating steps: switch on the power to the TV set shift between TV/VC →
switch on the power to the VC start playing, using multi-function button M1 to take→ →
control.
1. Press the TV button once to switch to the TV interface.
2. Press the SET button for 5 seconds to enter the sub-menu, then press “ ” or
“ ” to set the menu to MAC O, then press OK.
3. Press the “ ” button.
4. Press OK again. The LCD will display [M1 00].
(If the display does not show M1:00, press the equipment button to adjust)
5. Press ON/OFF until the LCD displays [M1 25], then release the button. The LCD
will now display [M1 01].
6. Press the TV/AV button until the LCD displays [M1 25], then release the button.
The LCD will now display [M1 02].
7. Press SET once, and the LCD will display [M1 TM].
8. Press EXIT twice to return to the TV interface. Press VC once to go into the
VC interface.
9. Press SET for 5 seconds to go into settings mode.
10. Press “ ” or “ ” to set the menu to MAC O.
11. Press OK, then press “ ” and the LCD will display [M1 ADD].
12. Press OK again, and the LCD will display [M1 02].
13. Press ON/OFF until the LCD displays [M1 25], then release the button. The LCD
will display [M1 03].
14. Press “ ” until the LCD displays [M1 25], then release the button. The LCD will
display [M1 04].
15. Press SET once. The LCD will display [M1 TM].
16. Press EXIT twice, returning you to the VC interface. You can now use the M1
multi-function button to switch on the TV, shift from TV to VC , switch on the
VC and start playing whatever is in it.
12

Start/Cancel Macro Instruction Settings
1. Press the SET button for 5 seconds to go into settings mode.
2. Press “ ” or “ ” on the menu to select the MAC O mode.
3. Press OK, then press “ ”.
STA T MAC O INST UCTION
4. Press OK to start the multi-
function button function. At this
time, only the M1, M2, M3 and M4
buttons will serve as multi-
function buttons. The home
appliance specific buttons will
be non-functional.
CANCEL MAC O INST UCTION
4. Press OK to cancel the multi-
function button function. At this
time, the M1, M2, M3 and M4 buttons
will not function as multi-function
buttons. The home appliance
specific buttons will be functional.
5. Press EXIT to store settings
and withdraw from the settings
state. The LCD will display “M”
which means the multi-function
button settings have started.
5. Press EXIT to store settings and
withdraw from the settings state.
The “M” on the LCD will disappear,
meaning the multi-function button
settings have been cancelled.
Example 2: Automatically turn the TV on and play the show on Channel 10 at 7:30pm.
1. Press the TV button once to switch to the TV interface.
2. Press the SET button for 5 seconds to enter the sub-menu state, then press “ ”
or “ ” to set the menu to MAC O, then press the OK button.
3. Click the “ ” button on the menu.
13

4. Press the OK button again, and the LCD will display [M1 00].
(If the display is not showing M1-00, press the equipment key to adjust).
5. Press the ON/OFF button until the LCD displays [M1 25], then release the button.
The LCD will display [M1 01].
6. Press the “ ” button until the LCD displays [M1 25], then release the button.
The LCD will display [M1 02].
7. Press the 1 button until the LCD displays [M1 25], then release the button. The
LCD will display [M1 03].
8. Press the 0 button until the LCD displays [M1 25], then release the button. The
LCD will display [M1 04].
9. Press the SET button until the LCD displays [M1 TM].
10. Press “ ” or “ ” on the menu to set the time clock:
11. Press “ ” or “ ” on the menu to set the hour and minute:
12. Press OK to complete the settings.
13. Press the EXIT button to return to the TV page.
14. Aim the transmitting end of the remote controller at the TV. When the remote
controller clock reaches 19:30, the remote controller will turn the TV on and play
the program on Channel 10.
Set/Cancel Key Transfer
Transferring the function button of a home appliance to the function button of another
appliance.
Notes:
1. The button transfer code and learning code are both X999. After starting the
button transfer function, you may have to set a code before using the button
transfer function. The TV code is pre-set to be 0999, the VC code is pre-set to
be 1999, the SAT code is pre-set to be 2999, the DVD code is pre-set to be 3999
and the CD code is pre-set to be 4999.
2. When doing the button transfer, be sure to use a code that is NOT X999.
3. When doing the button transfer, the user will be reminded to choose a home
appliance. emember that the code to be transferred will be the currently set
code for the home appliance in question. If the current code is X999, then you
cannot perform the button transfer.
4. No button transfer functionality is available for the air-conditioner.
14

Example: Transferring the information from the “6” button of the SAT to the “7” button
of the VC , then cancelling the transfer.
1. Press VC once to switch to the VC interface.
2. Press the SET button for 5 seconds to enter the CODE sub-menu, then press the
OK button.
3. Enter a four digit code 1999. If the code entered is correct, you will hear a beep
sound and the system will return to the CODE sub-menu.
4. Press “ ” or “ ” on the menu to select the KEYMOV mode.
5. Press OK, then press the “ ” button.
SET BUTTON T ANSFE
6. Press the OK button once and the
LCD screen will display:
CANCEL BUTTON T ANSFE
6. Press the OK button once and the
LCD screen will display
7. Press the “” button on the menu,
and the LCD will display SAT.
7. Press the button whose
information was transferred. The
LCD will display:
epeat this step to cancel the
transferred button information.
8. Press the OK button. The LCD
will display F KEY. Press the
function button 6 and the LCD will
display TO KEY, then press the
function button 7. epeat this step
to transfer the target button.
8. Press the SET button and the
LCD will display KEYMOV.
9. Press the SET button. The LCD
will display KEYMOV. Then press
EXIT to return to the VC page.
9. Press the EXIT button to return to
the normal operational state.
15

Low Power Remin er
When the battery is running low on power, the screen will show a “ ” icon, notifying
you that the battery power is low and you should consider changing it over for a fresh
battery when you next have the opportunity.
Kogan TV Linking Co es
If you are using this remote to link to your Kogan.com TV, please compare the remote
control to the table below and overleaf to find the correct remote. The code is shown
below the remote control image.
1963 1964 1965 1966 1967 1968
16

1969 1970 1971 1972 1973 1974
1975 1976 1977 1978 1979 1980
If you have any further questions or concerns regarding the use of this product, please
contact the Kogan.com customer support team.
17