Kohler C3-035 User manual

-1-
Kohler reserves the right to change marked dimensions without prior notice.
>25
<75
370-400
135-165
468-498
32
63 369
230
135-165
290
452-483
506
78 40
Thank you for choosing Kohler Company. Kohler craftsmanship offers you a rare combination of proven performance and
graceful sophistication that will satisfy you for years to come. The quality and dependability of your Kohler toilet seat will
surpass your highest expectations. We're very proud of our products here at Kohler and we know you will be too.
Please take a few minutes to study this manual. Pay special attention to the Care and Cleaning instructions.
All information in this manual is based upon the latest product information available at the time of publication. At Kohler, we
constantly strive to improve the quality of our products. We reserve the right to make changes in product characteristics,
packaging or availability at any time without notice.
INSTALLATION INSTRUCTIONS
C3-035 MANUAL BIDET SEAT
K-28010K
ROUGHING-IN
BEFORE YOU BEGIN
Reference Value UNIT: mm
KOHLER CHINA INVESTMENT CO., LTD
NO.158, JIANG CHANG SAN ROAD, JING’ AN DISTRICT, SHANGHAI, PRC
POST CODE: 200436
© Copyright Kohler China Investment Co., Ltd. 2020
1445659-X2-A

INSTRUCTION
-2-
1Screw
Washer
Adjusting
Plate
Mounting
Plate
Mounting
Plate
Anchor
Seat
Inlet Hole
T-Valve
Angle
Valve
Hose
1222171-X2-B
INSTALLATION
Slide the bidet seat onto the mounting plate until you feel
it snap into place.
Connect the T-valve to the toilet seat supplied with
hose. Connect the water supply to the T-valve.
Front wash: twist the knob counterclockwise for front wash and its corresponding water pressure adjustments.
Rear wash: twist the knob clockwise for rear wash and its corresponding water pressure adjustments.
Stop: restore the knob to the default position to stop the front / rear wash.
Secure the mounting plate over the inserts of the toilet
bowl with the screws and the washers provided.
Tighten the screws with a screwdriver.
1445659-X2-A
2
3
Front Rear
Knob

DISASSEMBLY
-3-
Push the quick release button and slide the bidet seat out of the mounting plate.
Care and Cleaning
CAUTION: Risk of product damage. Do not stand on the toilet seat. The weight could damage the hinges..
Strong Acid Strong Alkali
Quick Release Button
1222171-X2-B
IMPORTANT CONSUMER INFORMATION
The toilet seat may be completely removed for a complete cleaning. Refer to the "Disassembly" section for detailed information.
Clean the outside surface of your toilet seat with mild soap and warm water. Wipe the entire surface completely dry with a clean,
soft cloth. You may use soft abrasive cleaners when necessary to clean your toilet seat. Do not use strong abrasive cleaners, as
they will scratch and dull the surface. Wipe surfaces clean and rinse completely with water immediately after applying cleaner.
If the surface becomes excessively dirty, please use a general purpose cleaner.
Take care with seat open and close. Overforce may crush the seat.
Avoid direct exposure to strong light such as ultraviolet lamp.
1445659-X2-A
Bang Bang

K-28010K
© Copyright Kohler China Investment Co., Ltd. 2020
1445659-X2-A
>25
<75
370-400
135-165
468-498
32
63 369
230
135-165
290
452-483
506
78 40
C3-035
-4-

1445659-X2-A
2
3
-5-

1445659-X2-A
-6-