KUSUDICO KUS03/3-7002 User manual

Page 1 of 2
Made in South Africa Latest Instructions at www.kusudico.co.za
Studio Bike Rack.
Product code KUS03/3-7002
Assembly hardware:
4 x Nail Anchor Screws
Components in Box:
2 x Studio Bike Rack Brackets
1 x Studio Bike Rack Body
Thank you for purchasing the Studio Bike
Rack. This page lists all the contents
included in the box, please take the time to
identify the hardware and contents per box.
step 2
Place the top Studio Bike Rack Bracket
on the marked holes and ensure it is straight
with the metal lip facing upwards. Fasten the
Bracket into the wall with the provided
2 x Nail Anchor Screws.
step 1
Mark the holes on a wall with
a pencil as per measurements
given here. Each Studio Bike
Rack Brackets have a screw
distance of 20mm apart.
The Brackets locate into the
Studio Bike Rack Body with
an offset of 1180.00mm from
bottom to top hole.
We recommend you install
your Studio Bike Rack
500.00mm from floor height.
1180mm
500mm
20mm
20mm
20mm

Page 2 of 2
Made in South Africa Latest Instructions at www.kusudico.co.za
step 5
Ensure your is fastened Studio Bike Rack
straight and hanging sturdily on the wall.
step 4step 3
Lift the aligning with Studio Bike Rack Body,
both brackets. Press the back firmly against
the wall and softly locate downwards into the
Studio Bike Rack Brackets gently.
Studio Bike Rack.
Product code KUS03/3-7002
step 6
Gently Lift your Bicycle onto the rack, ensuring
the wheel is located into the wooden hook and
the tyres are resting flush onto the body.
Fasten the bottom Studio Bike Rack
Bracket to the wall also. Your Brackets should
now align perfectly into the cavities of the
Studio Bike Rack Body.