KVH Industries TracPhone LTE-1 User manual

KVH TracPhone®LTE-1 Quick Start Guide
LTE that Goes
the Distance

Welcome to a new way to stay connected
even as you leave the shore behind.
Discover how you can use the TracPhone LTE-1
to stay in touch via phone, social media,
messaging, and the Internet.
Get ready for the adventure!

Line up QR code label on blue line.
Activate Your System
Congratulations on choosing TracPhone LTE-1.
It’s time to get it activated!
To get started, turn off your TracPhone LTE-1.
Using an Internet-connected mobile device or
computer, either scan the QR code to the right or
enter the following url: www.kvh.com/LTEactivate
Upon submission of your activation order, your
TracPhone LTE-1 will typically be activated in
less than fifteen minutes.
After receiving your activation confirmation,
turn on your TracPhone LTE-1 and enjoy.
If you have any questions or concerns, please
contact KVH Airtime Services.
Refer to the
“Help” feature
available in the
LTE Manager
App or website
for operational
information.
KVH Airtime Services
Hours: 6:00 PM Sunday to 5:00 PM Friday (ET)
Phone: [phone]
Email: [email protected]
Line up QR code label on blue line.
PRELIMINARY
CHECK PRINT ONLY
4/27/18
FROM SOURCES OTHER THAN KVH. THIS DRAWING AND/OR SPECIFICATION MAY NOT BE REPRODUCED,
NOTICE: THIS DRAWING AND/OR SPECIFICATION IS THE PROPERTY OF KVH INDUSTRIES. ALL
INFORMATION CONTAINED HEREIN WHICH IS NOT KNOWN GENERALLY IN THE FIELD OF KVH SHALL BE
CONFIDENTIAL EXCEPT TO ANY EXTENT TO WHICH IT IS ESTABLISHED TO HAVE BEEN KNOWN PREVIOUSLY
COPIED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION
SW: 26-0675-04
R. JONES A0
DO NOT SCALE DRAWING
TOLERANCES ARE:
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED
LABEL QR CODE LTE-1
FRACTIONS DECIMALS ANGLES
MATERIAL
FINISH
.XXX
.XX
CONTRACT NO.
QUALITY
CHECKED
DRAWN
APPROVALS
SCALE:
S. LEE SHEET 1
DWG NO.
Middletown, Rhode Island 02842
KVH Industries, Inc.
CAGE CODE
SIZE
B
DATE
72197 REV.
1
A
234
B
C
D
A
B
C
D
4 3
OF
2 1
D. CUNNINGHAM
2:1
LTE-1
26-0675-04
SEE NOTE 2
4/24/18
ANSI/ASME Y14.5-2009
THIRD ANGLE PROJECTION
1
SEE NOTE 1
IN ACCORDANCE WITH
J. CABRAL
INTERPRET DRAWING
MANUFACTURING
REVISIONS
ZONE REV. DESCRIPTION DATE APPROVED
- A0 REVISED PER ECO 12498
CHANGES TO THIS DRAWING MUST BE INCORPORATED
IN THE APPLICABLE KVH SOLID MODEL
NOTES:
UNLESS OTHERWISE SPECIFIED
1. MATERIAL: MAKE FROM KVH PART #26-0675 (BRADY LABEL THT-19-434-1)
2. FINISH: LABEL SHOWN IS A REPRESENTATION. USE KVH INTERFACE 74-0150 TO GENERATE LABEL.
BLACK MARKING ON SILVER LABEL. CONTRAST PER MIL-STD-130.
3. PRINT LABEL USING LABEL MANUFACTURER'S RECOMMENDED THERMAL TRANSFER ROSIN BASED RIBBON.
NOTES:
UNLESS OTHERWISE SPECIFIED
1. MATERIAL: MAKE FROM KVH PART #26-0675 (BRADY LABEL THT-19-434-1)
2. FINISH: LABEL SHOWN IS A REPRESENTATION. USE KVH INTERFACE 74-0150 TO GENERATE LABEL.
BLACK MARKING ON SILVER LABEL. CONTRAST PER MIL-STD-130.
3. PRINT LABEL USING LABEL MANUFACTURER'S RECOMMENDED THERMAL TRANSFER ROSIN BASED RIBBON.
2.000
3.000
000000001
•••••••••

Get Online
Option A
Use the Wireless Connection
Connect to the LTE-1’s built-in
Wi-Fi network (see Manage Your
Network, Data & Alerts on how
to change your Wi-Fi password
and rename the LTE-1 network).
Option B
Use the Ethernet Connection
Connect your computer
directly to the Power over
Ethernet (PoE) Injector’s
LAN port.
Option C
Use an Existing Network
Connect your Wi-Fi router to
the PoE Injector’s LAN port,
then connect your computer
to the boat’s network.
(Refer to Installation Guide for details.)
For the highest speeds, use Option B or C.
Existing Network
(LAN)
(Optional)

Manage Your Network, Data & Alerts
Check Data Usage - View your current month’s
data usage.
Manage Alerts - Set up data usage and overage
alerts via email and/or text message.
Change Wi-Fi Settings - Change the built-in
Wi-Fi network name (SSID), network password,
and security encryption.
Set Network Configuration - Turn on/off DHCP
and change the IP address.
View and manage your boat’s network usage and settings from anywhere via the
LTE Manager App or via the LTE Manager website, which allow you to:
Get the LTE
Manager App for
your iOS or Android
devices or visit
lte.mykvh.com.
Log in with the email
and password you
set during activation
and take control of
your adventure!
!
The current signal strength and
service is always visible at the top
right of the LTE Manager.

LTE-A

Set up Wi-Fi Calling
Make and receive voice and FaceTime®calls plus send and receive text messages using your
phone with the convenience of Wi-Fi Calling. Simply turn it on and connect to the LTE-1 network.
Android Phone
1. Tap the Phone app.
2. Navigate to Settings > Wi-Fi Calling.
3. Set Wi-Fi Calling to Ready for Calls.
iPhone
1. Navigate to Settings > Phone > Wi-Fi Calling.
2. Turn on Wi-Fi Calling On This iPhone.
Android Phone
iPhone
Phone setting screens may vary.
To use Wi-Fi Calling on other devices (tablets, etc), see device’s user manual.

Additional Information & Support
User Documentation
This guide provides basic operation information for the TracPhone LTE-1 system.
For complete installation, setup, operation, and diagnostics information, refer to
the Installation Guide or the system’s comprehensive “Help” feature, available through
the LTE Manager website or App.
Online Resources:
Activate Service Customer Support View and Manage Your Usage
kvh.com/LTEactivate kvh.com/customersupport lte.mykvh.com or use
iOS or Android LTE Manager App
(Requires login/password)
Technical Support: Phone: [phone] Email: [email protected]
Hours: Mon.-Fri., 9am-6pm; Sat., 9am-2pm ET
KVH Industries, Inc. • Middletown, RI • U.S.A • www.kvh.com

It’s time to search for adventure, not a signal!
Share your adventure with us at #AdventureAwaits
© 2018 KVH Industries, Inc. All rights reserved. KVH, TracPhone, myKVH and the unique light-colored dome with dark contrasting baseplate are trademarks of KVH Industries, Inc.
All other trademarks are the property of their respective companies.
54-1275 Rev. A