Kyani KynectTAB 32013G User manual

1
KynectTAB 32013G

2
KynectTAB 32013G
Contents
Welcome
Important Notices
Keys and Functions
I. Getting Started
1.1 Turning your KynectTAB on and o
1.2 Sleep Mode
1.3 Connecting to your computer
II. Your Home Screen
2.1 Changing the wallpaper on the home screen
2.2 Adding/Deleting Applications
2.3 Adding widgets to the home screen
III. Network Connection
3.1 Wi-Fi
3.2 Bluetooth
3.3 3G Network
IV. Internet Browsing
4.1 Internet Browsing
V. Multimedia Functions
5.1 Music
5.2 Video
5.3 Gallery
5.4 Camera
VI. Settings
VII. Battery
Troubleshooting
2
2
3
4
4
4
5
5
6
6
6
7
7
8
9
9
9
10
10
10
12
12
14
15
16

3
KynectTAB 32013G
Congratulations on purchasing your Kyäni KynectTAB. Your Kynect-
TAB is pre-loaded with information, tips and tutorials to help you
get started in your Kyäni business plus other basic applications to
help you do business on the go. Your KynectTAB uses the Android
4.1 operating system and you can visit the Play store at any time to
download other applications you would like to use.
Your KynectTAB is also 3G enabled, so just install a SIM card and you
will be able to connect anywhere, any time.
Before you get started, please read this user manual carefully. If you
have any questions visit the FAQ on www.kyanikynect.com/faq
or contact our customer services team.
KynectTAB 32013G

4
KynectTAB 32013G
Important Notices
• To get the best battery performance from your KynectTAB we
recommend you condition the new battery by connecting your
KynectTAB to a power source and allowing it to charge fully. Allow
it to discharge fully before you connect it to a power source again.
Repeat this three times.
• We recommend you adjust the volume settings on your Kynect-
TAB when using it with earphones. If the volume is too high it may
cause hearing damage.
• When uploading or downloading data to your tablet ensure that
you have a stable internet connection and do not disconnect
suddenly. Interrupting the internet connection could cause errors
in the information being transferred.
• We recommend you make a good impression by keeping your
KynectTAB clean. Do this using an approved screen-cleaner.
- Do not dismantle your KynectTAB, and do not use alcohol,
thinner or benzene to clean its surface.
• Some activities require your full attention. So does your KynectTAB.
For safety reasons please do not use your KynectTAB while driving
or walking.
• We have made your KynectTAB as versatile as possible but please
note:
- It is not moisture and water resistant, so please do not use it in
a damp environment.
- It will be damaged by being dropped, so do not drop it on
anything hard and keep the screen away from objects which
may scratch or damage it.
• A lot of time has gone into carefully programming your KynectTAB.
Please do not edit the rmware installed on it. This could damage
your tablet and the information you have saved on it.

5
KynectTAB 32013G
Keys and Functions
1. Front Camera
2. Volume + key
3. Volume - key
4. Rear camera
5. Earphone Socket
6. SIM SLOT
7. Power and lock key
8. Power jack (DC input)
9. micro USB
0,3M pixel rear camera
Press to increase the volume
Press to decrease the volume
2 megapixel backward-facing camera
Socet to connect your earphones
Slot to insert a SIM card
Press to turn on or o the screen
Hold and press to turn on or o your
KynectTAB.
Connect the 5V power adapter
provided
Connect to a computer via the USB
cable to transfer data.
Supports USB OTG (On-The-Go) to
connect to a mouse, keyboard, USB
ash drive

6
KynectTAB 32013G
10. mini HDMI
11. TF card slot
12. Reset
13. Microphone
14. Speaker
Connect to TV using an HDMI cable
Slot for your Micro SD memory card
Press to reset your KynectTAB if it
freezes or behaves abnormal
Microphone
Speaker
I. Getting Started
1.1 Turning your KynectTAB on and o
1.1.1. Turning your KynectTAB on
To turn on your KynectTAB, press and hold the power key on the
right side of the screen. Once your KynectTAB is on it will display an
image of a padlock in a circle. Use your nger to drag the padlock
out of the circle and unlock the screen.
Use your nger to drag the lock out of the circle to unlock.
Drag the lock to right to get to the home screen.
Drag the lock to left to go directly to the camera.
1.1.2 Turning your KynectTAB o
To turn o your KynectTAB, press and hold the power button until
the message, “Would you like to shut down?” appears then tap “OK”.
→

7
KynectTAB 32013G
II. Your Home Screen
1.2 Sleep Mode
To save battery, you should put your tablet in sleep mode by turn-
ing o the LCD display. To do this, shortly press the power key. Press
it again to wake up the screen.
1.3 Connecting to your computer
You can transfer media les between your KynectTAB and your
computer using the micro USB cable supplied.
If your computer is running the XP operating system you will need
to install Windows Media Player 11 onto your computer before you
can transfer media les.
a b c
d e f g h i j k l m

8
KynectTAB 32013G
f. Volume -
g. Volume +
h. Recent operations
i.Time
j. Wi- Signal
k. 3G Signal
l. Bluetooth
m. Battery Status
Tap to lower the volume
Tap to increase the volume
Tap to show your recent operations
Time
Shows the strength of the WIFI signal
when connected to WIFI.
Shows the strength of the 3G signal
when 3G is turn on
Will show when Bluetooth is turned
on
Shows battery status
2.1 Changing the wallpaper for your home screen
Place and hold your nger in any blank space on the home screen,
a list will appear; you can select your new wallpaper from Gallery,
live Wallpapers or Wallpapers.
2.2 Adding and deleting applications on your home screen
There are several apps (applications) which appear as defaults on
your home screen, for convenient access to the apps you need the
most you can add your favourites to the home screen and delete
those you do not use.
To add an app to your home screen tap the Apps launcher in the
top right corner and go to the all apps panel, then simply tap and
drag the app you want to add onto to the home screen.
To delete an app from the home screen, tap and hold it, and then
move it using the remove icon
a. Google Search
b. Voice Search
c. Applications
d. ESC key
e. Home
Tap to enter the Google search page
Tap to activate voice search
Tap to view your applications
Tap to return to the previous screen
Tap to return to your home screen

9
KynectTAB 32013G
2.3 Adding widgets to the home screen:
There are many widgets available such as an analogue clock,
bookmarks, calendar, and email widgets. You can access these at
any time from the Apps launcher and you can also add them onto
your home screen. Go to the Apps launcher in the top right corner
of your home screen and select Widgets, then drag and drop those
you want easy access to onto your home screen.
Tip: The home screen on your KynectTAB, has four dierent sections
which you can access by sliding your nger left or right in your home
screen. You can also drag apps and widgets onto these panels.
III. Network Connection
3.1 Wi-Fi
Wi-Fi can only be used when connected to a Wi-Fi Access Point (AP)
or Wi-Fi hotpot.
3.1.1 Turning on Wi-Fi
Within the App Panel, tap Settings then Wi-Fi to turn on Wi-Fi.
Your KynectTAB will list the networks it nds within range. Tap a
network to connect to it. If necessary, enter the Network SSID, Secu-
rity, and Wireless password, and tap “Connect”. When your tablet is
connected to the network, the wireless indicator appears in the
status bar. Waves indicate connection strength. If you do not nd
the network you are looking for and need to rescan for available
networks, tap “scan”.

10
KynectTAB 32013G
3.1.2 Turning o Wi-Fi
To save battery power we recommend you turn o Wi-Fi when you
are not using it. To turn Wi-Fi o go to Settings then Wi-Fi and touch
the O/On button.
3.1.3 Adding a Wi-Fi network
You can also add a Wi-Fi network under “Wi-Fi settings”. In “Wi-Fi
settings”, tap “Add network”. Enter the SSID (name) of the network.
If necessary, enter the security or other network conguration
information. Touch Save.
Note: The network status icon turns blue if you have a Google
Account added to your KynectTAB and the tablet is connected to Google
services. Add a Google account if you wish to sync your Gmail, calendar
events, contacts, and settings etc.
3.2 Bluetooth
You are able to transfer les between your KynectTAB and other
devices using Bluetooth.
3.2.1 Making your device discoverable
To start using a Bluetooth device with your KynectTAB you must
pair your KynectTAB to the device. Once paired your KynectTAB and
device will stay paired until you unpair them.
Under “Settings”, choose “Bluetooth settings”. Tap “Bluetooth”to turn
Bluetooth on and tap “Search for devices”. The Bluetooth indicator
will then appear in the status bar.
3.2.2 Searching for devices
After Searching, there will be a list of all Bluetooth devices within
range. If the device you want to pair to is not on the list, ensure that
the device is turned on and set to be “discoverable”.