Kygo Life Xenon User manual

Xenon user guide
Active Noise-Cancelling Headphones


Kygo Life unites my love of music with modern Scandinavian
design. The aim is to develop top–quality audio equipment that
sounds amazing and looks great. Future classics that capture the
euphoric feeling of my music.
Like my approach to everything, Kygo Life is driven to continually
improve. So as each product evolves it embraces
the latest technology and focuses on perfecting the details until
I’m absolutely happy the end result is the best it can be.
I hope that by creating new and inspiring audio experiences, you’ll
enjoy listening to your favourite tunes even more.

ENGLISH

Congratulations! Thank you for choosing Xenon Bluetooth Active Noise
Cancelling Headphones. Before using them, you should read this manual
to familiarise yourself with the functions of the product.
Geting Started

ENGLISH

Precautions
1. Before using Xenon headphones, we would strongly encourage you
to read through this user manual. Please follow the instructions given in
this manual carefully to ensure your safety.
2. Pay particular atention to any edges, uneven surfaces, metal parts,
accessories and packaging to avoid any possibility of injury.
3. Do not dismantle, repair or modify this product as this could lead to
fire, electric shocks or other product damage, which are not covered
underwarranty.
4. Do not use any solvents or volatile liquids to clean Xenon headphones.
5. Do not use your Xenon headphones in hazardous situations.

ENGLISH

Precautions
This device complies with Part 15 of the FCC regulations. Operation is
subject to the following two conditions: (1) this device will not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications or change to this equipment. Such modifica-
tions or change could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, according to part 15 of the FCC Regulations. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used following
the instructions, may cause harmful interference to radio communications.

ENGLISH

Precautions
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment of and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit diferent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ENGLISH

The device can be used in portable exposure conditions without
restriction. The device has been evaluated and meets general RF
exposure requirements.
This equipment complies with FCC’s RF radiation exposure limits established
for an uncontrolled environment. This device and its antenna(e)
must not be co-located or linked with another antenna or transmiter.
Precautions

ENGLISH

1. Bluetooth 5.0
2. Hybrid Active Noise-Cancelling
2. 3.5mm music line-in function
3. Supports connection with 2 phones or devices
4. The headphone batery power status is displayed on iOS
5. Qualcomm® aptX™, Qualcomm® aptX™ - Low latency,
SBCand AAC® audio technology
6. USB-C Charging
7. Microphone
Features


1. ANC LED
2. ANC Buton
3. Volume up/next track
4. Multi function Buton
5. Volume down/previous
6. LED Indicator
7. Type-C slot
8. 3,5 mm Audio Jack
9. Mic
10. Logo-LED
1
78 9
2
3
4
5
6

ENGLISH

Operation Status LED
Power on: Blue LED flashes 2 times
Power of: Red LED flashes 2 times
Pairing: Red LED & Blue LED flash alternately
Standby: Blue LED flashes 3 times in 5 seconds
Incoming call: Blue LED flashes continuously
Low batery: Red LED flashes 2 times every 2 seconds
Charging: Red LED stays lit
Charging complete: Blue LED stays lit
ANC mode on: White LED stays lit

ENGLISH

Basic Butons Operation
Power on: Press the POWER ON/OFF
buton for 1 second. The blue LED will
indicate that the headphones are turned
on.
Power of: Press the POWER ON/OFF
buton for 3 seconds. The red LED will flash
twice to indicate that the headphones are
turned of.
Adjust volume: short press volume buton
“+” to increase volume. Short press volume
buton“-” to decrease volume. When the
volume reaches max or min, listen for a
“beep” sound.
Play/Pause: Short press multifunction
buton to pause music. Press again to
restart.
Previous: Press the “-” buton for 1s to go
to the previous track
Next: Press the “+” buton for 1s to go to
the next track
Answer Calls: Short press the
multifunction buton to answer incoming
calls.
End call: Short press multifunction buton
to end the call.
Reject call: Press the “-” buton for 1s to
reject calls.
ANC mode: Use the slide buton to turn the
noise-cancelling function on and of. The
white LED will indicate that it is activated.
X LED: press the “+” and “-“ butons
simultaneously

ENGLISH

Batery Capacity status: When connected to iOS devices, the
headphone’s batery power status is displayed in the upper right corner
of device’s screen.
Charging: New headphones have enough power to listen to music for
several hours. When the batery runs low, recharge it for 2 hours with the
included USB-C cable. During charging, the red LED will blink. A blue LED will
indicate that the headphones are fully charged.
Reset Mode: Connect the headphones to a computer via the included
USB-C cable. When red LED lights up, the reset is complete.
Basic Operation

ENGLISH

3.5mm music line-in function
Connect the 3.5mm audio jack cable to the headphones for wired music.
You can also use it during calls, thanks to the built-in microphone on the
cable.
Before connecting the cable, please ensure that the headphones are
powered OFF.
1. Connect the 3.5mm audio cable to the headphones and device.
2. Adjust the volume on the device


1. Connect the 3.5mm audio cable to the headphones and device.
2. Press the buton once to pause/play music.
3. Press 2 times to skip a track
4. Press 3 times to go to the previous track.
5. Control the volume directly on your device.
3.5mm audio cable

ENGLISH

1. Make sure the headphones are powered OFF.
2. Press and hold the multifunction buton for 5
seconds to enter pairing mode.
3. The red & blue LEDs will blink alternately and a sound will
alert you that the headphones are in pairing mode.
4. Activate the Bluetooth function on your phone or device
and select Kygo Xenon.
5. The Headphones can now be used to play your phone
music or phone calls.
Bluetooth pairing

ENGLISH

Pairing with two phones or other devices simultaneously
1. Pair with phone “A” successfully and turn of the headphones.
2. Follow the same procedure with phone “B”.
3. Power up headphones again. They will automatically connect
to phone “B” (the last one connected). Go to Bluetooth
configurations on phone “A” and select Kygo Xenon to connect.

ENGLISH

Connect headphones to a computer using the USB-C cable.Press the “+”
and “-” butons at the same time until the BLUE and RED LED start blinking.
This, indicates the pairing records are cleared.
Clearing pairing records

ENGLISH

Sound quality with AAC®
Sound quality with Qualcomm® aptX™ and Qualcomm® aptX™ Low Latency
Thanks to Qualcomm® aptX™ codec, the headphones can connect
wirelessly to any aptX enabled devices. Doing so vastly improves the quality
of Bluetooth streaming and delivers CD-quality sound.
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd.
Sound quality with Qualcomm® aptX™ and AAC®

ENGLISH

1 x pair XENON Bluetooth Active Noise Cancelling Headphones
1 x USB-C charging cable
1 x user manual
1 × 3.5mm audio cable
1 x Carrying case
Kit Contents

ENGLISH

1. Always use an approved charger from a reputable
manufacturer to charge your headphones.
2. Always recharge your headphones if they have not
been used for more than twelve months.
Caution