Kygo Life Xelerate User manual

Xelerate user guide
Wireless Sports Earphones

XELERATE ENGLISH
Congratulations! Thank you for choosing Kygo Xelerate™
Bluetooth Earphones. Before using them, you should read
this manual to familiarise yourself with the functions of the
product.
Kygo Life As adheres to the certifiation requirements for
various regions around the world. For a full list of
certifiations please visit: w.xbykygo.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turn-
ing the equipment of and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and re-
ceiver. Connect the equipment into an outlet on a circuit
diferent from that to which the receiver is connected.
Changes or modifiations not expressly approved by
Kygo Life As could void the user’s authority to operate
this equipment.
Kygo Life As, Gjerdrumsvei 10 A, declare under their sole
responsibility that the product described in this user
guide complies with technical standards EN,
EN, EN, EN, EN.
The product is only guaranteed to comply with
EN in generic mode with immersion of with the
volume limiter on. Depending on the hearing of the user,
some combinations of hearing corrections and immer-
sion seting may exceed EN limits.
To prevent possible hearing damage, do not listen at
high levels for long periods.
This device may be operated in all member states of the
EU. Declaration for EU compliance: Operation Frequen-
cy Band/Max. RF power transmited: 2402-24MHz,
<3.24dBm.
1. Please follow the instructions given in this manual
carefully to ensure your safety. Before using Kygo
Xelerate™ earphones, we would strongly encourage
you to read through this user manual.
2. Pay particular atention to any edges, uneven sur
faces, metal parts, accessories and packaging to
avoid any possibility of injury.
3. Do not dismantle, repair or modify this produc as
this could lead to fire, electric shocks or other
product damage, which are not covered under
warranty.
4. Do not use any solvents or volatile liquids to clean
Kygo Xelerate™ earphones.
5. Do not use your Kygo Xelerate™ earphones in
hazardous situations.
Geting Started Precautions Precautions
Precautions

XELERATE ENGLISH
Hereby, Kygo Life As. declares that the radio equipment
type ‘Xelerate’ is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of conformity is
available at the following internet address:
.xbykygo.com
Focus on your safety and that of others if you use the
headphones while engaging in any activity requiring
your atention. You may remove the headphones or
adjust your volume to ensure you can hear surrounding
sounds, including alarms and warning signals.
Do not use the headphones if they emit any loud or
unusual noise. If this happens, take the headphones of
and contact Kygo Life As customer service.
Do not submerge or expose the headphones to water,
or wear while participating in watersports, e.g.,
swimming, surfing etc.
This symbol means the product must not be discarded
as household waste, and should be delivered to an ap-
propriate collection facility for recycling. Proper dispos-
al and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your lo-
cal municipality, disposal service, or the shop where you
bought this product.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Kygo Life As. is under license.
Made and assembled in China.
© 2019 Kygo Life As. No part of this work may be repro-
duced, modified distributed or otherwise used without
prior writen permission.
Precautions Precautions
The device has been evaluated and meets general RF
exposure requirements.
This equipment complies with FCC’s RF radiation expo-
sure limits established for an uncontrolled environment.
This device and its antenna(e) must not be
co-located or linked with another antenna or transmiter.
1. Bluetooth 5.0
2. The headphone batery power status is
displayed on iOS
3. SBC and Qualcomm® aptX™ audio technology
Precautions
Features

XELERATE ENGLISH
Power on: Press multi-functional buton for 3 seconds.
When blue LED is on, headphones are turned on.
Power of: Press multi-functional buton for 3 seconds.
Adjust volume: short press volume buton “+” to in-
crease volume. Short press volume buton “-” to de-
crease volume. When volume reaches max or min, listen
for a “beep” sound.
Play/Pause: Short press multifunctional buton to pause
music. Press again to restart.
Next: Long press “+“ buton to go to previous next
track.
Previous: Long press “-“ buton to go to previous track
Answer Call: Short press multifunctional buton to an-
swer incoming calls.
End call: Double press the multifunctional buton to
end calls.
Reject call: Long press multifunctional buton to
reject calls.
Batery Capacity status: When connected to iOS
devices, the headphone’s batery power status is
displayed in upper right corner of device’s screen.
Charging: A new set of earphones has enough power
for pairing and dialling out several times. When it has
low batery, please charge via USB cable for 2 hours.
During charging, red LED flashes. Once fully charged,
blue LED remains on.
General function Basic Buton Operations
Power on: Blue LED is turned on for 1 sec.
Power of: Red LED is turned on for 1 sec.
Pairing: Red/LED & Blue LED flash alternately
Incoming call: Red LED flashes continuously
Low batery: Red LED flashes 2 times every 2 sec.
Charging: Red LED stays lit
Charging finished: Red LED stays lit during charging.
Blue LED stays lit once charging is done.

XELERATE ENGLISH
Reset mode
Waterproof
When earphone is of but charging, Long Press 5s
Power & VOL+, Red light of.
The Kygo Xelerate™ are water resistant under classification
IPX. The earphones can tolerate from splashing water
from any direction, rain and sweat.
Do not submerge them in water.
Clearing pairing Kit content
Bluetooth pairing with one phone
or other devices:
When earphone is Disconnected and powered on,
Long Press 5s VOL+ & VOL-, Red and Blue light blinking
at the same time for twice (showing in purple light)
then earphone is of
1 x pair Kygo Xelerate™ Bluetooth Earphones
1 x charging USB-micro cable
2 x extra sizes of patented Freebit Sport Wings
2 x extra sizes of silicon ear tips
1x warranty card
1x warning sheet
1. Make sure the headphones are powered OFF.
2. Press and hold the multifunction buton for 5 sec
to enter into pairing mode.
3. Ater red & blue LEDs flash alternately, there will be
a sound to alert you that they have entered into
pairing mode.
4. Activate the Bluetooth function on your phone or
device and search for the headphones. Follow the
instruction to enter “0000” as PIN if the mobile
phone reminder appears.
5. Headphones or device can now be used to play
your phone music or for phone calls.
Sound quality with
Qualcomm® aptX™ and AAC® Specifications
Sound quality with AAC®
Sound quality with Qualcomm® aptXTM and
Qualcomm® aptXTM Low Latency
Thanks to Qualcomm® aptX™ codec, the headphones
can connect wirelessly to any aptX enabled devices.
Doing so vastly improves the quality of Bluetooth
streaming and delivers CD-Quality sound.
Bluetooth version: 5,0
Water resistance: IPX 
Talk time: Approx. 10 hours
Playing time: Up to 8 hours
Wireless range: 10 m
Bluetooth profiles: ADP/ AVRCP/ HSP /HFP
Audio codec: AptX, SBC, MP
Impedance: 16ohm
Sound pressure level: 95+/-3dB
Frequency response (±3dB): 20~20khz
Weight: 12.9g
Dimensions: 86mm*160mm*28mm
Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Warranty
European warranty period 2 years

Gjerdrumsvei 10 A
0484 Oslo // Norway