Lafayette Instrument 58024E User manual

Model 58024E Instruction Manual
www.lafayetteinstrument.com . [e-mail]
© 2016 by Lafayette Instrument Company, Inc. All Rights Reserved. Rel. 4.25.16
Model 58024E
Automatic Mirror Tracer
Instruction Manual
3700 Sagamore Pkwy N
Lafayette, IN 47904 USA
Tel: [phone] • [phone]
Fax: [phone]
[email protected]
www.lafayetteinstrument.com
MAN58024E

Lafayette Instrument Automatic Mirror Tracer
3700 Sagamore Pkwy N Lafayette, IN 47904 . Tel: [phone]
Apparatus
• Lafayette Mirror Tracer, Model 31010
• Mirror Tracing Stars, Model 31110
• Economy Clock/Counter, Model 54060A
Description
The Automatic Mirror Tracer (Model 58024E) consists
of an aluminum plate with a non-conducting black star
pattern anodized into the surface. When this plate and
the metallic-tracing stylus are both connected to the
Economy Clock/Counter (Model 54060A), the subject’s
errors are automatically tallied as well as the total
amount of time that the subject’s stylus is outside the
star pattern.
Specications
• Voltage: AA Battery (1.5V Rechargeable NiMH AA
Included)
Set Up Instructions
1. Connect the Black stripped and tinned wire on the
aluminum plate to one of the Ground inputs* (labeled
GND) on the 54060A.
2. Connect the stylus to the run input on the 54060A.
3. The clock/counter may be reset to zero with the reset
button located under the display window.
* Note: Depress white push button with a screwdriver as
shown at right to insert or release wires.
2
1
2

Model 58024E Instruction Manual
www.lafayetteinstrument.com . [email protected] 3
Buttons
Menu Button: Pressing the Menu button while no test is running will cycle through the
following options. Press either the Reset button or Pause button to select the rst or second
option respectively. Each time the device is powered on, the bolded option is set by default.
• RUN: NO NC
• START: NO NC
• STOP: NO NC
• RESET: NO NC
• TONE: OFF ON
• START: SNGL REP
Reset Button: Pressing the Reset button is identical to activating the Reset input. The Reset
input is invalid if the timer is running or if the device is paused.
Pause Button: Pressing the Pause button toggles the Pause state. During the Pause state,
no inputs can be activated and the only button that works is the Pause button to toggle out
of the Pause state.
Inputs
Run: If the Run input is the initial input received, the unit will start timing for the duration of
the input. Each activation of the input will add to the count and continue the clock. The Start
and Stop inputs will be ignored until a Reset command is received.
Start: If a Start input is the initial input received, the unit will start timing until a Stop input is
received. During the timing or after it has stopped, the Run input will add an additional count.
Stop: The Stop input is used to stop the timer if Start was used as the initial input.
NO (Normally Open): The input is activated when it is connected to ground.
NC (Normally Closed): The input is activated when it is disconnected from ground.
TONE: If ON, whenever the Run input is activated, a tone will sound for the duration of the
activation.
Start Options
SNGL: If Start is set to Single Mode (SNGL), then the Start and Stop inputs may only be used
once before the Reset command is received.
REP: If Start is set to Repeat Mode (REP), then the Start and Stop inputs may be used multiple
times before the Reset command is received. Each subsequent Start will continue the timer
where it left off.

Lafayette Instrument Automatic Mirror Tracer
3700 Sagamore Pkwy N Lafayette, IN 47904 . Tel: [phone]
Terms and Conditions
LIC Worldwide Headquarters
Toll-Free: [phone] (USA only)
Phone: [phone]
Fax: [phone]
[email protected]
[email protected] (Outside the USA)
Mailing Address:
Lafayette Instrument Company
PO Box 5729
Lafayette, IN 47903, USA
Lafayette Instrument Europe
Phone: [phone]
Fax: [phone]
Email: [email protected]
Phone, Fax, Email or Mail-in Orders
All orders need to be accompanied by a hard copy of your purchase order. All
orders must include the following information:
• Quantity
• Part Number
• Description
• Your purchase order number or method of pre-payment
• Your tax status (include tax-exempt numbers)
• Shipping address for this order
• Billing address for the invoice we’ll mail when this order is shipped
• Signature and typed name of person authorized to order these products
• Your telephone number
• Your email address
• Your FAX number
Domestic Terms
There is a $50 minimum order. Open accounts can be extended to most
recognized businesses. Net amount due 30 days from the date of shipment
unless otherwise specied by us. Enclose payment with the order; charge with
VISA, MasterCard, American Express, or pay COD. We must have a hard copy
of your purchase order by mail, E-mail or fax. Students, individuals and private
companies may call for a credit application.
International Payment Information
There is a $50 minimum order. Payment must be made in advance by: draft
drawn on a major US bank; wire transfers to our account; charge with VISA,
MasterCard, American Express, or confirmed irrevocable letter of credit.
Proforma invoices will be provided upon request.
Exports
If ordering instrumentation for use outside the USA, please specify the country
of ultimate destination, as well as the power requirements (110V/60Hz or
220V/50Hz). Some model numbers for 220V/50Hz will have a “*C” sufx.
Quotations
Quotations are supplied upon request. Written quotations will include the price
of goods, cost of shipping and handling, if requested, and estimated delivery
time frame. Quotations are good for 30 days, unless otherwise noted. Following
that time, prices are subject to change and will be re-quoted at your request.
Cancellations
Orders for custom products, custom assemblies or instruments built to
customer specications will be subject to a cancellation penalty of 100%.
Payment for up to 100% of the invoice value of custom products may be required
in advance. Cancellation for a standard Lafayette Instrument manufactured
product once the product has been shipped will normally be assessed a charge
of 25% of the invoice value, plus shipping charges. Resell items, like custom
products, will be subject to a cancellation penalty of 100%.
Exchanges and Refunds
Please see the cancellation penalty as described above. No item may be returned
without prior authorization of Lafayette Instrument Company and a Return
Goods Authorization (RGA#) number which must be afxed to the shipping
label of the returned goods. The merchandise should be packed well, insured
for the full value and returned along with a cover letter explaining the reason for
return. Unopened merchandise may be returned prepaid within thirty (30) days
after receipt of the item and in the original shipping carton. Collect shipments
will not be accepted. Product must be returned in saleable condition, and credit
is subject to inspection of the merchandise.
Repairs
Instrumentation may not be returned without rst receiving a Return Goods
Authorization Number (RGA). When returning instrumentation for service, please
call Lafayette Instrument to receive a RGA number. Your RGA number will be
good for 30 days. Address the shipment to:
Lafayette Instrument Company
3700 Sagamore Parkway North
Lafayette, IN 47904, USA.
Shipments cannot be received at the PO Box. The items should be packed
well, insured for full value, and returned along with a cover letter explaining
the malfunction. An estimate of repair will be given prior to completion ONLY
if requested in your enclosed cover letter. We must have a hard copy of your
purchase order by mail or fax, or repair work cannot commence for non-
warranty repairs.
Damaged Goods
Damaged instrumentation should not be returned to Lafayette Instrument prior to
a thorough inspection. If a shipment arrives damaged, note damage on delivery
bill and have the driver sign it to acknowledge the damage. Contact the delivery
service, and they will le an insurance claim. If damage is not detected at the
time of delivery, contact the carrier/shipper and request an inspection within
10 days of the original delivery. Please call the Lafayette Instrument Customer
Service Department for repair or replacement of the damaged merchandise.
Limited Warranty
Lafayette Instrument Company warrants equipment manufactured by the
company to be free of defects in material and workmanship for a period of one
year from the date of shipment, except as provided hereinafter. The original
manufacturer’s warranty will be honored by Lafayette Instrument for items not
manufactured by Lafayette Instrument Company, i.e. resell items. This assumes
normal usage under commonly accepted operating parameters and excludes
consumable products.
Warranty period for repairs or used instrumentation purchased from Lafayette
Instrument is 90 days. Lafayette Instrument Company agrees either to
repair or replace, at its sole option and free of part charges to the customer,
instrumentation which, under proper and normal conditions of use, proves to
be defective within the warranty period. Warranty for any parts of such repaired
or replaced instrumentation shall be covered under the same limited warranty
and shall have a warranty period of 90 days from the date of shipment or the
remainder of the original warranty period whichever is greater. This warranty
and remedy are given expressly and in lieu of all other warranties, expressed or
implied, of merchantability or tness for a particular purpose and constitutes
the only warranty made by Lafayette Instrument Company.
Lafayette Instrument Company neither assumes nor authorizes any person to
assume for it any other liability in connection with the sale, installation, service or
use of its instrumentation. Lafayette Instrument Company shall have no liability
whatsoever for special, consequential, or punitive damages of any kindfrom any
cause arising out of the sale, installation, service or use of its instrumentation.
All products manufactured by Lafayette Instrument Company are tested and
inspected prior to shipment. Upon prompt notication by the Customer, Lafayette
Instrument Company will correct any defect in warranted equipment of its
manufacture either, at its option, by return of the item to the factory, or shipment
of a repaired or replacement part. Lafayette Instrument Company will not be
obliged, however, to replace or repair any piece of equipment, which has been
abused, improperly installed, altered, damaged, or repaired by others. Defects in
equipment do not include decomposition, wear, or damage by chemical action
or corrosion, or damage incurred during shipment.
Limited Obligations Covered by this Warranty
1. In the case of instruments not of Lafayette Instrument Company
manufacture, the original manufacturer’s warranty applies.
2. Shipping charges under warranty are covered only in one direction. The
customer is responsible for shipping charges to the factory if return of
the part is required.
3. This warranty does not cover damage to components due to improper
installation by the customer.
4. Consumable and or expendable items, including but not limited to
electrodes, lights, batteries, fuses, O-rings, gaskets, and tubing, are
excluded from warranty.
5. Failure by the customer to perform normal and reasonable maintenance
on instruments will void warranty claims.
6. If the original invoice for the instrument is issued to a company that
is not the company of the end user, and not an authorized Lafayette
Instrument Company distributor, then all requests for warranty must be
processed through the company that sold the product to the end user,
and not directly to Lafayette Instrument Company.
Export License
The U.S. Department of Commerce requires an export license for any polygraph
system shipment with an ULTIMATE destination other than: Australia, Japan,
New Zealand or any NATO Member Countries. It is against U.S. law to ship a
Polygraph system to any other country without an export license. If the ultimate
destination is not one of the above listed countries, contact us for the required
license application forms.