Laser LSH-LEDART6 User manual
Panel Connection Hole
Connect PCB Board
Fixing Parts
Infrared Receiver
Indicator Light
Static Mode-Brightness Adjustment
Dynamic Mode-Speed Adjustment Mode Switch
ON/OFF Switch
PRODUCT DIAGRAM:
REGISTER OR
LOGIN TO APP
PAIRING TO THE APP:
QR Codes for
Downloading Apps
TAP HERE
REGISTER
no account
LOGIN
existing account
GET THE APP
On the controller, press and hold the
ON/OFF button for 5 seconds to put
light into pairing mode.
TIP:
You will need to have at least 1 light
panel connected to the controller to
see the flashing light
Tap Here
1
2
3
USING THE APP:
Settings
Brightness
Power Pre-set
Scenes
Music
Mode
Use Master
Controller Mic
Use
Smartphone Mic
Start Music Mode-
Lights change based on sounds
Use preset lighting scenes
or create your own
Unpair light from
connected
Smartphone
INSTALLATION INSTRUCTIONS:
1. Take a PCB Board and a Wall Panel.
2. Connect the PCB Board into any of the 3 slots on the Wall Panel.
3. Take another Wall Panel and connect to the other end of the PCB Board on
the first panel.
4. Add more Wall Panels to form a desired shape.
5. Use a Fixing Part to strengthen the connections between the Wall Panels as
required. Note: The more fixing parts used the more secure your shape will be.
6. Attach the Wall Panels to the Master Controller.
7. Turn over your Wall Panel Shape and affix included stickers. Note: Spread out the
stickers to cover as many panels and edges as possible for more even weight
distribution.
8. Please wipe down the wall and make sure it is free from any dirt before sticking
the Wall Panels. This will ensure a stronger bond.
USING THE IR REMOTE:
MUSIC MODE
ON/OFF SWITCH
BRIGHTNES
ADJUSTMENT
STATIC COLOR
MODE
TIMER MODE
W
P i n k
W
Natural
W
C o l d
Timing
Music
FeaturesOperation ButtonsPhenomenon
Short pressON/OFF ON/OFF
Increase or decrease brightness
Increase or decrease brightness quickly
Display the corresponding color light
Pink/natural white/blue and white
Set timer for the chosen value
(in minutes)
Music mode 1, 2, 3, 4, 5
Adjustment
Static color
White light
Short press
Short press
Short press
Short press
Short press
Long press
W
P i n k
W
Natural
W
C o ld
DESIGN IDEAS:
*Note: Additional panels required for some designs
TROUBLESHOOTING
Q. Why is the Wall Panel not pairing?
A. If your Wall Panel has trouble pairing, check your Wi-Fi
username and password are correct. Ensure that you are
using 2.4Ghz Wi-Fi connections only as the 5Ghz bands
are not supported.
Q. Can I change the light panel colours individually?
A. No, when the panels have been connected together they
are all controlled as a whole via the APP.
Q. I can’t see any flashing light when pairing the Master
Controller.
You will need to connect at least 1 Wall Panel to the master
controller to see if the device is in pairing mode. If the wall
panel is blinking quickly then it is in pairing mode.
WARRANTY AGAINST DEFECTS
Laser warrants your new product to be free from defects in materials and workmanship for 12 months, from the
date of purchase, provided that the product is used in accordance with accompanying recommendations or
addition to your rights under the Australian
Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or
services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a refund, repair, or
exchange (where possible) for this product if it becomes defective within the warranty period. This warranty
will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear,
neglect, or improper storage. Please retain your receipt as proof of purchase
How to make a product warranty claim:
1. Find your receipt with date of purchase. If this is not available, Laser will make an assessment
based on the date of manufacture, condition of the product and type of defect.
2. Please contact your original place of purchase. They will assess the nature of the fault and
refund or replace the product as per their store refund or warranty policy.
3. If your original place of purchase cannot be contacted, please contact Laser with a description
of the fault. To assist our team in providing you with a quick resolution, please include any
photos and/or a short video demonstrating the fault with your product.
• Phone: (02) 9870 3355
• Online: www.laserco.net/support/warranty and follow the website instructions
• SW, Australia
pt to troubleshoot and resolve the
issue for you without the need to return the product.
5. If it is determined via troubleshooting that your product may be faulty, our team will provide
instructions to have the product returned for assessment. If the product does need to be
returned within the warranty period, Laser will arrange return shipping at no cost to you.
6. Once we receive the product, our experienced technicians will assess it and determine how
best to resolve the issue.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
For more
helpful guides
visit us at
LASER
www.youtube.com/LasercoAu
www.laserco.com.au
Table of contents
