LaserDisc CLD-99 User manual

CD CDV lD PLAYER
CLD-99
-nank you for buying this Pioneer product.
"iease read through these operating instructions so you will know
- 8W t8 operate your model properly. After you have finished
'eading the instructions, put them away in a safe place for future
'eference.
n some countries or regions, the shape of the power plug and
Jower outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The serial number for this equipment is located on the rear panel.
"lease write this serial number on your enclosed warranty card
3"d keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS ELECTRIQUES
"" PAS UTiUSER CETTE FICHE POLARISEE AVEC UN PROLONGA-
-"~P,, UN" PRISE DE COURANT OU UNE AUTRE SORTIE DE
::;::;_PANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND
S':'',S "N LAiSSER AUCUNE PARTIE A DECOUVERT.
C.AUT/ON:
-- e : -: c_:: satisfies FCC regulations when shielded cables
"-c ::--e::crs are used to connect the unitto other equip-
-eo' -c c'event electromagnetic interference with electric
ar;ciia-:es euch as radios and televisions, use shielded
caciee a,c: :cnnectors for connections.
ELITE
ACCESSORIES , 4
PRECAUTIONS 5
FEATURES AND FUNCTIONS OF THE PLAYER 6
TYPES OF DISCS THAT CAN BE PLAYED WITH THIS UNIT , 7
CARE OF DISCS 8
CONNECTIONS 9
BASIC CONNECTIONS 9
CONNECTING TO THE DIGITAL JACKS 10
SYSTEM REMOTE CONTROL CONNECTION 11
NAMES AND FUNCTIONS OF CONTROLS 12
PICTURE QUALITY ADJUSTMENT (V-DNR 3D) 18
TO SEARCH FOR A PARTICULAR TIME/FRAME -
Time Number Search/Track Time Search/ABS Time Search/
Frame Number Search 21
TO PLAY ALL CHAPTERS/TRACKS IN RANDOM ORDER-
Random Playback , , 22
TO SEARCH FOR A PARTICULAR CHAPTER/TRACK -
Hi-Lite Scan/lntro Scan 22
TO REPEATEDLY PLAY A DESIRED PASSAGE-
Repeat Playback , 23
TO PLAY ONLY DESIRED SCENES/TRACKS-
Program Playback , , 24
DISPLAY SWITCHING 25
TROUBLESHOOTING 26
SPECIFICATIONS 29
(V) PIONEER®
The Art of Entertainment

IMPORTANT
A
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user to the
presenoe of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shack to persons.
~
•• • •
I' ••.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of imlX'rtant
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SAFETY INSTRUCTIONS
READ INSTRUCTIONS - All the safety and operating
instructions should be read before the appliance is
operated.
RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained for future reference.
HEED WARNINGS - All warnings on the appliance
and in the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.
CLEANING - Unplug this video prOduct frorn the wall
outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
ATTACHMENTS Do not use attachrnents not
recommended by the video product manufacturer as
they may cause hazards.
WATER AND MOISTURE - Do not use this video
product near water - for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc.
ACCESSORIES - Do not place this video product on an
unstable cart, stand. tripod, bracket, or table. The
video product may fall. causing serious injury to a
child or adult, and serious damage to the appliance.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video product. Any mounting of the appliance should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
CART - An appliance and cart combination should be
moved with care. Quick stops, excessive force. and
uneven surfaces may cause the appliance and cart
combination to overturn.
VENTILATION - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video product and to protect it from
overheating. These openings must not be blocked or
covered. They should never be blocked by placing
the video product on a bed, sofa, rug, or other similar
surface. This video product should never be placed
near or over a radiator or heat register. This video
product should not be placed In a built-in installation
such as a bookcase or rack unless proper ventilation
is provided or the manufacturer's instructions have
been adhered to.
POWER SOURCES - This video product should be
operated only from the type of power source
indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your
appliance dealer or local power company. For video
products intended to operate from battery power, or
other sources, refer to the operating instructions.
POWER-CORD PROTECTION
Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention
to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
2
<VRBl139>
En
POLARIZATION - This video product IS equipped With
a polarized alternating current line plug (a plug haVing
one blade wider than the other). ThiS plug will fit into
the power outlet only one way. ThiS is a safety
feature. If you are unable to insert the plug fully Into
the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the polarIZed plug.
LIGHTNING - For added protection for thiS video
product receiver during a lightning storm, or when it
is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect
the antenna or cable system. ThiS will prevent
damage to the video product due to lightning and
power-line surges.
POWER LINES - An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it
can fall into such power lines or circuits. When
installing an outside antenna system. extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING - Do not overload wall outlets and
extension cords as this can result in the risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY - Never push objects of
any kind into this video product through openings as
they may touch dangerous voltage POints or short-
out parts that could result in a fire or electric shock
Never spill liquid of any kind on the video product.
SERVICING - Do not attempt to serVice this video
product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards,
Refer all servicing to qualified service personnel
ELECTRIC
SERVICE
EOUIPMENT
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to -qualified service personnel under
the following conditions'
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into
the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions. Improper adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
the video product to ItS normal operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct change
In performance - this indicates a need for service.
REPLACEMENT PARTS - When replacernent parts are
required. be sure the service technician has used
replacement parts specified by the manufacturer or
having the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
SAFETY CHECK - Upon completion of any service or
repairs to thiS video product, ask the service
technician to perform safety checks to determine
that the video product is In proper operating
condition
OUTDOOR ANTENNA GROUNDING - If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to
provide some protection against voltage surges and
built-up static charges.
In the U.S.A. section 810 of the National Electrical
Code. ANSI/NFPA 70. provides information with
respect to proper grounding of the mast and
supporting structure. grounding of the lead-In wire to
an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit
connection to grounding electrodes. and
requirements for the grounding electrode.
See Fig A
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810 - 201
.- POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART HI

This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiolTV technician for help.
Information to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
CAUTION
• Use of control or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure .
• The use of optical instruments with this product will increase eye hazard.
[For Canadian model]
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
[Pour Ie modele Canadien]
Cet appareil numerique de la Classe B respecte toutes les exigences du Reglement sur Ie materiel brouilleur du Canada.
Selecting fine audio equipment such as the unit you've just purchased is only
the start of your musical enjoyment. Now it's time to consider how you can
maximize the fun and excitement your equipment offers. This manufacturer and
the Electronic Industries Association's Consumer Electronics Group want you
to get the most out of your equipment by playing it at a safe level. One that lets
the sound come through loud and clear without annoying blaring or distortion-
and, most importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing comfort level adapts to
higher volumes of sound. So what sounds normal can actually be loud and
harmful to your hearing. Guard agaiust this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss
in the future. After all, we want you listening for a lifetime.
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until it
is too late, this manufacturer and the Electronic Industries Association's
Consumer Electronics Gronp recommend you avoid prolonged exposure to
excessive noise. This list of sound levels is included for your protection.
Decibel
Level Example
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER
CONSTANT EXPOSURE
90 Subway, motorcycle, truck traffic, lawn mower
100 Garbage truck, chain saw, pneumatic drill
120 Rock band concert in front of speakers, thunderclap
140 Gunshot blast, jet plane
180 Rocket launching pad
3
<VRB1139>
En

I ACCESSORIES
• Remote control unit
.Size "AAA" (IEC R03)
dry cell battery x 2
.Video cord
(Pin plug ++ Pin plug)
Use to connect the player
to a color monitor, etc.
INSERTING BATTERIES INTO THE REMOTE
CONTROL UNIT
[I] Open the battery compartment cover on the back ofthe remote
control unit. Press the knob and open the cover in the direction
ofthe arrow.
[2] Take out the two accessory size "AAA" (IEC R03) dry cell
batteries, and insert them into the battery compartment in
accordance with the display (EEl, 8l inside the compartment.
[I] Close the cover of the battery case.
Incorrect use of batteries may lead to leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment,
correctly matching the positive EEl and negative 8 polarities,
as indicated inside the compartment.
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on their type. Do not mix different types of
batteries.
I Range of remote control operation
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control unit receiver on the front
panel of the player. The remote control unit can be used within a
range of about 7 meters (23 feet) from the remote sensor, and
within angles of up to about 30 degrees.
4
<VRB1139>
En
.S-VIDEO cable
(Mini DIN ++ Mini DIN) .Audio cord
(Pin plug x 2 ++ Pin plug x 2)
Use to connect the player to
a stereo amplifier, etc .
• Operating instructions
.Warranty card
NOTES FOR USING THE REMOTE CONTROL UNIT
• If a plug is connected to the CONTROL IN terminal at the rear of the
player, remote control operations cannot be done with the remote
control unit aimed at the players remote control sensor. Aim the
remote control unit at the AV amplifier or the component display s
sensor instead.
• If there is any obstacle between the remote control unit and the
player, or if the unit is held at too large an angle relative to the front
panel of the player, the signal from the remote control unit will fail to
reach the remote sensor.
• If the player is operating in the vicinity of other appliances generating
infrared rays, or if other remote control devices using infrared rays
are used near the player, the player may operate improperly. Con-
versely, if the players remote control unit is operated in the vicinity
of other appliances which use an infrared remote control device, the
other appliance may operate improperly. If this should happen,
change the place of installation so that improper operation does not
occur.
• If the range of operation of the remote control unit becomes too short,
replace the batteries.
• When the unit is not to be used for a long period of time (more than
one month), remove the batteries to prevent them from leaking inside
the compartment. If leakage occurs, wipe up the liquid inside the
compartment and replace the batteries with newones.
• Do not place books or other objects on the remote control unit, since
they might depress the buttons and run down the batteries .
• If the remote control sensor window is in a position where it receives
strong light such as sunlight or fluorescent light, control may not be
possible.

I PRECAUTIONS
If it becomes necessary to transport or ship this unit in the
future, be sure to first remove the disc (if loaded), retract the disc
table to its closed position and turn the power off. After the
"OFF" display goes out on the display, disconnect the power
cord.
INSTALLING THE PLAYER
• Place the player on a stable platform next to the television and
stereo system to be used with the player.
.When using the player with a stereo system, your speakers
should be placed away from your television (or TV monitor).
• Do not place heavy objects such as a television or TV monitor on
top of the player.
• Do not place the player on top of your TV set or TV monitor. Also,
keep the player away from devices such as cassette decks which
are sensitive to magnetic fields.
When FM or AM stations are being received, signal noise may be
generated if the player is turned on. Turn off the player when not
in use. Also, ifthere is a signal noise when receiving radio stations
with an indoor antenna, adjust the position or direction of the
antenna.
INSTALL THE PLAYER IN A WELL VENTILATED PLACE
AWAY FROM HEAT AND HUMIDITY
Do not install the player in a location subject to direct sunlight, or
near a stove or radiator, etc. This could adversely affect the cabinet
and internal components. Also avoid installing the player in a
humid or dusty location. This could result in a malfunction or
accident. Do not install near a cookstove where the player could be
affected by smoke, steam, or heat.
AVOID SOURCES OF HEAT
Do not put the player on sources of heat, such as an amplifier.
When installing with audio components on a rack, avoid
components that generate heat, by placing the player below such
components where there is adequate ventilation and not much
dust.Avoid placing the player on surfaces such as shaggy carpets,
beds, and sofas which may block ventilation under the player and
cause damage.
CAUTIONS FOR AUTOMATIC LOADING
OPERATIONS
Since this player has an automatic loading construction, use the
button on the player or the remote control unit for opening and
closing of the disc table. To avoid damage, be careful not to
apply any force to the moving disc table.
Even when the player is in the pause mode, the disc-drive motor
is still revolving. Since leaving the player in this condition can
shorten the lifetime ofthe motor, do not leave the player in the
pause mode for a long period of time. Also, to prevent the
damage to the screen, do not use the unit for a long period of
time under conditions in which the screen display (monitor) has
been displayed characters (for example, power-ON mode, CD
PLAY, PAUSE).
CAUTION WHEN INSTALLING IN A RACK HAVING A
GLASS DOOR
Be careful to install so that when the disc table is opened by remote
control it does not hit the glass door. Strong force against movement
of the disc table may cause breakdown.
Take the following precautions to avoid accidents
Be careful not to catch your finger in the disc table section while
the disc table is being retracted into the unit. Also, be careful
that children do not put their hands inside the unit while the disc
table is open. This may cause injury.
STRIPE PATTERNS APPEARING ON A TV PROGRAM
Stripe patterns may appear during a TV program ifthe player unit
is turned on, depending on the quality of reception of the TV
station. This is neither a malfunction of the television nor the
player. If stripes appear while watching TV, or when watching TV
for a long period oftime, turn the player off.
~
~
CONDENSATION
Moisture will form in the operating section of the player if the
player is brought from cool surroundings into a warm room or if
the temperature of the room rises suddenly. When this happens,
player's performance will be impaired.
To prevent this, let the player stand in its new surroundings for
about an hour before switching it on, or make sure that the room
temperature rises gradually.
The same symptoms of condensation may be caused during
summer, if the player is exposed to the breeze from an air
conditioner. In such cases, change the location of the player.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet as this could cause a short circuit or electric shock. Do not
place the unit, a piece of furniture, etc., on the power cord, or pinch
the cord. Never make a knot in the cord or tie it with other cords.
The power cords should be routed such that they are not likely to
be stepped on. A damaged power cord can cause fire or give you
an electrical shock. Check the power cord once in a while. When
you find it damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
1 CLEANING CARE 1---------
Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth
in a solution of household detergent diluted using one part detergent
to five or six parts water; wring well first and wipe. Use a dry cloth
to wipe it dry. Do not use any volatile agents such as benzine or
paint thinner, as they may damage the surface of the player.
Abnormal functioning of this unit may be caused by static
electricity, or other external interference. To restore normal
operation, turn the power off and then on again, or unplug the
AC power cord and then plug it in again.
Only one disc can be loaded at anyone time. Loading a LaserVison
Disc, a Compact Disc, an 8-cm Compact Disc or a Compact Disc with
Video on top of one another may result in breakdown, or in scratch-
ing of the discs.
Please only load one disc at a time.
This player is to be used exclusively with the NTSC color system.
Please use NTSC LaserVision Disc or NTSC Compact Disc with Video
only. PAL and SECAM system discs cannot be used with this player.
5
<VRB1139 >
En

I FEATURES AND FUNCTIONS OF THE PLAYER
Gamma-Turn System - Two-Side Continuous Playback
With this function, both sides of a two-sided LD can be played
consecutively, eliminating the need to turn the disc over when the
first side is completed.
A Side ++ B Side Continuous Playback Programs
Through the use ofthe Gamma-Turn system, programs which go
from side A to side B or from side Bto side A can be freely created.
Full Digital Processing System
Virtual elimination of analog processing assures high picture
quality with minimal distortion. Thanks to the field correlation
digital video processor, the picture is dimensionally balanced with
high resolution and high SIN.
Digital TBC system
A digital TBC system is used for correcting jitter in the picture
processing circuitry, featuring a wide correction range, minimal
signal degradation and high-quality picture reproduction.
3D Digital V IC Separation Circuitry
This circuitry memorizes a scene, and immediately compares it
with the current scene to achieve VIC separation with less dot
interference and cross color interference than 3-line VIC separation
(2D), with no loss in horizontal, vertical, and diagonal resolution.
'-Bit DLC D/A Converters
D/A converters are devices for transforming digital signals into
analog signals. The D/A converter used in this player employs an
advanced 1-bit conversion system. Compared to conventional
converters, this system has the following advantages:
• Theoretically no zero cross distortion is generated .
• The system is free of non-linear distortion throughout the
frequency range.
• High-precision operation can be obtained without adjustments.
With this type of conversion, there is no loss of music quality even
at minute signal levels. Moreover, the noise shaping function
necessary for 1-bit conversion is implemented using a double-step
noise shaping system. This system carries out noise shaping once
in the preliminary digital filter stage and then again in the D/A
converter section, thus minimizing quantization noise and providing
extremely high-precision. Furthermore, two of these D/A converters
are used independently for the left and right channels, realizing a
high signal-to-noise ratio and excellent separation.
Legato Link Conversion
This unit is equipped with Legato Link Conversion which makes
possible reproduction that exceeds the conventional limits of the
digital recording format.
Legato Link Conversion achieves music reproduction closer to the
original sound by deducing the original signal based on the
recorded signal.
Digital output terminals
This unit is equipped with both optical output and coaxial digital
output terminals.
6
<VRB1139>
En
3D Digital NR
LDs contain inherent noise such as color smearing. To effectively
reduce this kind of noise, this unit features 3D Digital NR. Vou can
also independently adjust brightness and color. Naturally, since
processing is digital, there's no loss in picture quality.
Film Mode
When Film Mode is ON, the front panel display window and screen
display are turned off during playback, and the screen goes black
when changing disc sides. Play starting time and the time required
to change disc sides is shorter than during normal playback of
movie discs.
Program Playback
Up to 24 chapters can be programmed for playback in any desired
sequence.
Repeat Playback
Eight repeat modes - Memory Repeat, A-B Repeat, 1-chapter/track
Repeat, One-side Repeat, All side Repeat (for two-side LDs only),
Program Repeat, and Random Repeat - are available. (With discs
having no TOC, Random Repeat cannot be carried out.)
Special Play Functions
Thanks to the video circuitry's 8-bit digital memory, you can enjoy
a high quality picture and a range of different play modes even with
a long-playing disc (CLV).
Random Playback (For LOs, this function is only available with
discs containing TOC.)
All chapters of one side of a disc can be played in random order .
Hi-Lite/Intra Scan Playback
Hi-Lite Scan - CD, CDV-audio part
Playback starts from a point 1 minute after the beginning of the
track, and each track is played for about 8 seconds. Also, Hi-Lite
Scan playback can be started from the desired minute and
second on each track.
Intro Scan - LD, CDV-video part
The beginning of each chapter/track is played for about 8 seconds.
Direct CD Function
Pressing DIRECTCD on the front panel instructs the unit to use the
CD disc table, which reduces the play starting time. In addition,
since the picture circuit does not function, the player eliminates the
interference between signals and reproduces more pure sound.
Last Memory Function
This lets you watch a LD part way through, and then resume
watching it later from where you left off.
Compatibility with Many Disc Types and Sizes
In addition to conventional LDs (12 inch, 8 inch), CDs (5 inch), and
CDV discs (5 inch), the player can play thin-type 8 inch LDs and 3
inch CD singles without an adapter.

This unit is a CD VIDEO SYSTEM compatible player which can play
CDs, CDV discs, and LOs.
• The marks shown in the right column are printed on the labels
and jackets of the corresponding discs.
This player can play the following seven types of discs without
using an adapter:
8 cm ] ~@--- Digital audio
(3 in.) ~ (max. 20 min.)
Digital audio
(max. 74 min.)
CDV (one-side recording) Digital audio
~
(max. 20 min.)
(Audio part)
i~i~J r-re@ D gital audio +
~ Video
(max. 5 min.)
(Video part)
VSD (Video Single Disc)
(one-side recording)
[
@(@)-Digitalaudio+
12cm V~oo
(5 in.) @(max. 5 min.)
.In the operating instructions in this manual, the VSD
is treated as a kind of CDV.
20 cm
(8 in.)
20 cm
(8 in.)
Digital/analog
audio +Video <it:: > LD
(CAV: max. 30 CD VIDEO
min. per side
CLV: max. 60
min. per side)
Digital/analog
audio +Video
(CAV:max. 14
min.
CLV: max. 20
min.)
Digital/analog
audio +Video
(CAV:max. 14
min. per side
CLV: max. 20
min. per side)
@D~~
DIGITAL AUDIO
**
<it $>
CDVIDEO
VIDEO~
SINGLE
DISC
*
e
LASEROISC
*
e
Discs other than those noted above cannot be played back with this
player, (i.e., Video CD, CD-ROM, LD-ROM, Hi-Vision LD, etc.)
HOW TO PLACE A DISC
Place the disc in the correct position by using the appropriate disc
guide groove.
CD disc table: II i I
LD GLOSSARY
Chapter number
Chapter numbers are used to indicate the boundaries of the
sections on a disc. If chapter numbers are recorded on a disc, it is
also indicated on the jacket of the disc, etc.
Frame number
Frame numbers are the numbers assigned to each picture frame
on a CAV disc.
Time number
Time numbers indicate the time elapsed from the beginning of a
CLV disc.
CDV ICD GLOSSARY
Track number
Track numbers indicate the boundaries of the sections, or "tracks",
on a disc. Track numbers are assigned consistentlythroughoutthe
audio part and video part of a CDV disc.
TOC
The TOC (Table of Contents) section is just like the table of contents
of a book, and contains information on the contents (number of
tracks, playing time, etc.) of the disc.
• Some LD discs are not provided with a TOC section.
*This is the unified symbol mark of LASERDISC (LaserVision
videodisc).
LaserDisc players and discs which bear this symbol and use the
same television system, are mutually compatible.
** A Digital Audio with Multi Audio Disc (CD VIDEO LD) and a CDV
(CD Video CDV) are referred to as CD Video discs. CD Videodiscs
are recorded with subcodes, which are the non-audio recordings
of TOC (Table of Contents) data such as track numbers, index
numbers, etc. However, there are some discs without these
marks.
• There are some discs marked with the e mark instead ofthe
~ U~R=
CDVIDEO mark.
• There are some disc without the ~ LD mark.
@Do~rn
(DIGITAL VIDEOI
or r£ J cannot be played.
VIDEO CD
(Video CD is a digital audio/video recording in MPEG format, up
to 74 minutes long.)
7
<VRB1139 >
En

TYPES OF DISCS THAT CAN BE PLAYED WITH
THIS UNIT
The CD VIDEO SYSTEM is the standard name for the" optical video
disc with digital audio" system that encompasses both LDs and
CDV discs.
The following mark is the standard mark for the CD VIDEO SYSTEM
and is found on all players and discs which conform to the CD
VIDEO SYSTEM format.
The following systems are included in the CD VIDEO SYSTEM:
<. it »
CD VIDEO
.CDV (CD VIDEO CDV) discs
• LaserVision Discs (CD VIDEO LDs) containing digital audio with
sub codes.
• Compatible players which can play CDs and CDV discs .
• Compatible players which can play CDs, CDV discs, and LDs.
CD VIDEO LDs
A CD VIDEO LD is an LD with digital audio which is encoded with
sub codes (data such as TOC and track number data, excluding
audio and video signals).
Two types of standard LaserDisc are available - standard play
(CAV) disc and extended play (CLV) discs - which differ with
respect to their signal recording systems.
CAVDISCS
The jackets and labels ofthese discs are marked with a "Standard
Play Disc CAV" or "Standard Play" indication.
CLVDISCS
The jackets and labels ofthese discs are marked with "Extended
Play Disc CLV" or Extended Play" indication.
LASERVISION DISCS WITH DIGITAL AUDIO
The jackets and labels of these discs bear the following mark.
diGital
RUDie
diuital
SOUN
These are LaserDiscs which contain digital audio signals in addition
to conventional analog audio signals. This feature allows the high
image quality of LaserDiscs to be enjoyed together with the
superior quality of digital audio.
LASERVISION MULTI AUDIO DISCS WITH DIGITAL AUDIO
The jackets and labels of these discs bear the following mark.
~i~~p and MULTI AUDIO or dJWU}MUlTIAUDIO
These are LaserDiscs in which the recorded digital and analog
audio signals differ in content. This allows the user to enjoy two
different audio soundtracks by switching between the digital and
analog audio.
These are compact discs which also contain video signals. Ofthe
total 25-minute playback time of a CDV disc, 20 minutes are
encoded with conventional CD digital audio signals (the "audio
part"). The remaining 5 minutes are encoded with both video and
digital audio signals (the "video part").
In normal playback mode, the unit plays the audio part after the
video part is played back.
8
<VRB1139>
En
I CARE OF DISCS
How to hold discs
When loading or removing discs, try not to touch their playing
surfaces.
Cleaning
Fingerprints or other dirt on the disc may affect sound and picture
quality.
To clean your discs, use a soft clean cloth to wipe them. If
necessary, moisten a soft cloth with diluted neutral detergent to
remove heavy dirt or fingerprints .
Do not wipe in a circular
direction.
(Concentric scratches in the disc
groove tertd to cause noise.)
Gently wipe from the inside
toward the outer edge.
Discs must not be cleaned with record cleaning sprays, or static
prevention sprays, etc. Also, do not use volatile liquids such as
benzine, or thinner, etc.
NEVER PLAY CRACKED OR WARPED DISCS
•• The disc revolves in the player at a high speed when it is played.
Never playa cracked, scratched or warped disc. This may
damage the player or cause it to malfunction.
After using discs, store them upright
After playing a disc, always remove it from the player and return
it to its jacket. Then store it standing upright away from heat and
humidity.
• Store discs carefully. If you store discs at an angle, or stacked on
top of each other, discs may become warped even when in their
jackets.
• Do not leave discs in locations such as the seat of car, which may
become excessively hot.
CAUTION WHEN USING THE DISC
All rights reserved.
Unauthorized public performance, broadcasting or copying is a
violation of applicable laws.

I BASIC CONNECTIONS
Connect the supplied video cord.
Ifthe TV has an S-VIDEO input jack, connect a the supplied S-VIDEO cable.
This unit features 3-D YIC separation circuitry so it is recommended you
connect an S-VIDEO cable to obtain superior picture quality.
Stereo amplifier
rOOO OJ
<::> m
~RINPUT~
CD
I R
,.
I
I
,
I
~~)
Connectto the stereo amp's CD, LD,VDP, or other input
jack with the supplied audio cord. (Do not connect to
the PHONO jack.)
You can connect to the TV's audio input jack, but it is
recommended you connect to the stereo amplifier to
obtain superior audio playback quality.
I These connections are also possible
elf you have a stereo amplifier with optical or coaxial inputs,
refer to page 10. Connection to this unit's digital output
(optical or coaxial) is possible.
.If you have a Pioneer projection monitor, refer to page 11.You
can connect to this unit's control jack for system remote
control.
.If you have an AV amplifier bearing the Pioneer ~ mark, refer
to page 11.
You can connect to this unit's control jack for system remote
control.
Align the plug
correctly and push
into the S-VIDEOjack.
~
O~A Splug
R~
If you use an S-VIDEO cable, refer to your TV's operation
manual.
Finally, connect the power
cord to the wa II socket.
Once the power cord is connected, even if you
switch power OFF, power is still supplied to the
player's built-in memory (Resume play function
etc.). Forthis reason, make sure the unit is connected
to the wall socket. If you connect to the amplifier's
standby power SWITCHED OUTLET socket or other
socket, functions such as Resume play will not
operate.
AC-3 RFOUT terminal:
This terminal is intended for use with Dolby AC-3* components
(*1) planned for future release. With this terminal, you will be
able to connect an AC-3 RF input of amplifiers and surround
processors, and playback LDs formatted with Dolby AC-3 (*2).
(*1) Indicated with gmD~':'~~':::~Dcl(For hardware)
(*2) Indicated with gmD~~.~NDLI (For software)
III You cannot playback currently available LDs, LD players, AV
amplifiers, etc., with this terminal.
• Do not connect this terminals to the audio input terminal of a
normal stereo or AV amplifiers.
* "Dolby", "AC-3"and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
9
<VRB1139 >
En

The optical fiber cable and coaxial cable are not supplied with this unit. Use a separately sold optical fiber cable or coaxial cable for the
digital jack connections.
Connecting to the optical digital jack
• This unit can be connected to an amplifier equipped with an
optical digital jack.
Stereo amplifier
rooo6J
c::::::;> 'co::>
Finally, connect to the
wall socket.
• When using the OPTICAL DIGITAL OUT jack:
1. Remove the protective dust cap from this unit's OPTICAL
DIGITAL OUT jack.
2. Use an optical fiber cable to connect OPTICAL DIGITAL OUT
jack of this unit to the optical digital input jack ofthe amplifier.
• Align the plug ofthe optical fiber cable with the optical digital
jack and fully insert the plug to make a secure connection.
NOTES:
• When making optical digital connections, this player can only be
connected to an amplifier which uses the same type of optical
transmissions/reception module.
• Fully insert the optical fiber cable plugs all the way into the jacks .
• Be careful not to fold or crimp the cable. When coiling an optical fiber
cable for storage, make sure the diameter of the coil is 15 em (6
inches) or larger.
• Use an optical fiber cable with a length of 3 m (10 feet) or less.
• Protect the optical fiber cable plugs from scratches and dust.
• When the unit is not connected using an optical fiber cable, be sure
to keep the protective dust cap plugged into the optical digital output
jack at all time.
[ Connecting to the coaxial digital jack
.This unit can be connected to an amplifier equipped with a
coaxial digital jack.
L. Finally, connect to the
wall socket.
10
<VRB1139>
En

I SYSTEM REMOTE CONTROL CONNECTION
WHEN COMBINED WITH OPTIONAL PIONEER
PROJECTION MONITOR (or COMPONENT DISPLAY)
Connect the VIDEO OUT jack of the player to the video input jack
ofthe projection monitor (or component display), and connect the
AUDIO OUT jacks of the player to the audio input jacks of the
projection monitor (or component display).
System Control
By connecting the CONTROL IN jack of the player to the remote jack
ofthe projection monitor (or component display), the system can
be controlled by the remote control unit ofthe player at the remote
control sensor ofthe projection monitor (or component display) .
• Use a commercially available cord with mini-plugs for the
connection.
Please refer also to the operating instructions for the projection
monitor (or component display).
NOTE
When system control connections have been made, the player cannot
be directly controlled by the remote control unit. To operate the player,
aim the remote control unit at the projection monitor (or component
display).
PERFORMING SYSTEM CONTROL WHEN THE PLAYER
IS COMBINED WITH A PRODUCT THAT HAS THE ~
MARK
System control can be performed when the player is combined
with an optional AV amplifier, which can provide centralized
control of Pioneer products with the ImiII mark. Connect the VIDEO
OUT jack ofthe player to the video disc video input jack ofthe AV
amplifier and connect the AUDIO OUT jacks of the player to the
audio input jacks of the AV amplifier.
Connect the CONTROL OUT jack of the AV amplifierto the CONTROL
IN jack ofthe player using a commercially available cord with mini-
plugs .
• For details concerning the connection and operation methods,
please refer to the operating instructions for the AV amplifier.
NOTE
When a connecting cord has been connected to the CONTROL IN jack,
direct control of the player with the remote control unit is not possible.
Operate the player with the remote control unit by aiming it at the A V
amplifier.
Projection
monitor
Commercially available
cord with mini-plugs
(without load)
Commercially
available cord
with mini-plugs
(without load)
/
11
<VRB1139 >
En

G) POWERSTANDBY/ON switch
Press to switch power ON/OFF (STANDBY).
@ STANDBY indicator
This lights to indicate power standby.
When power is switched ON, it goes out.
® Disc table (P.7)
® CD disc table (P. 7)
® DIRECTCD button/indicator (P. 15)
® DISCSiDE A/B button (P. 15)
(J) Display window
® Stop button (Il) (P. 14)
® Play/Pause button (..-/11) (P. 14)
Press when power is OFF, and if there is a disc in the table, power
is switched on and play starts.
® OPEN/CLOSE button (~) (P. 14)
Press when power is OFF, and power is switched ON and the disc
ta ble opens.
QD FL OFFdisplay button/indicator
When you press the button, the indicator on top ofthe button lights
and the display window switches OFF. Switching off the display
prevents low level noise from adversely affecting sound quality.
Press again to switch the display ON.
@ FILM MODE button/indicator (P. 19)
Switch ON if desired when watching a movie disc.
When you switch it ON:
••The display window turns OFF. You can switch it ON/OFF with the
FL OFF display button D.
••Screen display (refer to P. 25 for display indications) switches
OFF.
II When changing disc sides, the picture is usually the memorized
picture, but when using the Film mode, the screen is black.
@ Remote control sensor (P.4)
I DISPLAY
G) Side A indicator
@ Function operation indicator
Indicates functions and operations. Refer to function explanations
for details concerning indications.
® Side B indicator
® 1/L channel, 2/R channel indicator
Indicates audio output channel.
12
<VRB1139>
En
® MIN/SEC indicator
Indicates play time in minutes and seconds.
® TOTAL/REMAIN indicator
Indicates remaining play time (REMAIN) and the total play time of
the side (TOTAL).
(J) FRAME/TIME indicator
Indicates frame number and elapsed play time.
® Chapter/Track indicator
Indicates chapter number and track number.

I REMOTE CONTROL
CD POWER button (P. 14)
@AUDIO D/A button (P. 15)
®lighting button (P. 13)
®Program (PGM) button (P. 24)
®Chapter/Time (CHP/TM) button (P. 21)
®RANDOM button (P. 22)
(]) STROBE button (P. 19)
®LAST MEMORY button (P. 16)
®Highlight/lntro Scan (HIUTE/INTRO) button (P.22)
@ ONE-SHOT MEMORY button (P. 20)
(jJ)JOG MODE button (P. 17)
@ DISC SIDE A/B buttons (P. 15)
@l JOG Dial (P. 17)
®Memory (MEMO) button (P. 18)
@SELECT button (P. 18)
@DISPLAY button (P. 15, 17,25)
@OPEN/CLOSE button (P. 14)
®REPEAT button (P. 23)
@l REPEAT A/B button (P. 23)
®CLEAR button (P. 21 - 24)
@Number button (P. 14,21,24)
@STEP buttons (..•••II/II~) (P. 16)
@MULTI-SPEED buttons (..•••/~) (P.16)
@SKIP buttons (I+ll/~) (P. 15)
@PLAY button (~) (P. 14)
@SCAN buttons (..•••..•••/~) (P. 17)
@ PAUSE button (II) (P. 14)
@ STOP button (II) (P. 14)
®SHUTTlE ring (P. 17,18)
When the LIGHTING button is pressed, the buttons indicated in the
illustration will light for about 3 seconds.
The light will become dim and the range of the remote control
operation will become shorter when the batteries are exhausted.
If this occurs, replace both batteries with new ones.
NOTE:
The JOG MODE button lights up each time the button is pressed
regardless of the LIGHTING button setting.
These buttons will
light up.
13
<VRB1139 >
En

I TO PLAY AN LD, CDV OR CD
~,p~m ~
~ o~
o[pqoo
00000
00000
00000
0==
000=
1. Turn on the power of this unit.
If ~ on the front panel is pressed in the
STANDBY mode, the power is automatically
turned on and the disc table is opened.
OPEN
_ (ClOSE
g~ ...
~\
3. Place a disc along the proper disc guide
groove.
CD/CDV : With the labeled side up.
LD: With the desired side's label up.
4. Start playback .
• When ~/II is pressed in STANDBY
mode with a disc loaded in the
player, the power is turned on
automatically and playback starts.
To play from the desired chapter or track
<Direct search>
Press the digit button of the chapter/track number to be played
first.
(Example) To play from chapter/track No.3
To search for chapter or track number 10 or above:
Use 0Qj button
(Example) To enter 17 :0Qj, [I]
To enter 30 : 0Qj ,0Qj ,0Qj, @]
After removing the disc from the disc table,
press ~ or ~/II to close the table.
<Normal search>
Chapters can also be searched using CHP/TM.
(Example) To search chapter No. 17
ICHPfTM IICHPfTM IIJJOJ~
The 0Qj button cannot be used in this case.
Convenient function
When power is OFF (STANDBY), if you press the OPEN/CLOSE on
the unit, power switches ON, and the disc table comes out (Auto
Power function).
To avoid malfunctions, be especially careful about the following
points:
• Do not place any object other than a disc on the disc table.
• Do not move the player while a disc is playing. This will cause the
disc to be scratched.
• Be careful not to catch your finger in the disc table section while
the disc table is being retracted into the unit. Also, be careful that
children do not put their hands inside the unit while the disc table
is open. This may cause injury.
* Precautions concerning disc loading
• Do not place more than one disc on the disc table. If two discs are
placed one on top of the other on the disc table, discs may be
scratched and/or a malfunction may occur.
• Playback is not possible unless the disc is placed properly.
14
<VRBl139>
En

To specify side A or B for play:
Side A refers to the upper side of a disc loaded in the table, and
B side refers to the reverse side. This is different from the actual
A and B sides ofthe disc.
To play side A only, press the DISC SIDE A without pressing
~/II. After side A has finished, the player stops. To play side B
only, press the DISC SIDE B without pressing -'/11. After side B
has finished, the player stops.
Indications when disc sides change
eWhen changing from side A to side B
Side A - - - - - - - - - ,
I
Side B - - - - - - - - - j...,J
eWhen changing from side B to side A
SideA ---------~
I
Side B - - - - - - - - - ~
Since the picture circuit is deactivated and the interference
between signals is eliminated with the Direct CD function, more
pure sound can be reproduced.
e When the Direct CD function is activated, the player does not
display information on the monitor screen.
eln Direct CD mode, time for starting play becomes short
compared with that of normal play operation.
Afi:er performing step 1 on the previous page, press the DIRECT
CD.
Each time AUDIO D/A is pressed during playback, audio output
is switched.
For example:
eto hear only the analog audio of a disc with digital audio
eto hear only one channel of stereo disc
eto select audio of the multiplex disc
LD
LD with digital audio
Audio source can be switched between digital audio, analog
audio, L channel and R channel of stereo audio.
c:
digital audio _ analog audio _ Lchannel of
(stereo) (stereo) analog audio l
Rchannel?f _ L.channel?f _ Rchannel of -J
digital audio digital audio analog audio
e With a disc encoded with CX auto-switching signals
C ex off (stereo)_ ex on (stereo) - ex on (L channel) J
ex off (Rchannel) - ex off (Lchannel) -- ex on (Rchannel)
e With a disc encoded with CX auto-switching signals
r stereo audio - L channel -- Rchannel ::=J
To exit Direct CD mode:
Press DIRECT CD again.
To play an LD:
Cancel the Direct CD mode. Otherwise, the LD cannot be set on
the disc table.
NOTE
During LD play, the player does not enter Direct CD mode even if
DIRECT CD ispr~ssed.
During CDVplay, the player automatically turns on and off the picture
circuit according to the video part or audio part in the Direct CD mode.
On screen display:
The information is displayed on the screen by pressing DISPLAY
on the remote control unit. Also, when programming or editing,
the information is displayed.
By turning off the screen display or canceling the input mode, the
player automatically turns off the picture circuit, and the screen
turns to black.
LD with analog audio
CDorCDV
r stereo audio -.. L channel -- Rchannel ::=J
With a Multi Audio disc (an LD bearing the l.i i~p~ mark and the
MULTI AUDIO mark or the t.J~~MUlTIAUDIO mark), you can listen to
the various audio tracks recorded on the disc by using AUDIO to
select between the analog and digital tracks, and to select
between the left (1/L) and right (2/R) channels.
NOTE
With AC-3 discs, sound is not heard when the analog R channel is
selected.
Discs marked with the D~ mark
Discs marked D~ are recorded with the CX noise reduction
system for powerful audio reproduction with little noise. (Analog
audio only) However, some discs marked D~ are not encoded
with the signals necessary to instruct the unit automatically
switch on the CX system. If sound is noisy or undulates when a
disc with a D~ mark is played, press AUDIO D/A on the remote
control unit.
eD~ is a trademark of CBS Inc. This player meets the CX
EXPANDING SPECIFICATION.
Searching for the
beginning of the
chapter (track)
currently playing.
Searches fot the
SKIP beginning of the next
II 1+1I I I~ II - chapter (track).
Press a button repeatedly or hold it depressed (only with the
remote control unit); the chapters (tracks) will be skipped
successively.
15
<VRB1139 >
En

g STEP
Reverse --II ...• 11 I I 11.- 11-- Forward
Press for reverse
playback.
MULnSPEED Press for forward
..•• I I .- 11--playback.
When MULTI-SPEED is pressed once, playback speed becomes
1/8 ofthe normal playback. Each time the same button is pressed,
playback speed changes as shown in the table.
Automatic picture stop
Some of discs contain a recording of a special code called the
"picture stop code", which turns normal play or slow play
automatically into still frame display.
To cancel the automatic picture stop operation, press and hold
~/II for more than 2 seconds until "PSC ON" (picture stop cancel
ON) is displayed on the screen. To re-activate, press and hold •• /11
for more than 2 seconds again until "PSC OFF" is displayed.
When playback of an LD is stopped, it can be resumed from
where it was interrupted.
In standby mode, by pressing LAST MEMORY the power is
automatically turned on and playback of the loaded disc is
resumed.
LAST
MEMORY
~
After playback of an LD is stopped by pressing II, leave the disc
in the player. Press LAST MEMORY.
To resume playback from where playback is stopped:
position slightly before the
playback is stopped. position where playback is
stopped.
Press LAST MEMORY once. Playback starts from the point
slightly before where II is pressed.
16
<VRB1139>
En
speed dislay
1/8
1/2
x2
1/2
1/8
1/30
Playback speed
1/8 of the normal playback
half the normal playback
twice the normal playback
half the normal playback
1/8 of the normal playback
1/30 of the normal playback
During Multi-speed playback:
Sound is not output.
Playback of the last played part, repeating normal playback for
about 2 seconds and fast-forward playback alternately, then
normal playback from the point slightly before where playback
is stopped. Repetition of normal playbackfor about 2seconds
and fast-forward playback.
Press LAST MEMORY twice.
Playback starts from the beginning ofthe disc, repeating normal
playback for about 2 seconds and fast-forward playback
alternately. Then player enters normal playback mode from the
point slightly before where II is pressed.
When LAST MEMORY is pressed during fast-forward playback,
normal playback starts from the point slightly before where
previous playback was stopped.
NOTES:
• Last memory function is carried out only for playback of an Lo. With
CO or COV, Last memory does not function.
.If.- is pressed after playback is stopped by pressing II, playback
starts from the beginning of the disc.
• Leave the disc in the player after playback is stopped. If the disc is
once removed, Last memory does not function.
• Always connect the power cord to the active AC outlet.

Using the Shuttle Ring and Jog Dial changes playback speed and
direction. This function is useful to search for a desired passage.
SCAN PLAY SCAN
II - II II II II - II
8G
cs
0]00
JOG MODE button/Jog
indicator
Jog dial (LD/video part of CDV)
Playback is advanced according to the speed and direction of
rotation of the JOG dial. Both forward and reverse playback is
possible, and frames can be advanced at speeds of 1/2 speed,
normal speed, and double speed. Rotating the jog dial clockwise
forwards playback. Conversely, rotating it counterclockwise left
reverses playback. To use the JOG dial on the remote control
unit, first press JOG MODE so that Jog indicator lights. During
playback of an LD or CDV video part, when the JOG dial stops
rotating, the frame is displayed.
Shuttle ring
While rotating the SHUTTLE ring, playback advances or reverses
at high speed. There are four scan modes which can be selected
with rotational angles of the SHUTTLE ring.
x2 speed: Slightly rotate the SHUTTLE ring. Scan speed becomes
about x2 the normal playback speed.
x5 speed: Further rotate the SHUTTLE ring. Scan speed becomes
about x5 the normal playback speed.
Low Scan mode: Further rotate the SHUTTLE ring. Scan speed
becomes about x10 the normal playback speed.
High Scan mode: Further rotate the SHUTTLE ring. Scan speed
becomes about x20 the normal playback speed.
To resume normal playback after using the JOG dial:
Press PLAY~.
When not using the JOG dial on the remote control unit, set JOG
MODE to OFF.
Although JOG MODE will automatically switch OFF (The Jog
indicator goes out) approximately 5 minutes after you stop operating
the JOG dial, it is recommended that you set JOG MODE to OFF as
soon asyou finish using the JOG dial in orderto prevent unnecessary
battery consumption.
g II -
When the button is pressed, scan speed is x10 the normal
playback speed for about two seconds and then becomes x20
the normal playback speed.
To switch the screen display, press the DISPLAY button.
eWith video part of CDV, High Scan mode cannot be carried out.
e CDs or audio part of CDVs : Sound is heard at low volume level
while scanning.
Others: Sound is muted.
Notes on CAV:
While scanning, noise may occur on the screen. This is not a
malfunction.
Notes on CLV:
• While scanning, the color of the image may fade out or the image
sometimes fluctuates.
lit The scan speed is different between inner tracks and outer tracks.
17
<VRB1139 >
En

I PICTURE QUALITY ADJUSTMENT (V-DNR 3D)
When playing some LDs, there may be noise or color distortion. 3D digital NR reduces this noise and color distortion. You can independently
adjust luminance (brightness) and saturation (color) as desired. This unit also features 3D Y/C separation circuitry. For minimal cross color and
improved SIN ratio with still images and images that move very little, turn the shuttle clockwise for increased 3D Y/C separation. For clearer
fast moving images, turn the shuttle counterclockwise to move from 3D Y/C separation to 2D Y/C separation.
Selecting picture quality
.Select with the remote control's memory button. This unit has
three memories. You can memorize up to three picture quality
settings.
• When you plug in the power cord and first switch power ON, the
setting is STANDARD.
STANDARD:
This is the standard (recommended) setting.
Indication is displayed
for two seconds.
NR OFF:
This is the NR OFF setting. Other settings are the same as
STANDARD.
L_OFF _J
Indication is displayed
for two seconds .
• When picture selection is STANDARD with NR OFF, you can
confirm settings by pressing the SELECT. (Adjustment is not
possible.)
• Press MEMO once, and the current mode is displayed for two
seconds. Press the button while the current mode is displayed to
switch to the next mode .
MEMORY:
These are your settings. Confirm setting adjustments by pressing
the SELECT. This puts you in the Picture Quality Adjustment
mode.
•
J
l,mmv 2
•
J
L·,'"
• When you plug in the power cord and first switch power ON, the
settings in MEMO are STANDARD.
Select Y-NR with the SELECT, and adjust with the SHUTILE
ring. You can vary noise reduction for brightness (in 10 steps).
At the maximum setting, noise reduction is maximum.
Memory 1
"VNR
C NR
3D Vie
Sharp
Minllllll--- Max
Minlll-· -- -- Max
Minlll-· ---- Max
Minll.l· ---- Max
Standard settings
Settings adjusted with
the shuttle ring
Select Sharp with the SELECT, and adjust with the SHUTTLE
ring. Atthe maximum setting, vertical edges are attheir sharpest.
~ ~~ ~·O-·~·~ M
y
e.mNoR",,'
~ lbdJ • Minllll •• ---Max
C-NR Minill-' ---- Max
V-DNR 3D 3D. Y/e Minill-' ---- Max
~ sHGnLE';Og ~." ""••••. ----~
.With video output jack connection, picture quality is
changed by Y-NR and C-NR only.
• With S-Video output connection, picture quality is changed
by Y-NR, C-NR, 3D Y/C, and Sharp adjustments.
• If you do not operate the memory button or shuttle ring for 15
seconds, setting displays go off, but setting data is stored in
memory.
18
<VRB1139>
En
Select C-NR with the SELECT, and adjust with the SHUTILE
ring. You can vary noise reduction for color (in 10 steps). Atthe
maximum setting, noise reduction is maximum.
Memory-1
Y-NR
'C-NR
3D. vie
Sharp.
Min 111111-- - Max
Minlll-· ---- Max
Minll.-·----Max
Minl.l.o----Max
Select 3D Y/C with the SELECT, and adjust with the SHUTILE
ring. The maximum setting is for maximum 3D Y/C separation.
Memory-1
Y-NR
C-NR
'30. vie
Sharp
Minl ••••• --- Max
Minl •• -· ---- Max
Minill-' ---- Max
Min ••••• ---- Max
Reduces cross color with
images that move very
little .
Increased 2D : Assures a clear picture
with fast moving images .

NOTE:
• During play of aCDV s audio part, the selected picture quality settings
for the video part are stored in memory.
• Picture quality settings are stored in memory until the power cord is
disconnected from the wall socket.
• You can adjust V-DNR 3D settings even when not playing adisc, but
you wont notice the effect of these adjustments until images are
displayed on screen.
• Depending on the disc and the scene, it may be difficult to see the Y-
NR, C-NR noise reduction effect, 3D Y/C cross color reduction, and
sharpening of edges with Sharp.
• With pictures of still images, Y-NR and C-NR are OFF, regardless of
settings, and 3D Y/C is set to minimum. Which means that adjust-
ments for still images will change setting values (displayed values)
but not picture quality. (CAV disc Y-NR, C-NR, Sharp are also effective
for still images.)
• When you set V-DNR 3D to STANDARD OFF, adjustments are not
possible, but pressing the Select button displays settings for two
seconds.
Press FilM MODE on the front panel.
,,1/
-0-
/FILM"
MODE
\\
The FILM MODE indicator will light.
Set to ON in accordance with your tastes, particularly when
viewing movie discs.
When the film mode is ON:
• The display in the front panel display window turns off (can be
turned on/off using the FL OFF).
• The screen display (see page 25) does not function.
• The screen is blacked (blanked) while changing disc sides.
• The TOC is not read, in order to shorten the side-changing time
as much as possible. As a result, random playback cannot be
performed, even when the discs contain TOC codes. In addition,
the remaining time ABS time and total time displays will not
function. (These displays will function normally if the disc is
played back once before using the film mode.)
• Press the Film Mode button once more to switch OFF.
NOTE:
When the film mode is ON, the display in the front panel display
window will not appear even when the power is turned on. In
addition, the player memorizes the ON/OFF condition of the film
mode even if the power is turned off, so the display will remain off the
next time power is turned on. To turn the display on again, press FL
OFF.
Still with Sound Playback
With the Still with Sound Playback function, you can stop the
video image and display a still frame while continuing to listen to
normal playback of the audio part.
_ STROBE
g~
During normal playback, press
STROBE when the desired scene
appears on the screen.
The screen is frozen at the current frame and the audio continues
playing.
To resume normal playback:
Press PLAY~.
Strobe Motion Playback
With the Strobe Motion Playback function, the still frame displayed
using the Still with Sound Playback function is replaced with
successive still frames at regular intervals (variable), resulting in
a strobe motion effect.
STROBE
-
g~
After pressing STROBE, press
STROBE.
The still frames shown on the screen are replaced in sequence
according to the selected replacement interval, while the audio
continues as normal.
By repeated pressing of STROBE, one of four different
replacement intervals can be selected.
STROBE button Screen Replacement interval
display
[
STROBE Still
1/90 Every 3 seconds
1/30 Every second
1/8 Every 8 frame
1/30 Every second
1/90 Every 3 seconds
Normal playback is carried out at 30 frames/second.
In order to maintain normal audio playback, faster than normal
playback modes such as x2 are not provided.
To resume normal playback:
Press PLAY~.
19
<VRB1139 >
En

The One-Shot Memory function stores the image of a single
frame in the player's memory. When the One-Shot Memory
function is activated and playback ofthe current disc is completed,
the stored image is recalled and displayed on the screen. Since
the image is displayed even after playback is completed, this
function is convenient for displaying an image on the screen
while changing discs. This function also allows you to change
discs and listen to the audio of a CD or CDV disc while the image
remains on the screen as a background video image.
ONE·SHOT
MEMORY
(\
During normal playback, press
ONE-SHOT MEMORY when the
desired scene appears on the
screen.
•••
-----
One-Shot ...J
The frame displayed when the button was pressed is stored in
memory.
"One-Shot" is displayed on the TV screen for a few seconds.
20
<VRB1139>
En
After playback is finished, the memorized frame appears on the
screen. In this state, even if you change discs the scene displayed
on the TV screen does not change. To cancel the One-Shot
Memory function in order to play the video from another disc,
press ONE-SHOT MEMORY again.
With CDV discs, the following operation can also be performed:
1. Press ONE-SHOT MEMORY during playback ofthe video part.
2. Perform a direct search to the audio part.
• The memorized image ofthe video part is displayed on the
screen while the audio part is played back.
NOTES
• With the One-Shot Memory function, since the player memorizes
the selected frame by recordiing its address, aframe which is
slightly different than the one you thought you selected may be
displayed.l,/so, ifseconds are not recorded on the disc, acompletely
different frame may be displayed.
• While the memorized image is displayed on the TV screen, the
character display will not appear on the screen. The display on the
player can be switched by using DISPLA Yon the remote control
unit.
• With two-sided LOs, if disc side is switched after ONE-SHOT
MEMORY ispressed during playback, the One-Shot Memory function
will be canceled,
• One-Shot Memory does not function in the Direct CD mode.