
EDIT
Set
Enable
Peak
Operation Mode
Enable Lamp OFF
Audio Controls Protected
EDIT
Set
Enable
Peak
Edit Mode
Enable Lamp ON
Audio Controls Exposed
Calibration Mode
LED Display Pattern
--- Press ~3 sec.
--- Press ~3 sec.
Idle ~10 sec.
• Momentary Press
--- Sustained Press
Operation Mode
Edit Mode
Quick Start Guide
Lavry Savitr (AD-24-200)
ultra-precision analog to digital converter
lavry Savitr AD-24-200
0-1-2-
3-
4-
5-
6-7-
8-
9-10-11-12-13-14-15-16-17-18-19-20-22-24-26-28-30-33-36-39-
44-
50
-
∞
LEFT
dBFS
RIGHT
44.1
88.2
176.4
48
96
192 EXT
MAIN
44.1
88.2
176.4
48
96
192 EXT
AUX
2dB
4dB
6dB
SOFT SAT
S
M
MX
Low
Latency
SPECIAL GAIN
INPUT
TRIM
RL
Peak
EDIT
Set
Enable
• Change Meter Illumination
• Select Sample Rate (Internal Mode only)
--- Change Clocking Mode
• Change User Control Illumination
ON : External Clocking
OFF : Internal Clocking
• Refresh Peak Hold
--- Enable/Disable function
• Low Latency / Best Quality
• Set all selected options
Required to save changes
ON : Edit Mode
OFF : Operation Mode
--- Exit to Operation Mode
--- Enter Edit Mode
• Select Soft Saturation Level
• Select MX Mode On/Off Increase Gain
Decrease Gain
In EDIT Mode, no changes
to settings occur
until SET is pressed
Caution:
Rotating beyond the
adjustment range may cause
mechanical damage. (See Manual)