LCG ST-DJ01 User manual

USER'SMANUAL
ST-DJ01
TITAN LIGHTING STANDS

Page 1
DESCRIPTION:
Thank you for choosing a ST-DJ01 light stand system.
The ST-DJ01 is a triangle stand truss system. This
medium duty truss lighting stand package includes 2
high qualtity stands (ST-02), 2X 5' (1.5M) triangle truss
sections that create a 5' (1.5M) or 10' (3M) span and 2x
T-truss adaptor ( ST-SA01). That you may easily mount
your truss to the stands. you can mount up to 220 lbs
(100kg), truss pipes are 1'' in diameter. Truss sections
are 6'' in overall width.
SPECIFICATIONS:
Maximum load: 220 lbs (100 kg)
Maximum height: 9'8'' (3 m)
Minimum height: 5'4'' (1.65 m)
Weight Stand: 24 lbs ( 11 kg) each
Material: treated steel
Finish: epoxy black painting /elctro-galvanised
INCLUDED:
2 X ST-02 Stand
2 x ST-SA01 T-Truss adapter
2 x TRT150 Truss triangular 5' (1.5 m)
ST-SA01
TRT150
ST-02
LCG PRODUCTS ST-DJ01 User manual

LCG products user instructions---- ST-01 light stand
Page 2
6A)(7<,16758&7,216
v7RDYRLGSUREOHPVDFRPSHWHQWSHUVRQVKRXOGLQVSHFWDOOULJJLQJ
KDUGZDUHVWDQGVDQGHTXLSPHQWEHIRUHHDFKXVHDQGSHULRGLFDOO\GRD
PDMRULQVSHFWLRQIRUVLJQVRIZHDUDEXVHDQGJHQHUDODGHTXDF\DV
ZHOODVSHUIRUPDQ\PDQXIDFWXUHUUHFRPPHQGHGSUHYHQWLYH
PDLQWHQDQFHRQVFKHGXOH
Ensure that the stand is positioned on hard stable surface, in
suitable location, on firm ground and clear of overhead obstacles.
Stabilize legs before lifting the tower or any load.
When outdoors, secure the tower with braces or cables, in case of
wind.
Check the cable, it should not show damaged or flattened areas
nor broken strands.
For Lifting the tower, turn the winch handle clockwise.
For lowering the tower, turn the winch handle counter-clockwise.
Loading on truss and stands should comply with rated weights.
Lock all the safety mechanisms (safety pins, knobs)
Loads must be centered & balanced on each lifting unit.
Safety chains must be installed on each item attached to unit.
Leave a safety perimeter with a radius 5ft greater than the
maximum height of the stands during lifting and lowering of
loads.
During transport, close all the sections and lock the lifting
carriage.
Do not attempt to move the stand when loaded or in extended
position.
Servicing and repairs must be made by qualified persons.
Cable, pulleys and telescopic masts must be inspected before
each use. Any damaged cable must be replaced immediately.
Annual inspection by an authorized technician is suggested
LCG PRODUCTS ST-DJ01 User manual