LeapFrog Leapster Ultra User manual

Instruction Manual
This manual contains important information. Please keep it
for future reference. Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.

INTRODUCTION
Thank you for purchasing the Leapster®Ultra!
1
Power Button
Headphone Jack
D-PAD
Battery Cover Battery Cover
Home Button
Volume Button
Help Button
B Button
A Button
Speaker
Spinner
Rotatable Screen

PRODUCT FEATURES
1. Home Button
Press the Home Button to quit a level, quit the game, or
return to the previous Menu screen .
2. Help Button
Press the Help Button to hear hints and tips on how to play
the game or navigate the Menu screen.
3. Spinner
Turn the Spinner in game play as needed. The Spinner turns
in both directions.
4. D-PAD
Press the D-Pad left, right, up, or down in game play as
needed. Use this control to scroll through menus or select
games to play.
5. A Button
Press the A Button to confirm and perform game specific
functions.
6. B Button
Press the B Button to return to previous menu or step. Also
to perform game specific functions.
7. Volume Button
Press the + on the Volume Button to increase the volume
and press the - on the Volume Button to decrease the
volume.
8. Power Button
Press and hold the Power Button to turn the system on or
off .
2

INCLUDED IN THE PACKAGE
• Leapster®Ultra
• Quick Start Guide
WARNING
All packing materials, including tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
UNLOCK THE PACKAGING LOCKS
Rotate the packaging locks
counterclockwise several times.
Pull out the packaging locks and
discard.
3

INSTRUCTIONS
Battery Installation
1. Find the two separate battery covers located on the bottom
of the unit, use a screwdriver to loosen the screw and then
open the battery covers.
2. Install 4 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
3. Replace the battery covers and tighten the screw to secure.
NOTE: Make sure the unit is turned OFF when attempting
to replace the batteries.
Game Profile Reset
To reset a game profile to start it over,
highlight a saved profile and press the
following buttons: B + Home + Help +
Left + Right + B + B + Home. This will
reset the selected profile.
4

WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
5

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the
unit to moisture or water.
5. If the unit is not working properly, install a brand new set of
batteries.
TROUBLESHOOTING
If for some reason the program/activity stops working or
malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
6

IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know
that we stand behind our products and encourage you to
contact us with any problems and/or suggestions you might
have. A service representative will be happy to help you.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
CAN ICES-003(B)/NMB-003(B)
7

Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6146
Product Name: Leapster®Ultra
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500,
Emeryville, CA 94608
Website: leapfrog.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
8

9
CONSUMER SERVICES
Creating and developing LeapFrog®products is accompanied
by a responsibility that we at LeapFrog®take very seriously.
We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know
that we stand behind our products and encourage you to call
our Consumer Services Department with any problems and/or
suggestions that you might have. A service representative will
be happy to help you.
UK Customers:
Phone: [phone] (from UK) or [phone]
(outside UK)
Website: www. leapfrog.co.uk/support
Australian Customers:
Phone: [phone]
Website: support.leapfrog.com.au
NZ Customers:
Phone: [phone]
Website: support.leapfrog.com.au
PRODUCT WARRANTY/
CONSUMER GUARANTEES
UK Customers:
Read our complete warranty policy online at leapfrog.com/
warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer
guarantees apply to goods and services supplied by VTech
Electronics (Australia) Pty Limited. Please refer to
leapfrog.com/en-au/legal/warranty for further information.

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
leapfrog.com.au
Read our complete warranty and
legal policies online at
leapfrog.com/legal
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2023 LeapFrog Enterprises, Inc.
All rights reserved.
IM-614600-000
Version:0 US CAN AUS