Lemonda S11 User manual
CONTENTS
1
2
3
4
5
6
Appearance introductionCommon problemCharging and start upAPP downloadBindingFunctions introduction7Maintenance8Warranty card
-----------------
----------------
--------------
------------------------------
--------------
----------------------
----------------------
12345678
HD Screen01
Appearance
introduction
◎The bracelet is made of healthy materials, please be assured to use.◎Due to individual differences, if skin feels uncomfortable while wearing, please stop wearing and consult the doctorButtonLong press to start up/shut down,Short press returnHeart rate LED light Heart rate sensorInfrared lightMagnetic charging1
02
Charging
and start up
◎Please use the special charging cable that comes with the package, Keep charging port clear and dry.
◎Note: Do not use a power adapter with an output of more than 5V 1A to charge, otherwise the circuit
may be burned, resulting in no charging.
Please charge the product for more than two hours before use. Align the charging
port with the metal contacts on the charging base until the charging indicator
appears on the bracelet screen.
2
03
APP
download
① Scan the QR code on the right with your mobile phone Or Go to APP Store to download and install GloryFit,Please give this software the corresponding permis-sions,to ensure that the Bluetooth connection is normal.3
①Open the APP and add the bracelet device you want to connect in the APP. When binding, please confirm that the Bluetooth addresses displayed on the APP and the bracelet are the same. (You can check the Bluetooth address of the bracelet in the bracelet settings)②When pairing, make sure that the Bluetooth of the mobile phone is turned on, and the bracelet needs to be close to the mobile phone to connect. After the pairing is successful, you can check the connection status in the pull-down notification bar of the bracelet.04
Binding
4
05
The bracelet supports full-screen touch, slide up, slide down, slide left, slide right, long press and other operations, slide the screen to switch to view various functions; you can also click and long press the screen for related operations.The bracelet supports functions such as exercise monitoring, heart rate monitoring, and message reminder etc.Functions
introduction
5
06 ①1.App can't search the deviceAnswer: Please try to press the device button first, if the screen is not lit, you can connect the device to the charger to charge, to ensure that there is power.②The device is repeatedly connected and disconnectedAnswer: Mobile phones of different brands will automatically clean up the mobile phone background program. You need to add the APP to the mobile phone white list or self-start management.③The device cannot be chargedAnswer: Is there any dirt, corrosion, etc. in the charging place? Only the full contact between the USB interface and the charging head can charge successfully.Common
problem
6
07
The company reserves the right to modify the contents of this manual without any notice. Some functions are different in specific software versions, which is normal.①Do not wear bracelets for bathing, swimming or other water activities
② Do not expose the bracelet to a place with high moisture, high
temperature or low temperature for long time
③ Can prevent such as living room, office, laboratory, light industry studio,
storage room dust conditions, not suitable for special dust environment.
④ The bracelet has crashed and restarted. Please check the phone's memory
information to clear and try again, or quit the APP and open it again.
Maintenance
7
08 Warranty card
Description
Client information
Model
Client name
Supplier Tel
Client address
Supplier address
Date Problems Diagnosis Note
Vendor
Contact number
Purchase date （stamp）Warranty card
8
Table of contents
