LG 55EG9600 User manual

2_MPORTANTSAFETY_NSTRUCT[ONS
iMPORTANT SAFETY iNSTRUCTiONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance
of your prod uct.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFERTO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
-TO REDUCETHERISKOF FIREAND ELECTRIC
SHOCK,DO NOT EXPOSETHIS PRODUCTTO RAIN OR
MOISTURE.
_WARNING
Ifyou ignore the warning message, you may
be seriously injured or there isa possibility of
accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the
product safely. Please read the note carefully
before using the product.
WARNING:This product contains chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling,
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
* Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
* Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience

_MPORTANTSAFETY_NSTRUCT[ONS 3
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified by
the manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Keep the packing anti-moisture material or
vinyl packing out of the reach of children. Anti-
moisture material is harmful if swallowed. If
swallowed, force the patient to vomit and visit
the nearest hospital. Additionally, vinyl packing
can cause suffocation. Keep it out of the reach
of children.
CAUTION concerning the Power Cord
(Can differ by country):
Check the specification page of this owner's
manual to be certain. Do not connect too many
appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension
cords, frayed power cords, or damaged or
cracked wire insulation are dangerous. Any
of these conditions could result in electric
shock or fire. Periodically examine the cord
of your appliance, and if its appearance
indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the
cord replaced with an exact replacement part
by an authorized service. Protect the power
cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where the
cord exits the appliance. Do not move theTV
with the power cord plugged in. Do not use
a damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
cord. Do not pull on the power cord to unplug
theTV.
Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it.
Warning -To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the
TV with wet hands. Do not install this product
near flammable objects such as gasoline
or candles, or expose the TV to direct air
conditioning.
Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.

4_MPORTANTSAFETY_NSTRUCT[ONS
* Do not expose to dripping or splashing and do not
place objects filled with liquids, such asvases, cups,
etc. on or over the apparatus (e.g., on shelves above
the unit).
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possi ble electric shock (i.e., aTV with a
three-prong grounded AC plug must be connected
to a three-prong grounded AC outlet). Ifgrounding
methods are not possible, have a qualified
electrician install a separate circuit breaker. Do not
try to ground the unit by connecting it to telephone
wires, lightning rods, or gas pipes.
As long as this unit is connected to the AC wall
outlet, it isnot disconnected from the AC power
source even if the unit is turned off.
Do not attempt to modify this product in any way
without written authorization from LG Electronics.
Unauthorized modification could void the user's
authority to operate this product.
Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna isinstalled, follow the
precautions below. An outdoor antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can come in contact with such power
lines or circuits as death or serious injury can
occur. Be sure the antenna system is grounded to
provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code (NEC) in the U.S.A.provides
information with respect to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Antenr, aLead hlWke
Ground damp _NE
Equipment _ i Grourlding Conductor
Ground Clamp -- (NEC Section 81(Y21)
Power Service G_ourlding
NEC: National Electrical Code Electlode System
(NEC Art 250, Part H)
*Cleaning
When cleaning, unplug the power cord and wipe
gently with a soft cloth to prevent scratching. Do
not spray water or other liquids directly on the
TV as electric shock may occur. Do not clean with
chemicals such as alcohol, thinners, or benzene.
*Moving
Make sure the product isturned off, unplugged and
all cables have been removed. It may take 2 or more
people to carry larger TVs. Do not press or put stress
on the front panel of theTV.
* VentUation
install your TV where there isproper ventilation.
Do not install in a confined space such as a
bookcase. Do not cover the product with cloth or
other materials while plugged. Do not install in
excessively dusty places.
If you smell smoke or other odors coming from
the TV, unplug the power cord and contact an
authorized service center.
Keep the product away from direct sunlight.
Never touch this apparatus or antenna during a
thunder or lightning storm.
When mounting aTVon the wall, make sure not
to install theTV by hanging the power and signal
cables on the back of the TV.
Do not allow an impact shock or any objects to fall
into the product, and do not drop anything onto
the screen.
*DISCONNECTINGTHE DEVICE FROMTHE MAIN
POWER
The power plug is the disconnecting device. In
case of an emergency, the Power Plug must remain
readily accessible.
* Batteries
Store the accessories (battery, etc.) in a safe location
out of the reach of children.
* This apparatus use batteries. In your community
there might be regulations that require you
to dispose of these batteries properly due to
environmental considerations. Please contact
your local authorities for disposal or recycling
information.
Do not dispose of batteries in a fire.
Do not short circuit, disassemble or allow the
batteries to overheat.
Do not use high voltage electrical equipment
near the TV, (e.g., a bug zapper).This may result in
product malfunction.
*Dot Defect
The Plasma or LCD panel is a high technology
product with resolution of two million to six million
pixels. In avery few cases, you could see fine dots
on the screen while you're viewing the TV.Those

_MPORTANTSAFETY_NSTRUCT[ONS 5
dots are deactivated pJxelsand do not affect the
performance and reliability of the TV.
Generated Sound
Cracking noise A cracking noise that occurs when
watching or turning offtheTV isgenerated by
plastic thermal contraction due to temperature and
humidity.This noise iscommon for products where
thermal deformation is required.
Electrical circuit humming/panel buzzing A
low level noise isgenerated from a high-speed
switching circuit, which supplies a large amount of
current to operate a product. It varies depending
upon the product.
This generated sound does not affect the
performance and reliability of the product.
Take care not to touch the ventilation openings.
When watching the TV for a long period, the
ventilation openings may become hot.This does
not affect the performance of the prod uct or cause
defects in the product.
Do not install this product on a wall if it could be
exposed to oil or oil mist.This may damage the
product and cause it to fall.
If the TV feels cold to the touch, there may be a
small flicker when it is turned on.This is normal,
there is nothing wrong with TV. Some minute dot
defects may be visible on the screen, appearing as
tiny red, green, or blue spots. However, they have
no adverse effect on theTV's performance. Avoid
touching the LCD screen or holding your finger(s)
against it for long periods of time. Doing so may
produce some temporary distortion effects on the
screen.
Ifa fixed image displays on theTV screen for a long
period of time, it will be imprinted and become
a permanent disfigurement on the screen.This
is image burn or bum-in and not covered by the
warranty.
If the aspect ratio of theTV isset to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
Avoid displaying a fixed image on theTV screen
for a long period of time (2 or more hours for LCD,
I or more hours for the Plasma TV) to prevent
image burn.
Preventing Screen Burn
Displaying still images, such as a station's logo,
subtitle, screen menu, video game or computer
screen, for a long time may damage the screen,
causing screen burn which can remain for a
long time or never disappear. Do not display still
images for over an hour.
FCC Notice
(For USA)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCCRules.These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and the receiver.
-Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation issubject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.

6 iMPORTANT SAFETY_NSTRUCT[ONS
High power radars are allocated as primary users
of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with and/
or damage this device.This device cannot be co-
located with any other transmitter.
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RFexposure
compliance.
Industry Canada Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This device complies with RSS-210 of the Industry
Canada Rules. Operation is subject to the following
two conditions:
1. this device may not cause interference and
2. this device must accept any interference, including
interference that may cause undesired operation of
the device.
IC Radiation Exposure Statement
(For Canada)
[For having wireless function (WLAN, Bluetooth,...)]
This equipment complies with ICradiation exposure
limits set forth for an uncontrolled environment.This
equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body.
NOTE:THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO ORTV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TOTHIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITYTO OPERATE THE EQUIPMENT.
_WARNING
(For Canada)
[For product having the wireless function using
5 GHz frequency bands]
the device for operation in the band 5150-5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
the maximum antenna gain permitted for devices in
the bands 5250-5350 MHz and 5470-5725 MHz shall
comply with the EIRP limit; and
the maximum antenna gain permitted for devices in
the band 5725-5825 MHz shall comply with the EIRP
limits specified for point-to-point and non point-to-
point operation as appropriate.
High-power radars are allocated as primary users
(i.e., priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Note to Cable_V Installer
(For USA and Canada)
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the National
Electric Code (U.S.A.). The code provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of the cable entry as practical.
LG Recycling Policy
(ForUSA)
LG Electronics offers a customized e-waste takeback
and recycling service that meets local needs and
requirements in the countries where e-waste
regulations are in place, and also provides product
and packaging take-back and recycling service
voluntarily in some countries. LG Electronics evaluates
products' recyclability at the design step using
LG'srecyclability evaluation tool, with the goal of
improving recyclability where practicable. Through
these activities, LG seeks to contribute to conserving
natural resources and protecting the environment.
For more information about the LG Recycling Policy,
please visit our global site at http.//www./g.corn/
global/sustainability/environrnent/take-back-
recycling

_MPORTANTSAFETY_NSTRUCT[ONS 7
Viewing 3D Imaging
_WARNING
Viewing Time
- When watching 3D contents, take 5 to 15
minute breaks every hour.Viewing 3D contents
for a long period of time may cause headache,
dizziness, fatigue, or eye strain,
Some users may experience a seizure or other
abnormal symptoms when they are exposed
to a flashing light or particular pattern from
3D contents.
Do not watch 3D videos if you feel nausea, are
pregnant and/or have a chronic illness such
as epilepsy, cardiac disorder, or blood pressure
disease, etc.
3D Contents are not recommended for those
who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia
(weak eyesight), or astigmatism, you may have
trouble sensing depth and easily feel fatigue
due to double images. It is advised to take
frequent breaks than the average adult.
If your eyesight varies between your right and
left eye, revise your eyesight prior to watching
3D contents.
_CAUTION
Viewing Distance
- Maintain a distance of at least twice the screen
diagonal length when watching 3D contents.
If you feel discomfort in viewing 3D contents,
move further away from the TV.
Infants /Children
- Usage/Viewing 3D contents for children under
the age of S is not recommended.
- Children under the age of 10 may overreact
and become overly excited because their vision
is in development, for example, trying to touch
the screen or trying to jump into it. Special
monitoring and extra attention is required for
children watching 3D contents.
- Children have greater binocular disparity of 3D
presentations than adults because the distance
between the eyes is shorter than one of adults.
Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D
image.
Teenagers
- Teenagers may be stimulated to light coming
from 3D videos. Advise them not to watch 3D
videos for a long time when they are tired.
Elderly
- The elderly may perceive less ofa 3D effect
than the youth. Do not sit closer to the TV
than the recommended distance.
Do not watch 3D contents when you feel
fatigue from lack of sleep,overwork or
drinking.
When these symptoms are experienced, stop
using/watching 3D contents and get enough
rest until the symptom subsides.
- Consult your doctor when the symptoms
persist. Symptoms may include headache,
eyeball pain, dizziness, nausea, palpitation,
blurriness, discomfort, double image,
eyestrain, or fatigue.
Make sure to use LG 3D glasses. Otherwise,
you may not be able to view 3D videos
properly.
Do not use 3D glasses instead of your normal
glasses, sunglasses, or protective goggles.
Using modified 3D glasses may cause eye
strain or image distortion.
Do not keep your 3D glasses in extremely high
or low temperatures. It will cause deformation.
The 3D glasses are fragile and are easy to be
scratched. Always use a soft, clean piece of cloth
when wiping the lenses. Do not scratch the
lenses of the 3D glasses with sharp objects or
clean/wipe them with chemicals.

8LICENSES /OPEN SOURCE SOFTWARE NOTICE _NFORMAT[ON
LICENSES
Supported licenses may differ by model.
For more information about licenses, visit www../g.corn.
[I]DoLB H|mll
DIGITAL PLUS HIGH-_E_I_mO_MUL,IMEDV,INTERFACE
DIVX
HD _i ¸_.,_
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained inthis
product, please visit http://opensource./ge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and handling) upon email request to
opensource@/ge.com.This offer is valid for three (3) years from the date on which you purchased the
product.

TABLEOFCONTENTS9
TABLE OF CONTENTS
S
6
6
6
6
7
iMPORTANT SAFETY
iNSTRUCTiONS
- FCC Notice
- Industry Canada Statement
- IC Radiation Exposure Statement
- Note to Cable/TV Installer
- LG Recycling Policy
Viewing 3D Imaging
8 LICENSES
8 OPEN SOURCE SOFTWARE NOTICE
INFORMATION
9TABLE OF CONTENTS
10 iNSTALLATiON PROCEDURE
10 ASSEMBLING AND PREPARING
10
12
13
14
15
16
16
18
19
20
28 Connecting to an Audio System
28 - Digital Optical Audio Connection
29 Connecting Headphones
30 Connecting a USB Drive
31 MAGIC REMOTE FUNCTIONS
32 Registering Magic Remote
32 How to Use Magic Remote
32 Precautions to Take
32 USINGTHE USER GUIDE
33 SPECIFICATIONS
Unpacking
Optional Extras
Parts and Buttons
- Using the Joystick button
Lifting and Moving theTV
Setting Up theTV
- Attaching the Stand
- Mounting on a Table
- Tidying Cables
- Mounting on a Wall
21 MAKING CONNECTIONS
21 Connecting to an Antenna or Cable
22 Connecting to a HD receiver, DVD Player, or
VCR
22 - HDMI Connection
23 - DVI to HDMI Connection
24 - Component Connection
25 - Composite Connection
26 Connecting to a PC
27 - HDMI Connection or DVl to HDMI
Connection
34 MAINTENANCE
34 Cleaning Your TV
34 -Screen, Frame, Cabinet, and Stand
34 -Power Cord
34 TROUBLESHOOTING
-@ NOTE
Image shown may differ from your TV.
Your TV's OSD (On Screen Display) may differ
slightly from that shown in this manual.
The available menus and options may differ
from the input source or product model that
you are using.
New features may be added to this TV in the
future.

10 _NSTALLAT_ONPROCEDURE/ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to theTV set.
3 Connect an external device to the TV set.
4Make sure the network connection is available.
You can use theTV network functions only when the network connection is made.
* When the TV isturned on for the first time after being shipped from the factory, initialization of the TV may
take approximately one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product.The illustrations in this manual may differ from the actual product and
item.
[-i inc_ CAUTION
Do not use any unapproved items to ensure the safety and product life span.
Any damages or injuries by using unapproved items are not covered by the warranty.
ase of some model, the thin film on screen is a part of TV, So don't take it off.
_-@ NOTE
The items supplied with your product may vary depending upon the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39
inches) thick and 18 mm (0.7 inches) width.
Use an extension cable that supports USB 2.0 if the USB cable or USB FLASH DRIVE does not fit into
your TV's USB port.
Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen
may not display or a connection error may occur.
Recommended HDMI cable types (3m or less)
- High-Speed HDMIW Mcable
- High-Speed HDMI"W Mcable with Ethernet
_A_ 10 mm (0.39 inches)
_B___ 18 mm (0.7 inches)

ASSEMBLINGANDPREPARING11
Magic Remote,
Batteries (AA)
(See page 31 .)
(For 55EG9600)
Cable Holder
(See page 19.)
(For 65EG9600)
Cinema 3D Glasses
The number of 3D glasses
may differ depending upon
the model or country.
(For 55EG9600)
Stand Screws
5EA, M4 x L20
(See page 17.)
Stand Base
(See page 16, 17.)
(For 65EG9600)
Stand Screws
8EA, M4 x L20
(See page 18.)
Stand Base
(See page 17, 18.)
Component Video Cable
(See page 24.)
Composite Video Cable
(See page 24, 25.)

12 ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices work only with certain models.
The model name or design may be changed manufacturer's circumstances or policies.
AN-MR6 *_ AG-F _AN-VCS50
Magic Remote Cinema 3D Glasses Smart Camera
AG-F_DP LG Audio Device
Dual Play Glasses

ASSEMBLINGANDPREPARING13
Parts and Buttons
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick button is located below the screen of TV.
i_ NOTE
You can set the LG Logo Light to be on or off by selecting GENERAL in the main menus.

14 ASSEMBLING AND PREPARING
Using the Joystick button
You can operate the TV by pressing the button or moving the joystick left, right, up, or down.
Power On When the TV is turned off, place your finger on the joystick button,
3ress it once, and release it.
Power Off When the TV is turned on, place your finger on the joystick button,
3ress it once for a few seconds, and release it.
Volume Place your finger on the joystick button and move it left or right to
Control adjust the volume level.
Channels Place your finger on the joystick button and move it up or down to
Control adjust the channels.
-.O NOTE
Move the joystick button up, down. left. or right. Be careful not to press it. If you press it first, you
cannot adjust the volume or scroll through the channels.
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items moving the joystick button left or right.
POWER Off
SETTINGS
CLOSE
INPUTS
Turns the power off.
Accesses the quick settings.
Clears on-screen displays and returns to TV viewing.
i
iChanges the input source.

ASSEMBLING AND PREPARING 1 S
Lifting and Moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type and
size.
Avoid touching the screen at aH times, as this
may result in damage to the screen.
Do not place the product on the floor with its
front facing down without padding. Failure to
do so may resuff in damage to the screen.
It is recommended to move theTV in the box
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
power cord and aH cables.
When holding theTV, the screen should face
away from you to avoid damage.
@
• Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
Use at least two people to move a largeTV.
When transporting theTV by hand, hold the
TV as shown in the following illustration.
When handling the TV, be careful not to
damage the protruding joystick button.
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
When transporting the TV, keep theTV
upright; never turn theTV on its side or tilt
towards the left or right.
Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
Be sure to keep your TV upright instead of
laying or tilting it while moving theTV.

16 ASSEMBLINGANDPREPARING
Setting Up theTV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
Attaching the Stand
If you are not mounting theTV to a wall, use the following instructions to attach the stand.
cAuTIoN
Make sure that the screws are fastened tightly. (If they are not fastened securely enough, theTV may
tilt forward after being installed.)
• Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.
Remove the stand before installing theTV on a wall mount by performing the stand attachment in reverse.
(For 55EG9600)
,g
Brace
Stand Cover
_ CAUTION
When assembling the stand, lay the packing
brace on a table or product box and then
place theTV with its screen facing down
on the packing brace. Be sure to protect
the screen from scratches. When there is no
packing brace provided, make sure that you
place the screen on soft clothing or a cushion.
• Do not place the TV without the stand
attached into its upright position.The
protruding Joystick Button may be damaged.
Base

ASSEMBLING AND PREPARING 17
\\
5 EA
M4 x L20
CoverHolder
(For 65EG9600)
Brace
Stand Cover
F/_ CAUTION
When assembling the stand, lay the packing
brace on a table or product box and then
place the TV with its screen facing down
on the packing brace. Be sure to protect
the screen from scratches.When there is no
packing brace provided, make sure that you
place the screen on soft clothing or a cushion.
Do not place the TV without the stand
attached into its upright position.The
protruding Joystick Button may be damaged.
/
JJ
1] Insert the protruding parts of the stand cover
into the holes.
/2" Insert the cover holder of the stand cover into
the holes until it clicks.
/J" Press the stand cover gently so that the non-
woven fabric inside is attached tightly.

18 ASSEMBLINGANDPREPARING
8EA
M4xL20
Mounting on aTable
Lift and tilt theTV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
Cover Holder
5 crr 10 cm
/
Insert the protruding parts of the stand cover
into the holes.
Insert the cover holder of the stand cover into
the holes until it clicks.
Press the stand cover gently so that the non-
woven fabric inside isattached tightly.
I.J I
Ij -j
jl -_
I. -j
f.JJ
I.J I
.j J"
.jJ_
JJ
j.J"
.jJJ
j J"
2 Connect the power cord to a wall outlet.
cAuTlo.
• Do not place theTV near or on sources
of heat, as this may result in fire or other
damage

ASSEMBLINGANDPREPARING19
(Dependinguponmodel)
_o a_
1Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of theTV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of theTV.
Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable.
Make sure to keep the rope parallel to the flat
surface.
[_ CAUTION
Make sure that children do not climb on or J
hang on theTV.
Tidying Cables
Gather and bind the cables with the cable holder.
Cable Holder
,/_'_CAUTION
Do not move theTV by holding the cable
holder and cable management, as the cable
holders may break, and injuries and damage
to theTV may occur.
Ii NOTE
Use a platform or cabinet that is strong and
large enough to support theTV securely.
Brackets, bolts, and ropes are optional. You
can obtain additional accessories from your
local dealer.

20 ASSEMBLING AND PREPARING
Mounting on a Wall
An optional wall mount can be used with your LG
television. Consult with your local dealer for a wall
mount that supports the standard used byyourTV
model. Carefully attach the wall mount bracket at
the rear of the TV. Install the wall mount bracket
on a solid wall perpendicular to the floor. If you are
attaching theTV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included with
the wall mount. We recommend that you use an LG
brand wall mount. When you do not use LG's wall
mount bracket, use a wall mount bracket where
the device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
_-_ CAUTION
*Disconnect the power first, and then move or
install theTV. Otherwise electric shock may
occur.
If you install theTV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
theVESA standard. Any damages or injuries
by misuse or using an improper accessory are
not covered by the warranty.
Make sure to use screws and wall mounts that meet
theVESA standard. Standard dimensions for the
wall mount kits are described in the following table.
Model
VESA
(AxBxC)
Standard
screw
Number of
screws
Wall mount
bracket
i(optionai_
55EG9600 65EG9600
200 x 339.7 x195.3 200 x 330 x120
M6 M6
4 4
OTW150 OTW150
_--@ NOTE
*Use the screws that are listed on theVESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional.You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending upon
the wall mount. Make sure to use the proper
length.
o For more information, refer to the manual
supplied with the wall mount.