li'l pengyu PTC-180 User manual

If you don't know how to install the product, need more information, or received
defective products, please feel free to contact us: [email protected]
1 - All accessories, other hardware, and plastic parts of the playpen should be inspected regularly to
ensure that they are properly fixed and without damage or failure.
2 - Waving belt and fabric items should be checked regularly and sutured to ensure correct fixation without
loosening, breaking or other damage.
Keeping clean:
1 - Let the fabric dry completely before using this product.
2 - The frame should always be kept clean without dirt and foreign matter.
3 - If necessary, clean these parts with a sponge or cloth dipped in warm water and mild detergent.
Customer Support
Thank you for choosing our products! We really appreciate your trust and hope you'll
be satisfied with your order. Please feel free to contact us at any time or leave a review
– your feedback and support will help us create even better products in the future! PTC-180
Failure to follow these warnings and instructions may lead to serious injury or death.
Be sure to fully install the product, including side rails, before use.
Never place items with a string, such as hood drawstrings or pacifier cords, around a baby's
neck. Never suspend strings over the product or attach strings to toys.
Stop using the product when the baby can climb out or reach 35 in height (890 mm).
When covering the top of the product with other objects, the baby may be trapped and hurt;
never add such items to restrict the baby in the product.
When the baby can pull to the standing position, remove bumper pads, large toys and other
objects that can be used as climbing steps.
Never place the product near a window where cords from blinds or drapes can strangle a
child.
Always provide the necessary supervision for the continued safety of the baby. Do not let the
baby use the product without supervision.
To reduce the risk of SIDS, pediatricians recommend that healthy infants be placed on their
back to sleep, unless otherwise advised by your physician.
Regularly check the product before assembly and usage. If there are any loose or missing
fasteners, loose connectors/tees, broken parts, or torn mesh/fabric, do not use this product
and contact the seller to replace the parts.
Scope of usage: indoor; suitable for wood floors, tiles and hard floors.

Paying attention to the Paying attention to the
sequence of installation will sequence of installation will
make this process easier.make this process easier.
Paying attention to the
sequence of installation will
make this process easier.
Model: PTC-180
Product size: 70.87"*59.06"*26.18"
Package size: 35.43"*9.05"*7.87"
Product weight: 17.4 lb
Material: High density oxford cloth, alloy steel tube, poly propylene material
Package content:1*oxford mesh+ 1*por table storage bag + 1*user manual
+4*suction tees+4*tees+8*straight tees+4*pull rings+ 24*alloy steel tubes.
Product Information
List of accessories in the box
(A) Length tube x 8
8
8
8
4
4
(B) Width tube x
(C) Height tube x
Tee x
875mm/35.8"
725 27 6"mm/ .
620mm/24.4"
Suction tee x
Straight tee x
The Baby Playpen product is suitable for babies within 24 months of age
when learning to crawl or play. This product can be placed in the living
room, bedroom, playroom, etc. With this product, you can create a safe and
comfortable space for the baby, allowing freedom of movement while
providing a full range of protection.
Product Introduction
Storage bag Oxford mesh 4 Pull rings
12
3
4
Undo all zippers before installation and
install the bottom tudes (A&B) by
linking them through the oxford mesh
and suction/ straight tees.
The top tubes (A&B)
should be installed
clockwise or counter
clockwise, starting
from the grid that is
next to the zipper/gate.
Lastly, install the horizontal
tube (B) above the zipper/gate.
Rotation of the tees will
make the installation
easier.
Install the vertical tubes ( C ) and
ensure connection with the bottom tees.