LIBERTY AV SOLUTIONS novisign Novitizer User manual
Rev 200504 Phone: 719-260-0061
Toll-Free: 800-530-8998
Fax: 719-260-0075
Novizer Digital Signage Kiosk
Install Guide
11675 Ridgeline Drive
Colorado Springs, CO
80921
Novizer Install Guide
2
Important Safety Instrucons
»Please completely read and verify you understand all instrucons in this manual before operang this equipment.
»Keep these instrucons in a safe, accessible place for future reference.
»Heed all warnings.
»Follow all instrucons.
»Do not use this apparatus near water.
»Clean only with a dry cloth.
»Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers)
that produce heat.
»Use only accessories specied or recommended by Intelix.
»Explanaon of graphical symbols:
◊ Lightning bolt/ash symbol: the lightning bolt/ash and arrowhead within an equilateral triangle
symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product enclosure which may be of sucient magnitude to constute a risk of shock to a person or
persons.
◊ Exclamaon point symbol: the exclamaon point within an equilateral triangle symbol is intended
to alert the user to the presence of important operang and maintenance (servicing) instrucons
in the literature accompanying the product.
»WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
»Use the mains plug to disconnect the apparatus from the mains.
»THE MAINS PLUG OF THE POWER CORD MUST REMAIN READILY ACCESSIBLE.
»Do not defeat the safety purpose polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of
your obsolete outlet. Cauon! To reduce the risk of electrical shock, grounding of the center pin of this plug must be
maintained.
»Protect the power cord from being walked on or pinched parcularly at the plugs, convenience receptacles, and the
point where they exit from the apparatus.
»Do not block the air venlaon openings. Only mount the equipment per Intelix’s instrucons.
»Use only with the cart, stand, table, or rack specied by Intelix or sold with the equipment. When/if a
cart is used, use cauon when moving the cart/equipment combinaon to avoid injury from p-over.
»Unplug this apparatus during lightning storms or when unused for long periods of me.
»Cauon! Shock Hazard. Do not open the unit.
»Refer to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Novizer Install Guide
3
Installaon Instrucons
Mounng
Fill the Hand Sanizer Tank
The Novizer can be mounted onto a wall or by using a stand, not included. If you need a stand please contact
Liberty AV Soluons for the NOVI-STD stand for the Novizer.
The Novizer comes with two keys to lock and unlock the kiosk system. Use one of the supplied keys to unlock
the unit, then li the white casing UP to access the tank dispenser.
The unit unlocks and opens up underneath near the sanizer dispenser as seen below.
Novizer Install Guide
4
Remove the dispenser tank from inside the kiosk, there are no cords or electronics aached to the tank so you
can remove in one piece with one tug. Unscrew the nozzle from the tank, then rell the tank with any liquid, gel
or foam sanizer. Reaach the nozzle to the tank then place the tank and nozzle assembly back into the kiosk.
Close the white panel casing and lock with the key.
A pic below shows the tank and nozzle assembly inside the kiosk.
Novizer Install Guide
5
Connect Keyboard and Mouse
To navigate the Android operang system of the Novizer kiosk, connect a wired or wireless keyboard and
mouse to the USB connecon to the right side of the kiosk as seen below.
Connect the aached power cord to a power outlet, the device will automacally turn on. If the unit does not
turn on use the supplied remote control to turn the unit on by holding down the POWER buon.
Apply Power
Novizer Install Guide
6
The Novisign Digital Signage Player APP has been pre-installed for convenience on the Novizer kiosk. Below are
the instrucons for using the Player APP.
NOTE: A Novisign 12 month digital signage cloud license is included in the purchase of a Novizer. Login to the
Novisign cloud content management service online at www.novisign.com with your user name and password to
create digital signage content for the Novizer. Use a 9:16 template for the aspect rao for the content to play
in portrait mode on the Novizer kiosk.
When the Novizer powers ON, content from the Novisign APP player maybe in test / demo mode. To access
the Android desktop, right click your mouse as right click in the Android OS is to ‘go back one step’. To connect
the kiosk to the Internet either use an Ethernet cable to connect the kiosk physically to a LAN on the right side
of the kiosk or connect the device to WiFi. Click on SETTINGS on the Android desktop to login to the WiFi SSID
of your choice in your area.
NOTE: If using the WiFi opon be sure the included WiFi antenna is connected to the top of the kiosk.
Novisign Digital Signage Player APP
Novizer Install Guide
7
Once the Novizer is online, click on the APPLICATIONS icon boom le of the desktop.
Novizer Install Guide
8
Navigate to and click on the Novisign Player APP in the applicaons folder
Novizer Install Guide
9
Login to the player APP with your Novisign user name and password at the top right of the APP
Novizer Install Guide
10
Once logged in, choose the digital signage content you would like to display on the kiosk screen by clicking the
open eld to show available screens in your license
You can choose to have the APP play automacally on device startup, simply check the box below the screen
eld for this opon. This is a best pracce to use this opon in case the device is rebooted by accident. To
disengage the auto play opon, simply connect a wireless USB mouse to the device and right click the mouse to
access the APP opon or click once more for the desktop.
Click GO. Your digital signage content will now play.
Thank you for your purchase.
For Technical Support please call our toll free
number at 800-530-8998 or email us at supportli-
bav@libav.com
www.libav.com
Digitalinx is a brand of:
Table of contents
