LIBERTYVILLE LED-1914 User manual

STEP 5
STEP 3STEP 2
STEP 4
LIBERTYVILLE LED-1914
6/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
CUSTOMER INSTALLATION INSTRUCTIONS
EXISTING VIEW STEP 1
Take ring out.
Take pin out.
DRIVER ASSY.
3L OR 1L
Unpack the COB conversion kit.
Handle with care. Do not touch the
optics. Recycle the empty packaging.
Open door assy (min 90º)Take door assy out.
Be careful handling
acorn, so it does not
fall.
Unscrew ring.

LIBERTYVILLE LED-1914
6/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
CUSTOMER INSTALLATION INSTRUCTIONS
STEP 8 STEP 9
STEP 10 STEP 11
STEP 6 STEP 7
Install ring.
Take out the gasket.
Take out the optic and lens. Reinstall existing
gasket to lens.
Complete door using
existing screws.
Open roof assembly. Remove the
HID ballast assy.
Install the driver assembly into
the roof. Complete the wiring.

LIBERTYVILLE LED-1914
6/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
CUSTOMER INSTALLATION INSTRUCTIONS
STEP 14 STEP 15
STEP 16 STEP 17
STEP 12 STEP 13
Apply new gasket. Assemble door assy
with fixture housing.
Install the ring-pin. Close the door assy.
Close the roof
assembly with
housing.
Install the COB module assembly aligning the optics
toward streetside. Complete the wiring. Connect DC
output of driver to wires on COB module using lever
nuts supplied. Red to red. Black to black.

LIBERTYVILLE LED-1914
6/18 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
CUSTOMER INSTALLATION INSTRUCTIONS
FINAL VIEW