Liesegang dv475 User manual

Bedienungsanleitung
User Manual
dv475
Liesegang Unternehmensgruppe

Table of contents
Before use 2
1. Scope of Delivery 7
1.1 Disposal of packing material 7
2. Parts Name of the Projector 8
3. Quick Setting Up 9
3.1 Setting up and connecting the projector 9
3.2 Projection distance and image size 9
4. Connections 10
4.1 Connecting a computer or a notebook pc 10
4.2 Connecting video equipments 10
5. Starting Up the Projector 12
5.1 First Steps 12
5.2 Adjustment 13
5.3 Standby mode 14
5.4 Projector power down 14
6. Using System Menus 15
6.1 On-Screen menu 15
6.2 List of functions 15
7. Infrared Remote Control 18
7.1 How to use the infrared remote control 18
7.2 General function keys 18
7.3 Mouse keys 18
7.4 Hot keys 18
7.5 Battery replacement 19
8. Cleaning and Replacing the Air Filter 19
9. Replacing Projection Lamp 20
10. Lamp counter 20
11. Troubleshooting Problems and Solutions 21
12. Resetting the Projector to Factory Default Settings 21
13. FCC Compliance Statement for United States Users 21
14. Service Hotline 22
15. Product Manufacturer 22
16. Glossary of Terms 23
17. Specifications 24
17.1 Optical 24
17.2 Electrical 24
17.3 Mechanical 24
18. Warranty terms 25

Before use
User Manual Data Video Projector 2
Before use – Please read the user manual
The following notes are intended to be a help for handling the product in accordance
with its designated purpose.
Attention:
A person could be killed or injured if the wrong operation is done by ignoring this indication.
__________________________________________________________________
Do not install this unit
in an unstable place.
Avoid placing it in an unstable place such as a weak base, an inclined floor, etc. This may cause the
projector to drop or fall over, resulting in injury.
Do not remodel
this unit.
Do not remodel this unit. It may cause a fire, an electric shock, etc.
Never use
the projector in a humid
environment.
Never use the projector in a humid environment, e.g. bathroom or close to cookers or humidifiers. This
could cause a fire, an electric shock, etc.
Only connect
to the specified mains voltage.
The projector must only be operated with the alternating current specified on the identification plate.
Please immediately check whether the supplied mains connection cable coincides with wall outlets at
the installation location.
Do not forget
the protective conductors.
Only use extension leads or cables with a minimum cross-section of 1.5 mm² and protective conduc-
tors.
Do not apply any shock.
If you drop this unit or if the casing is broken, turn off the power switch, disconnect the power plug and
contact your dealer. If you use it as it is, it may cause a fire, an electric shock, etc.

Before use
3 Data Video Projector User Manual
If any abnormality occurs.
It there is abnormal smell or smoke, if you use this unit as it is, this could cause a fire or an electric
shock, etc. Immediately turn off the power switch and pull out the power plug. Contact your dealer to
repair the unit. Do not repair it yourself, as it is very dangerous.
Do not use this unit as it is after trouble has occurred. Immediately turn off the power switch and pull
out the power plug, then contact your dealer to have it repaired.
If water, etc., enters the unit, turn it off, pull out the power plug and contact your dealer to have it re-
paired.
Be careful with the power cord.
Do not scratch, damage or modify the power cord. Do not bend it forcibly. Also do not put a heavy
object on it, do not heat it and do not pull it. If you do, the power cord may be damaged and it may
cause fire, electric shock, etc.
If the power cord is damaged (exposed or disconnected wire, etc.), replace it. It may otherwise cause
a fire, an electric shock, etc.
Make sure that no dirt adheres to the power plug and insert it until it stops. If dirt adheres or the con-
nection is incomplete it may cause a fire, an electric shock, etc.
Do not look directly into the lens
when the lamp is switched on.
Do not look directly into the lens when the lamp is switched on. Since a powerful lamp is used, it could
damage your vision, etc.
Do not put a container, etc,
with liquid on this unit.
Do not put a vase, flower pot, cosmetic container, medicine or water on this unit. If liquid spills and
enters the unit, it may cause fire, electric shock, etc.
Never leave the projector
switched on unsupervised.
Never leave the projector switched on unsupervised or let children play with it as unusual conditions
may occur which can cause a fire, an electric shock, etc.

Before use
User Manual Data Video Projector 4
Caution !
Non-observance can lead to injury or damage.
___________________________________________________________________
Caution
when carrying the unit.
When the unit is to be moved, be sure to disconnect the power plug and check that all external con-
nection cords are removed before moving it. If not, the cord may be damaged and it may cause a fire,
an electric shock, etc.
Do not place this unit
where it gets hot.
Be careful if you place the unit outdoors, in a place exposed to direct sunlight or near a heating device,
the casing and parts could be affected.
Cleaning the projector.
Handle the projector as you would do any other device with glass components. Avoid impact or drop-
ping. Before cleaning the device disconnect the mains plug.
The casing can be cleaned with a soft, slightly moistened cloth and mild detergent. Avoid the ingress
of moisture into the inside of the equipment. Never use solvents or abrasive cleaners. Do not leave
cleaners inside the projector.
Handle the power cord carefully.
Do not bring the power cord near a heating device. The cord’s shield may melt and it may cause a fire,
an electric shock, etc.
Do not insert / disconnect the power plug with wet hands. It may cause an electric shock.
Do not pull the power cord when the power plug is to be disconnected. The power cord may be dam-
aged and it may cause a fire, an electric shock, etc. Be sure to seize the power plug.
Do not step on this unit.
Do not put a heavy object on it.
Do not step on this unit or put a heavy object on it. Pay attention when children are present. If you do,
the unit may fall over or may be broken causing an injury.
Never block
the ventilation slots.
Never block the openings for the ventilation or place objects in the projector. Heat may accumulate in
side the projector and it may catch fire.

Before use
5 Data Video Projector User Manual
Temperature between 5°C and 35°C.
Do not use the unit while the temperature is high or varies greatly. The unit must be used at between
5°C (41°F) and 35°C (95°F).
Set the caster stoppers.
When this unit is installed on a table with casters, set the caster stoppers. If the table moves, it may
fall over, causing an injury.
If you do not use
the unit for a long time.
If you do not use the unit for an extended period of time, be sure to pull out the power plug from the
power outlet.
Replacing the lamp.
Switch off the projector and disconnect the mains plug before replacing the lamp. Let the device cool
down, as the lamp and other components in the projector casing have heated up during operation,
which can cause injury when touched.
Do not place this unit
in a moist or dusty place.
Do not place this unit in a moist or dusty place. It may cause a fire, an electric shock, etc. Do not place
this unit where it would be exposed to soot or steam, near a cooking stove or humidifier, etc. It may
cause a fire, an electric shock, etc.
Volume.
Use a volume level that does not bother persons in the neighborhood. Especially, since the sound is
likely to carry well at nighttime even at a low volume, be careful to choose a suitable level.
Clean the projector inside
at least once a year!
Ask your dealer to clean the unit inside once a year. If the unit is left with too much dust inside it may
cause fire.
Use of batteries.
Do not use batteries not specified for this unit. Do not use new batteries mixed with old ones. This may
cause a fire, injury due to burst of battery, liquid leakage.

Before use
User Manual Data Video Projector 6
When inserting batteries in this unit, pay attention to the direction of the + and - polarities and insert
the batteries correctly. If the polarities are confused, it may cause injury or damage near the unit due
to burst batteries, liquid leakage, etc.

Scope of Delivery / Disposal of Packing Material
7 Data Video Projector User Manual
1. Scope of Delivery
Your projector should come with the items shown below. Check to make sure that all the
items are included. Contact your dealer if anything is missing.
Following accessories available:
Spare lamp kit Order-No.: ZU 0201044010
Air filter Order-No.: EK 0201011150
USB mouse cable Order-No.: ZU 0260700008
Soft-Case Order-No.: ZU 0201980010
Ceiling mount kit Order-No.: ZU 0201750009
In case of extreme operating conditions:
In case of extreme operating conditions – examples: >8-hour-operation, severe vibra-
tions, great temperature fluctuations, heavy nicotine or other aggressive smoke, heights
exceeding 3000 m – please contact your dealer. We recommend that you conclude a
maintenance contract.
Important note:
The projector features its own electronic multi-range power supply with automatic switch-
ing. It must only be operated with 100 V - 240 V AC with a frequency of 50 Hz to 60 Hz.
The unit must only be connected to a
properly installed network with protective conduc-
tor. Please check immediately whether the supplied mains cable is compatible with the
mains sockets on-site. Please contact your supplier if a different power supply cable is
required for use abroad.
1.1 Disposal of Packing Material
The transport packing consist only of materials which may be disposed.
Remark:
The transport packing offers perfect protection for the product and should be kept for fur-
ther transport etc.
Projector
Remote control
AAA battery (2x)
+
Bedienungsanleitung
User Manual
R
FREEZE
VOLUME ZOOM
L
AUTO
MUDE
LASER
ENTER
POWER
ESC
SOURCE MENU
U
D
LR

Parts Name of the Projector
User Manual Data Video Projector 8
2 Parts Name of the Projector
Front, side and top
Bottom and rear side
Lens
Lens Cover
Exhaust Vents
Adjuster Leg Main Power Switch
Power Input Socket (AC IN)
Handle
Remote
Sensor
( Front )
Speaker
Focus Ring
Zoom Ring
Control Panel and Indicators
Power
Source
Keystone
Auto
Menu
Esc
Volume
Lamp Temp
Enter
Adjuster Legs
A
ir Filter
Lamp Cover
Remote Sensor
( Rear )
Cooling Fans and Ventilation Slot
Connector Panel
Video
S-Video
Audio
Y
Cb/Pb
Cr/Pr
DVI-D
RGB out
Rs232 USB RGB in 2
RGB in 1

Quick Setting Up
9 Data Video Projector User Manual
3. Quick Setting Up
3.1 Setting up and connecting the projector
These instructions are intended to get you going fast.
To avoid damage to the equipment, all power to projector and input sources
must be turned off during cable hook up.
It is imperative that you ensure that the device is inclined in the direction of the
projection at an angle not exceeding +30°. In all other directions, the projector can be
tilted at around ±5°. Please keep these values in order to avoid damage to the device.
1. Place the projector on a rigid, non-slip surface.
2. Connect the power cord.
3. Connect the audio and computer/video input cables to the projector input terminals.
4. For mouse emulation, connect the mouse and, in case of PS/2 and USB, the appro-
priate adapter.
5. Power up the projector then the computer and the video sources.
6. Move the projector nearer or further away from the screen to obtain the best image
size or adjust the image size with the Zoom buttons of the remote control.
3.2 Projection distance and image size
The distance from projector lens to the screen will determine the size of the projected im-
age. The maximum image size is about 8 – 10m diagonally at a distance of 15 meter.
Please refer to the table below for the image size projected. For further information about
image size calculator please have a look on our website: www.Liesegang.com.
„Wide“ and „Tele“ means the maximum and minimum image size diagonally at the same
distance by adjusting lens to zoom.
Projection
Distance (L=m)
D
L