Lightdow LD-V3 User manual

Action Camera
170
4K 30m
Wide Angle WIFI UItra HD Waterproof HDMI

Warning
1,Keep it safe from falling and dropping
2,Keep it distance from any strong magnetic interference objects
like electrical machine to avoid strong radio waves that might be
damaging the product and affect the sound or image quality.
3,Don’t expose the product directly to high temperatures and strong
sunlight
4,We recommend using high quality Micro SD Card for the best
results.
5,Don’t place your Micro SD card near strong magnetic objects to
avoid data error.
6,In case of overheating, unwanted smoke or unpleasant smell from
the device, unplug it immediately from the power outlet to prevent
hazardous fire.
7,Keep it safety from children while on charging.

8,Stored the device in a cool, dry and dust free location.
Product features
With a water proof casing, allowing you to film 30 meters
under water scene.
HD screen display for convenient videos and image playback
Detachable battery for easy replacement and help extend
product lifespan
Record videos while charging
HD 16 Megapixel wide angle lens
HDMI Output
Web Camera
Supports SD card memory expandable up to 64GB
(Maximum)
Supports multiple video recording formats:
4K/2K/1080P/720P/ WVGA

Accessories combination schemes

GETTING STARTED
T o power ON:
Press the Power/Mode Button.
To power OFF:
Press and hold the Power/Mode Button.
OVERVIEW
Turn camera ON and repeatedly press the Power/Mode Button to
cycle through camera modes and settings.The modes will appear in
following order:

Video Record Video
Photo Capture a single photo
Time-lapse Time-lapse video
Play back playback Video and photo
Settings Adjust camera settings
SETTINGS

Photo
Pixel set 16M/12M/8M /5M/2M
Timed 3S/5S/10S/20S/OFF
Auto 3S/10S/15S/20S/30S/OFF
Drama shot 3P/S、5P/S、10P/S、20P/S、OFF
Exposure -2---+2
White balance Auto/Sunny/Cloudy/Incandescent
light/Fluorescent light
Image Rotation ON/OFF
WIFI ON/OFF
Light source
frequency
Auto/50HZ/60HZ

Video mode
1,To record video,Verify the camera is in Video mode.
2,If the Video icon” ”on screen is showing, press the OK key to
start video, at the same time also has “a red icon” flashing.
3,Click the OK button again to stop the video, also the red icon
disappear.
Picture mode
1,To take picture,Verify the camera is in picture mode.
2, If the picture icon ””on screen is showing, press the OK key
to take pictures.
Slow motion
1,To record slow motion video,Verify the camera is in slow motion
mode.
2, If the slow motion Video icon” ”on screen is showing,
press the OK key to start video, at the same time also has “a red

icon” flashing.
Time-lapse
1,Enter the setting menu, open this function, return to video mode.
2, If the slow motion Video icon” ”on screen is showing, press
the OK key to start video, at the same time also has “a red icon”.
Playback
Playing back video and photos
1,verify the camera is in playback menu
2,press up or down button to select file,press OK button to playback
video
Battery
1, install and remove the battery
a. down upon battery cover can be open it.
b. according to the battery label plus or minus sign and the direction
of the arrow, right put the battery into the camera, until the

installation in position.
c. take out battery, push away the battery cover can take out the
battery
2, charge
a. connect the computer or the power adapter can be recharged.
b. directly to the car charger can be recharged in the c a r.
c. can charge while video function.(inside the function table Settings
required to open the car mode)
d. power off can be charged.
CAMERA WIFI APP
1,Download the APP client and install it to the smart phone, which
displays the “XDV” application icon after installation. Apple WLAN,
direct search “XDV”, click install. After the installation of the mobile
phone interface will appear a APP application icon. Click to enter the

APP "XDV" interface .
2,The open WIFI function
a. Select the "WIFI" menu, press "OK" button to enter, select "open",
the screen will show the WIFI icon, SSID:********,
PWA2:********.
b. click the UP button to return. At this time to open the phone to
set the WIFI function, to find a new set of WIFI name of the
network,
c. The connection after entering the new WIFI password and
confirm the connection, the connection after the success of the LCD
on the Connected/ display MAC:************.
d. At this time to open the phone has been installed “XDV” APP
client, and search to add the camera ID code, after the completion
of the camera and video operations can be performed.

MP4

compression
format
H.264
Photo 16M/14M/12M/8M/5M
Memory Micro SD UP TO 64GB
Picture mode Single/timer /（2S/5S/10S）/ Continuous
shot
Light source
frequency
50Hz/60Hz
USB USB2.0
Power 5V 1A
Battery 900MAH
Video time 1080P/ 90min
Charge time About 3 hours
System Windows XP/VistaorAbove/Win7/Mac os