Lightolier T-BAR RUNNER MOUNTING CLIPS Instructions for use

I
fY
READ AND UNDERSTANDTHESEINSTRUCTIONSBEFOREINSTALLINGFIXTURE INSTRUCTION SHEET NO,
This fixture is intendedfor installationin accordancewith the National ElectricalCode and local
regulations.Toassurefullcompliancewithlocalcodesandregulations,checkwithyourlocalelectrical
inspector before installation. To prevent electrical shock, turnoff electricity at fuse box before proceeding. IS:6087
Retain these instructions for maintenance reference. R0493 Page 1of 1
T-BAR RUNNER MOUNTING CLIPS
FOR USE WITH BASIC OR ADVENT LYTESPAN” TRACK SYSTEM ONLY
15/16”OR9/16”ATFACE OFT-BARRUNNER
SQUARE EDGE REGRESSED
CEILING PANEL EDGECEILING PANEL
3“” L
‘Iv
6089
!MOUNTINGCLIP
Ifi ~6087
TRACKUNIT MOUNTINGCLIP
TRACKUNIT
SQUAREEDGEPANEL REGRESSED EDGE PANEL
NOTE: Track can be positioned at any angle relative of the T-BAR.
1. Use2MOUNTlNG CLlPSfor2’and 4’track units. Use3MOUNTlNG CLlPSfor8’track unit.
2. Rotate MOUNTING CLIP onto T-BAR, See Fig, 1,
3. Rotate the white portionof the MOUNTING CLIP to initial positionand rotate intoTrack Unit. See Fig. 2.
T-BAR INITIAL POSITION
ROTATE CLIP
CLOCKWISE
WHITE PORTION
OF CLIP
FIG. 1
—CLIP FOR
4OUTLET BOX
OPENING
NOTE: (4)CLIPS ARE ONLY USED
ON OUTLET BOX FOR GRID
CEILING CANOPY KIT 6096WH
WHEN NECESSARY
FIG. 2
1-M <5 l-m-c>1-1E R“
ERWR<!RK:ZR