
/
Certec® 3in1 30 L / 100 L / 200 L
ALLGEMEINE INFORMATIONEN
Lesen Sie die gesamte Gebrauchsanleitung bitte sorgfältig durch.
INHALT:
• 1x LILIE Certec® 3in1-Kapsel (30L / 100L / 200L je nach Ausführung)
• Gebrauchsanleitung
• 1x Nylonschnur mit Kontrollplakette
ZUSAMMENSETZUNG
• Gehäuse: LM T101 (Polypropylen)
• Innenmaterial: Certec® 3in1-Keramik-Röhre und Bioelektro-Depot
MÖGLICHE ANWENDUNGSBEREICHE
Frischwassertank, Wasserkanister, Aquarium, Wasserspender.
SICHERHEITSHINWEISE
• Nicht geeignet für Kinder unter 3 Jahren (Kleinteile können verschluckt werden).
ACHTUNG: Die Kapsel nicht önen. Beim Önen der Kapsel kann die Lebensmittelechtheit nicht
mehr gewährleistet werden.
ACHTUNG: Nicht im Wasserkocher verwenden.
Bitte beachten Sie die max. Einsatztemperatur von 100° C.
HALTBARKEIT UND LAGERUNG
Mindestens haltbar bis: 30.04.2022 (ungeönet in Originalverpackung und bei normalem Raumklima). Lagern
Sie Certec® 3in1 nicht zusammen mit starken Oxidationsmitteln, Säuren, Laugen, Halogenen, Halogenverbin-
dungen oder konzentrierter Wasserstoperoxid-Lösung.
REINIGUNG UND ENTSORGUNG
Bei ausschließlicher Verwendung mit Frischwasser prinzipiell nicht empfohlen. Sollte die Kapsel in Behältern
benutzt werden, in welchen kein Trinkwasser verwendet wird (z.B. Aquarium mit Algen), kann die Oberfläche
der Keramik zum Aufrechterhalten der Wirkung gereinigt werden (abschrubben). Die Kapsel kann dazu geönet
werden (nur bei Anwendung ohne Trinkwasser wegen Sterilität).
Certec® 3in1 kann mit dem normalen Hausmüll entsorgt werden.
WIRKUNGSWEISE Certec® 3in1
Certec® 3in1 ist ein Konservierungsprodukt mit Vorbeugewirkung.
Es schützt Trinkwasser vor Verkeimung und hemmt die Biolmbildung in Frischwassersystemen.
Das Bioelektro-Depot sorgt dafür, dass Negativionen und Bioelektrizität selbstregulierend abgegeben
werden – und das bei jeder neuen Tankfüllung automatisch. Diese Negativonen heften sich an die Keime
im Wasser. Der Stowechsel wird somit gehemmt, die DNA-Neubildung wird gestört und die Zellmembran
geschädigt. Anstatt eine Kolonie zu bilden und sich zu vermehren, verhungern die Keime. Die mikrospko-
pische Labyrinthstruktur der Certec
®
3in1-Keramik gleicht einer eektiven Oberfläche von ca. 1050 m².
Da Bakterien zur Koloniebildung chemischen und elektrischen Signalen folgen und die größte besiedelbare
Oberfläche bevorzugen, wirkt die Keramik als Attraktor. Es entsteht dadurch ein Anziehungseekt, der durch
die Negativionen und Bioelektrizität zusätzlich verstärkt wird. In der Tiefenstruktur werden inaktivierte Bakte-
rien permanent festgehalten und durch die scharfen Kanten der Keramik zusätzlich neutralisiert.
GEBRAUCH
Bevor Sie die Certec
®
3in1 30/100/200L Kapsel in Gebrauch nehmen, reinigen und desinzieren Sie den Behälter, in
dem die Kapsel angewendet werden soll, gründlich. Befestigen Sie ggf. die Nylonschnur an der dafür vorgesehenen
Öse der Kapsel. Vermerken Sie auf dem Textfeld des Etiketts das Datum des Anwendungsbeginns mit einem wasser-
festen Stift (z.B. Folienschreiber, Permanentmarker) und kleben es an das Ende der Nylonschnur (Erklärung auf S. 2).
Lassen Sie dann die Kapsel ins Wasser sinken (die Seite mit den Atmungslöchern voraus). Wenn die Kapsel senkrecht
im Wasser treibt (Ösenkappe dabei etwa ca. 1 cm über der Oberfläche), ist ein optimales Schwimmverhalten ge-
währleistet. Sollte dies auf Anhieb nicht der Fall sein, kann dies durch Anstupsen, Drehen oder erneutes ins Wasser
sinken lassen erreicht werden.
Stellen Sie dann sicher, dass das Etikett-Ende der Nylonschnur aus dem Behälter hängt. Klemmen Sie es hierzu
z.B. zwischen den Tankdeckel und Verschraubung. Stellen Sie dabei immer sicher, dass die Kapsel genug Spiel-
raum hat und bis zum Behälterboden sinken kann, wenn dieser leer ist. Der Tank kann regelmäßig neu befüllt
werden. Stellen Sie jedoch sicher, dass die Kapsel immer an der Oberfläche schwimmt.
Hinweis: Wasserbewegung (Fluidisierung) ist wichtig für einen optimalen Ionisierung Ihres Frischwassersy-
stems. Z.B. wird beim Fahren oder Befüllen das Wasser im Tank bewegt und die Negativionen verteilen sich
im Frischwassersystem. Stellen Sie sicher, dass das Wasser in Ihrem Tank/Behälter regelmäßig bewegt wird.
VORSICHT!
Idealerweise ist die Certec® 3in1 Kapsel während der gesamten Einsatzzeit von Wasser umgeben. Sollte die
Kapsel länger als 1, max. 2 Wochen in einem leeren Behälter gelagert werden, verfällt die Wirkung.
Sollten Sie Ihren Wasserbehälter folglich für einen längeren Zeitraum leer stehen lassen, stellen Sie sicher,
dass die Kapsel in einem anderen, gefüllten Wasserbehälter (z.B. Wasserflasche) zwischengelagert wird.
Alternativ kann die Kapsel auch trocken geföhnt, und danach in dem mitgelieferten Druckverschluss Beutel
aufbewahrt werden.
VORSICHT!
Bereits verschmutztes oder verkeimtes Wasser kann durch Certec® 3in1 nicht nachträglich gereinigt werden.
Sollte die Kapsel vor dem Einsatz im Frischwasser durch unsachgemäßen Gebrauch (z.B. in Brauchwasser*)
oder durch unsachgemäße Lagerung verschmutzt sein, darf sie aus Hygienegründen nicht mehr eingesetzt
werden
*Mit Brauchwasser bezeichnen wir Wasser, das im Allgemeinen nicht zum Verzehr verwendet bzw. geeignet ist. Zur Befüllung muss
Trinkwasser verwendet werden.
DOSIERUNG
Eine Über- oder Unterdosierung ist ausgeschlossen. Negativionen und Bioelektrizität werden selbstregulie-
rend abgegeben. Wirkungszeitraum: 12 Monate ab Erstwasserkontakt.
Certec® 3in1 30L Certec® 3in1 100L Certec®3in1 200L
Behälter bis 30 Liter Kapazität Behälter bis 100 Liter Kapazität Behälter bis 200 Liter Kapazität
Konservierungsleistung bis
zu 9.000 L
Konservierungsleistung bis
zu 30.000 L
Konservierungsleistung bis
zu 70.000 L
FRAGEN ZU Certec® 3in1
Sollten Sie weitere Fragen zu der ungsweise oder den Anwendungsbereichen von Certec® 3in1 haben,
besuchen Sie unsere Infoseiten unter www.certec-lter.de.
BAUA: N-75579
Biozidprodukte vorsichtig verwenden. Vor Gebrauch stets Etikett und Produktinformationen lesen.
GENERAL INFORMATION
Please carefully read the entire instructions for proper use.
CONTAINS:
• 1x LILIE Certec® 3in1 capsule (30L / 100L / 200L)
• Instruction manual
• 1x nylon thread with a control tag
MATERIAL COMPOSITION:
• Case:
LM T101 (Polypropylene)
• Interior material: Certec® 3in1 ceramics tube and
Bio-Electro-Deposit
POSSIBLE SCOPES OF APPLICATION:
Fresh water tank, water canister, aquarium, water dispenser, or other devices for drinking water.
SAFETY INFORMATION:
• Not suitable for children under 3 years. Choking hazard!
WARNING: Do not open the capsule. If doing so, the food safety of the product can no longer be
guaranteed.
WARNING: Please keep in mind the max. operation temperature of 100°C.
SHELF LIFE AND STORAGE
Best before: 30.04.2022 (unopened, normal room temperature). Please keep the capsule out of the reach
of children. Do not store Certec® 3in1 capsules together with strong oxidants, acids, lye, halogens, halogen
compounds, or concentrated hydrogen peroxide solvents.
CLEANING AND DISPOSAL
If the capsule is used exclusively for fresh drinking water it is not necessary to clean the capsule. If used for re-
asons other than drinking water (e.g. in an aquarium with algae), occasional cleaning (scrubbing) of the surface
of the ceramics is recommended. For this purpose the capsule can be opened because the food safety of the
capsule cannot be guaranteed if used with water other than fresh drinking water. Certec® 3in1 can be disposed
of with normal household waste.
Certec® 3in1‘s MODE OF ACTION
Certec
®
3in1‘s mode of Action
Certec
®
3-in-1 is a conservation product designed to preserve fresh drinking water. It protects drinking water from
microbial contamination and inhibits biolm formation in freshwater systems. Automatically with every tank rell,
the bioelectrical deposit ensures the self-regulated release of negative ions and bioelectricity. These Negative
Ions attach to bacteria in the water forcing the Metabolic Processes to halt completely. Thus DNA formation is
stopped and the cell membrane is left damaged and incapable of any further formation. In lieu of multiplying and
colony formation, the bacteria perish from starvation. The microscopic labyrinth-like structure of the Certec
®
3in1
ceramics covers an eective surface of approximately 1050m². Being that bacteria follow chemical and electrical
signals and prefer the largest usable surface area for colony formation, the ceramic functions as an attractor
during this process. Consequently, an attraction eect occurs, which is additionally enhanced by the Negative
Ions and Bioelectricity. Within this deep structure of the ceramics, inactivated bacteria are permanently retained
and additionally neutralized by the sharp edges of the ceramics.
USE AND INSTALLATION
Clean and disinfect the container (in which the capsule will be used) thoroughly before using the Certec® 3in1
30L/100L/200L capsule for the rst time. Attach the nylon thread to the loop. Indicate the date of rst
application on the description eld on the tag with a waterproof pen (e.g. overhead marker, permanent marker).
Let the capsule then sink into the water (with the end with the breathing holes ahead). The capsule works best
when floating vertically in the water (the cap with the nylon thread attached should be approx. 1 cm above the
water surface). If this is not the case right away, you can achieve that by moving the capsule, rearranging it,
or letting the capsule sink into the water again. Make sure the end of the nylon thread with the tag is hanging
out of the container. If necessary, position the thread between the container opening and the lid. Always make
sure that there is enough thread hanging inside of the container for the capsule to be able to sink all the way to
the bottom (when the tank is empty). The containers can be regularly relled with fresh drinking water. When
relling a container, make sure the capsule swims upright again.
Notes:
Water motion is very important for an ideal protection of your fresh water system. When driving the vehicle or
lling the tank e.g., the water in the tank is being moved and
negative ions
disperse in the fresh water system.
Make sure that the water in the tank/container is moved regularly.
WARNING:
Ideally, the Certec® 3in1 capsule is always surrounded by water. If the capsule is left in an empty container for
more than 1, max. 2 weeks the protection and drinking water safety can no longer be guaranteed. In case you
plan to keep your water container empty for a long period of time, make sure you temporarily store the capsule
in another, lled container (e.g. a water bottle). Alternatively, the capsule can also be blow-dried and then be
kept in the original plastic bag.
WARNING:
Certec® 3in1 capsules cannot purify water which is already contaminated or germ-infested. If the capsule is
contaminated because it has been used (e.g. with industrial water* or in an aquarium) or stored improperly
before rst applying it on drinking water, it may not be used anymore for reasons of hygiene.
* Industrial water refers to water which is generally not suited for drinking. Containers have to be lled with fresh water.
DOSAGE
Over- or under-dosing is impossible because the emission of the negative ions and bioelectricity is self-regulating.
Eective period: 12 months (after rst contact with water)
Certec®3in1 30L Certec® 3in1 100L Certec®3in1 200L
Containers up to 30 liters Containers up to 100 liters Containers up to 200 liters
Conservation up to 9.000 L Conservation up to 30.000 L Conservation up to 70.000 L
FURTHER QUESTIONS?
In case You have further questions concerning the mode of action or the scopes of application of Certec® 3in1,
don’t hesitate to visit our website: www.certec-lter.com
BAUA: N-75579
Use biocides safely. Before using biocidal products always read the label and product information.
LILIE GmbH & Co. KG Heinrich-Hertz-Straße 30 D-74354 Besigheim Germany
1
Stand 22.02.2018 / # E-0892_A_20520_20521_20523 / © LILIE GmbH & Co. KG Technische Änderungen vorbehalten/Subject to technical modications
02 / 04.2019