Line Seiki DK-5005B Series Guide

The device can save up to 250 records as long as each record has less than or
equal to 192 data.
Definition:
• record is a collection of data saved in the device from Start Time to End Time.
• data is timestamped data containing 5 input values and total input value.
1 data = (each input value) + (total value of 5 input values) + (Date & Time)
#
#
#
■View Saved Record
●Push Input Key with Key pressed.
●The device shows the final value in a record which you saved last time.
[If no record is saved in the device]
[If any records are saved in the device]
Timestamp of the final value in a record which you saved last time is displayed.
►View input values : Push Key
►View Date and Time : Push Key
►View the previous record : Push Key
►View the next record : Push Key
●By pushing Key , the device is in a standby mode again.
F
F
3
MEM
YYYY MM DD hh mm
1
2
3
4
DK-5005B Start Guide
LINE SEIKI CO., LTD.
■ Name of Each Part of DK-5005B
7
1
SUB
DK-5000 Series
F
2 3 4 5#
POWER
  
YYYY MM DD hh mm
TIMEM SUB
8
1 2 3
4
56
910
15
14
11
12
13
Clock / Memory No.Display
Input Value Display
Date/Time Icon
Subtract Icon
Low Battery Icon
Software Link Icon
5.5 mm DC Jack
Power Key
[#] Key
Input Key
Subtract Key
Strap Hole
Function Key
USB 2.0 Port
Total Count Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
■ Before Start Counting
[Setting Date and Time]
YYYY MM DD hh mm
●Press Power Key for 1 second to turn up the device.
When turned up, the device is in a standby mode. "stnd by" is displayed on LCD.
●Push Input Key with Key pressed.
Now you can start setting date and time.
●Date and Time will be displayed on LCD as shown below in the manner of
"YYYY MM DD hh mm."
●Every time you push each Input Key, each corresponding figure of
year, month, day, hour or minute will be increased.
When you push each Input Key with Key pressed,each corresponding
figure will be decreased.
●Push Key after you input date and time. Now the setting for date and time
is finished. The device will be in a standby mode again.
●If you start counting, refer to the next section "■Save Record."
If you want to turn off the device, press Power Key for 3 seconds.
F
F
1
YYYY MM DD hh mm
1
=year
2
=month
3
=day
4
=hour
5
=minute
SUB
*NOTE
If the power supply is shut off, the built-in clock stops. This requires resetting of Date & Time when you use the device next time.
To avoid stopping the clock, please install batteries into the device. As long as the electricity is supplied to the device through AC/DC adapter or USB charging cable,
power is not supplied nor drained from batteries. Therefore, it is recommended that batteries be always installed in the device even if the electricity is supplied to the
device through AC/DC adapter or USB charging cable.
■ Save Record
●Press Power Key for 1 second to turn up the device.
When turned up, the device is in a standby mode. "stnd by" is displayed on LCD.
●Press Key for 1 second to enter "Record Mode" and start saving data.
●Push Input Key - to increase each value.
By pushing each Input Key with Key pressed, each value decreases.
●Every time you push Input Key, a new data is saved in the device automatically.
●Press Key for 1 second to finish saving data. 1 "record" will be created and
saved in the device. Now the device is in a standby mode again.
Total of 5 input values
Time
1
5
SUB
TIME
12 3 4 5
1
SUB
DK-5000 Series
F
2 3 4 5#
POWER
1
SUB
DK-5000 Series
F
2 3 4 5#
POWER
1
SUB
DK-5000 Series
F
2 3 4 5#
POWER
Record Mode
Standby
Mode
Standby
Mode
Start Time End Time
#
Push Push
1st data 2nd data 3rd data
1 Record
Input value of each counter

■ Clear All the Records
5
5
●Please confirm "stnd by" is displayed on LCD of the device.
●Push Input Key with Key pressed to show the record you saved.
●Push Input Key to clear all the records.
The message below will be displayed on LCD to confirm whether to clear
all the records.
[If YES (Clear All the Records)]
► Press Input Key for 1 second.
YES will be selected, and all the records will be cleared from the device.
While clearing all the records, the device shows "All data ---- ---- Clear" on its LCD.
"no data" will be shown on LCD to confirm that there is no record saved in the device.
Push Key, and the device is in a standby mode again.
[If NO (Do Not Clear All the Records)]
► Press Input Key for 1 second.
Records will not be cleared.
Push Key, and the device is in a standby mode again.
F
F
F
3
4
DK-5005B Start Guide
LINE SEIKI CO., LTD.
Purpose
Turn ON device
Turn OFF device
Start setting Date and Time
Go back to Standby Mode
Start saving record
Finish saving record
View saved records
View input Values
View Date and Time
View timestamp of previous record
View timestamp of next record
Clear all the records
Key Operation
Power Key 1 second
Power Key 3 seconds
[F] + [1]
[F]
[#] 1 second
[#] 1 second
[F] + [3]
[F] + [3]→[4]
[F] + [3]→[4]→[3]
[F] + [3]→[2]
[F] + [3]→[1]
[F] + [3]→[5]→[4] 1 second
■ Exclusive Software■ List of Key Operations
Exclusive software for DK-5000 Series offers you the functions to export the records
to your computer, to manage and edit the data in .xls/.csv format and many more!
Please visit our website and download the software, which we hope you will find
useful, for free of charge at the link below:
http://www.lineseiki.com/products/productdetails.aspx?Id=119