LINET TOM 115 User manual

____________________________________________________
_________________________________________________________________
LINET, spol. s r. o. Tel.: + 420312 / 524 139, 576 111
Želevčice 5 Fax: + 420312 / 522 668
274 01 Slaný
Czech Republic
TOM Child Bed (115,140)
1999/1
st
Edition
9200-0065
User Guide and Technical Description

________________________________________________
_________________________________________________________________
2 TOM Child Bed
August 1999, 1
st
Edition
Dear customers,
Thank you for buying a product from our company.
We believe you will be satisfied with it during its
whole lifetime. Thanks to a careful selection of
materials, state-of-the-art production technology and
careful work of our staff, our beds reach such
parameters that guarantee a high quality, reliability
and a permanent use value.

_________________________________________________
_________________________________________________________________
3 TOM Child Bed
August 1999, 1
st
Edition
Table of Contents
User Guide Instructions 4
Purpose of Use 4
Technical Details 4
Device Safety 4
Device Description 4
Function Description 5
Delivery 5
Safety Instructions 5
Assembly 6
Function Check-up 6
Positioning 6
Back Part Positioning 6
Setting Height and Incline of Bed Level 6
Setting Side Grids 7
Accessories 7
First Cleaning 7
Disinfection / Sterilization 7
Troubleshooting 8
Maintenance 8
Wear 8
Functionality 8
Wheels 8
Environmental protection 8
Spare Parts 10
Warranty 10
Contact 12

________________________________________________
_________________________________________________________________
4 TOM Child Bed
August 1999, 1
st
Edition
7
6
3
2
1
4
5
User Guide Instructions
This user guide does not only address service staff trained to take care of children but
also people who have been entrusted with looking after and taking care of a child.
! Every product handling must be based on a thorough knowledge and
observance of the user guide. Therefore, keep this user guide in a safe place
until the child bed is no more in use. It is recommended that the user guide
be attached to the bed.
Purpose of Use
The child bed is primarily used in children clinics and hospitals. The bed solely serves
this purpose. Other methods of use must be consulted with LINET s.r.o. in advance.
Technical Details
TOM 140 TOM 115
MAX. LENGHT (cm) 165 131
MAX. WIDTH (cm) 83 63
Bed level height settings 78 - 109 cm in 10 positions
78 - 109 cm in 10 positions
Back rest positioning to 70˚ -
Tr/Atr adjustment 12˚/12˚ 12˚/12˚
Device Safety
The product complies with safety regulations of DIN 66078/EN-2 and MED PrG. The
product has a CE mark in accordance with Directive 93/42/EWG for medical
products.
Device Description
1. Siderail
2. Siderail
control pedal
3. Wheel brake
4. Anti-shock
wheel
5. Back part
handle control
6. Toy basket lath
7. Bed level
height setting
Function Description
Depending on the model, the following positions may be set using back part or height
positioning:

_________________________________________________
_________________________________________________________________
5 TOM Child Bed
August 1999, 1
st
Edition
Back Trendelenburg's
position
Height Anti-Trendelenburg's
position
Positioning is done mechanically - using an appropriate lever.
(see. the Positioning section)
Variants of the model
Model Colour tint
3 … RAL 1015 white coffee
4 … RAL 7035 grey
2 …TOM 115 B … RAL 9002 light grey
Variants
3 …TOM 140 C … RAL 9010 white
Model Number … 1
3
3
1
x 0
0
1
x 0
2
A
0
Delivery
The child bed is usually delivered fully assembled, or expert staff assembles the bed
on site. The completeness should be checked against delivery documents. Any
insufficiencies or defects must be immediately communicated to the forwarding agent
and supplier and must be recorded in the delivery certificate.
Safety Instructions
It is necessary to read through and observe the safety instructions prior to using the
child bed.
It is necessary to read through and observe the safety instructions prior to
using the child bed.
The child bed may only be used on flat and solid floors.
When setting various positions, make sure that the no persons, body parts or other
objects are located in the positioning area.
Do not put the side grid under a load grater than 25 kg vertically and 25 kg
horizontally.
Prevent the child from excessive leaning on the side grid with its upper body.
The child bed may be used up to a maximum weight of 75 kg of the child.
If the bed level is in the highest position, there is a danger of pinching the
fingers when lowering the side grid.
The lock must be open when lowering
the side grid !
Lock open

________________________________________________
_________________________________________________________________
6 TOM Child Bed
August 1999, 1
st
Edition
if a child is in the bed, the lock must
be closed !
Lock
closed
Assembly
If need be, simple assembly tasks may be carried out by trained authorized persons.
Function Check-up
Prior to every new use of the child bed, a function check-up must be performed, i.e.
whether all positions may be set up to the maximum positions and whether the
positioning can be done easily.
Positioning
Back Part Positioning
Upwards
By turning the hand wheel counter-clockwise,
the backrest can be moved up.
Downwards
By turning the hand wheel clockwise, the
backrest can be moved down. (see figure)
Setting Incline and Height of Bad Level
Height
Loosen the bar fixed in the cog-rack by
pulling toward yourself (out of the cog-rack).
Then set the required height by placing the
bar in the same cog-rack position for both the
head and legs.
Incline
By fixing the bar in different positions of the
cog-rack for head and leg parts, you can set
various inclines of the bed level
(Trendelenburg's / anti-Trendelenburg's
position).

_________________________________________________
_________________________________________________________________
7 TOM Child Bed
August 1999, 1
st
Edition
Setting Siderails
Downwards
First raise the siderail (1), and while stepping
on the pedal (2), let it drop to the required
position (3).
By stepping off the pedal (2) you will fix the
required height.
Upwards
First raise the siderail (1), then step on the
pedal (2) and raise the siderail. Then step off
the pedal (2) so that the side grid position
can be fixed.
Accessories
The child bed may be equipped with the following accessories:
- toy basket
- diaper basket holder
- infusion post
- diaper basket
- waste bowl holder
First Cleaning
Prior to using the bed for the first time, the child bed must be wiped with a dry mop.
Disinfection / Sterilization
The child bed must be disinfected on a regular basis, at least prior to every change of
patient. The child bed must not be disinfected in a washing machine or using a water
stream.
To disinfect the child bed, the following substances are recommended, which may
only be replaced by equivalent products:
Terralin, Perform, Sargotan (Schülke & Mayr GmbH, Norderstedt).
The products must be used in accordance with instructions stipulated by the
manufacturer! This namely applies to substance doses and a possible danger when
combining it with other products.

________________________________________________
_________________________________________________________________
8 TOM Child Bed
August 1999, 1
st
Edition
Troubleshooting
Defects Possible causes Help
Positions cannot be
changed using the
mechanism or
1. The mechanism is
blocked
Improper operation
1. Check mobile parts and
remove any strange
objects (rugs or other
material)
Use in accordance with
the user guide.
Side grid mechanism does
not work properly 2. A strange object in the mechanism or the
mechanism is defective
2. Have expert staff
perform an overall check-
up
Warning!
The bed must not be
further used!
Maintenance
The child bed should be maintained regularly. If more and more defects are
determined through maintenance, which could not be repaired, the bed must be put
out of operation and used no more. The following points and relevant parts must be
checked and maintained at least twice a year: Perfect condition of the side grid safety
locks and the positioning mechanism must be checked at least once in six months.
Wear
The child bed must be checked whether there are any worn spots, scraped places or
other wear and damage. Their causes must be determined and the defects repaired
by replacing the individual parts. Any position fixing and alterations must be easily
feasible. Side grid guides in the head and leg parts (fronts) should be sprayed with a
silicon lubrication spray.
Functionality
Check whether all settings can be done up to the maximum positions.
Wheels
Check the functionality of the wheels and remove any dust accumulated, material
reeled (threads, hair etc.).
Environmental protection
The company LINET, spol. s r.o. is aware of the necessity to protect the environment
for future generations and therefore devotes great attention to the development,
innovation – planning, production and use of such technology and materials that are
environmentally friendly.
This product is constructed from materials that are environmentally friendly! The
product does not contain dangerous substances based on cadmium, mercury,

_________________________________________________
_________________________________________________________________
9 TOM Child Bed
August 1999, 1
st
Edition
asbestos, PCB or CFC! The operational noise-level of the product meets the
requirements for the protection of public health against undesirable noise and
vibration in protected indoor building premises. Wooden parts used in the product
are not made from exotic wood such as mahogany, jacaranda, ebony, teak, grenadil
or santo, and do not come from the Amazonian rainforests or other virgin forests.
All waste packaging left over from when the product is made operational is marked in
accordance with the legal regulations on packaging. Sort the waste packaging, which
is left over once the product is made operational by following the graphic symbols and
deliver it to a person authorised to further utilise it.
The product contains recyclable steel, plastic and electronic components – to
optimise recycling once the operation of the product ends, separate the individual
parts so that the raw materials from which the product is made can be put to further
use (see CHART).
The product may contain lead accumulators (AKB) marked with this graphic symbol:
Once the service life of these accumulators ends, deliver them to a person authorised
for recollection (you will not have to pay a recollection charge!).
The product is not designed for removal as part of communal
waste!
Information for the users of electric and electronic equipment (see CHART):
This symbol on the product or accompanying documentation means
that the electric or electronic components used (waste from electric
and electronic equipment = OEEZ/WEEE) may not be disposed of
(destroyed) together with communal waste. In order to correctly
eliminate the entire product, deliver OEEZ/WEEE to the workplaces
of firms specialised in this task, where they will be accepted free of
charge.
By removing this product appropriately you will help preserve valuable natural
resources and help prevent potential negative effects on the environment and human
health, which could result from the incorrect destruction of waste. You can request
further details from authorised environmental protection authorities, or the closest
collection point for separated waste collection.
Fines may be imposed under national regulations if an incorrect
procedure for waste removal is used.

________________________________________________
_________________________________________________________________
10 TOM Child Bed
August 1999, 1
st
Edition
Information for users about the removal of electric and electronic equipment in
other countries outside the European Union:
The symbol shown above is valid only in the countries of the European Union. You
can apply to your authorities or the equipment seller for detailed information about the
correct way of removing separated OEEZ/WEEE (electric and electronic equipment)
and lead accumulators.
Protect your health and the environment. Thank you.
Spare Parts
Please contact the nearest service department, commercial department or your
supplier for more detailed information.
Warranty
You have purchased a child bed - a product by LINET. The bed has been produced
with a due care using high quality materials and modern production technology.
The child bed is subject to a 24-month warranty
starting on the purchase date. The warranty applies to all defects and faults due to
material and workmanship. It does not cover defects and faults caused by improper
handling and external causes. If any time during the warranty period there is a cause
for a rightful claim, the defects will be repaired free of charge. You can claim a
warranty repair based on the delivery certificate or an invoice with the purchase date.
Our commercial and delivery terms apply.

_________________________________________________
_________________________________________________________________
11 TOM Child Bed
August 1999, 1
st
Edition
EC CONFORMITY DECLARATION
Date of issue: 27. 9. 2001
Conformity declaration issued by:
Commercial name
Linet spol. s r. o.
Registered address
Želevčice 5, 274 01 Slaný, Czech Republic
Reg. No. 00507814
Telephone [phone]
Fax [phone]
As the producer of the product -
name (brand):
TOM 115/140
Variants of the product: 1331XXXXXXXXX (the variants are specified in the
technical documentation of the product)
Description and function
designation: Positionable children bed for children hospital units
Clssification of the product as the
medical device: Class I nonsterile, without measuring function
A) Declaration
I declare that the said product is safe under the conditions of common use in compliance with the
instructions and that measures have been taken to ensure the conformity of all the products brought
to market with basic requirements of directives related thereto, stated in paragraph B.
B) Fulfilled technical requirements
This product's characteristics comply with the technical parameters related to it and stated in MDD
93/42/EEC which stipulates the technical parameters for healthcare products.
C) Means of assessing conformity
Conformity was assessed by the procedure stated MDD 93/42/EEC, Annex VII .
Ing. Zbyněk Frolík
company director

________________________________________________
_________________________________________________________________
12 TOM Child Bed
August 1999, 1
st
Edition
Contacts
LINET spol. s r.o. Želevčice 5, 274 01 Slaný, Czech Republic
Please direct your inquiries to: connection:
−Commercial Department Tel.: +420 312 / 524 139, 576 111
−Service and Claim Department Tel.: +420 312 / 576 259, 524 139
Fax: +420 312 / 522 668
E-mail: inf[email protected]
http//www.linet.cz