Kinder Valley Harper User manual

IMPORTANT! KEEP FOR FUTURE
REFERENCE
Dimensions(cm): (L)144 x (W)77 x (H)145*
Fits Mattress Size(cm): (L)140 x (W)70
• Easy assembly • Safe & Sturdy • Space Saver Size
• 3 Base Height Positions • Teething Rails
*Approx. measurements only. Sizes may vary.
Contact Us...
E[email protected]
T0844 7744644 - Option 2
www.kinder-valley.com
Vaey
K I N D E R®
ASSEMBLY INSTRUCTIONS
Harper Toddler Bed House
*FACTORY CODE*

IMPORTANT! KEEP FOR FUTURE REFERENCE
ASSEMBLY INSTRUCTIONS
HARPER TODDLER BED HOUSE
Vaey
K I N D E R®
Instructions for safe use:
Before you start
WARNING - Do not place this child’s bed in close proximity to heat sources,
windows and other furniture e.g. open fires, radiators, gas and electric heaters
etc.
WARNING - Do not use this child’s bed if any part is broken, torn or missing
and use only spare parts approved by Kinder Valley.
WARNING - Do not use more than one mattress.
WARNING - Regularly check the screws are secure, loose fittings can result in
snagging clothes or cords posing a risk of strangulation.
Assembly fittings should always be tightened properly and care should always
be taken that no screws are loose to ensure your child does not trap parts of
the body or clothing. Do not over tighten.
WARNING - Only use replacement parts supplied by or approved by
Kinder Valley.
WARNING - Do not disassemble once the bed has been built.
This Kinder Valley toddler bed conforms to BS 8509:2008+A1:2011.
This Kinder Valley toddler bed is suitable from approximately 18 months to
4 years. It is intended to be used by one child at a time.
We recommend you use any Kinder Valley mattress size 140cm x 70cm.
Use only on firm ground which is on a horizontal level and dry.
Children are likely to play, bounce, jump and climb on beds, therefore the
child’s bed should not be placed too close to other furniture or windows,
blind cords, curtain pulls or other strings or cords, and should be placed
either tight to any wall or have a gap of 30cm between the wall and the
side of the bed.
In order to clean, use only a mild detergent and warm water. Do not bleach
or use any abrasive substances.

CHECK THAT YOU HAVE ALL FIXTURES AND FITTINGS BEFORE
ASSEMBLY, AND ENSURE THEY ARE NOT BROKEN.
Fixtures & Fittings
A x3 Long Panels
Number of people to assemble:
Two adults are required to
assemble this item.
x1 Base x2 Short Arm x2 Long Arm
x4 Legs x8 Dowels
(40mm)
x9 Barrel Nuts
x4 Conformats
(50mm)
x12 Conformats
(60mm)
x2 Long Bolts
(100mm)
x8 Short Bolts
(50mm)
x1 Allen Key
x2 Short Panels
B
C D E
F G H I
J K L
MN
x4 Conformats
(90mm)

Step 1
Join x1 Short Arm to x1 Long Arm using x1 Long Bolt and x1 Barrel Nut .
Repeat for remaining Short Arm and Long Arm .
D E I H
D E
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 2
Join x2 Legs to
using x2 Dowels and x2
Conformats .
Repeat for remaining Legs
and .
F
G
Step 1
K
F
Step 1
H
I
ED
G
F
G
K
F
K

IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 3
Step 4
Join x1 Short Panel to
using x2 Dowels and x2
Conformats .
Repeat for remaining Short
Panel and .
B
G
Step 2
M
BStep 2
Join Base to both parts of using x8 Short Bolts and x8 Barrel Nuts .
HC J
Step 3
GG
MM
B
J
JJ
J
C
H
H
H
H

IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 5
L
L
L
L
L
L
Complete assembly of your Harper Toddler Bed House by joining x3 Long Panels
to using x12 Conformats .
A
L
Step 4
A
A
A