2
IMPORTANT: IT IS IMPORTANT THAT THE ENTIRE INSTALLATION INSTRUCTIONS BE READ THOROUGHLY BE-
FORE PROCEEDING WITH THE INSTALLATION.
1. INTRODUCTION
Thank you for choosing a Link Mortuary Equipment CDS300 Casket Drape Frame. We want to help you get the best re-
sults from this drape frame and to operate it safely. This instruction contains information to assist in the installation of the
Link Mortuary Equipment CDS300. This instruction is intended solely for use with this product.
All information in this instruction is based on the latest information available at the time of printing. Link Manufacturing re-
serves the right to change its products or manuals at any time without notice.
Damaged components should be returned to Link with a pre-arranged Returned Materials Authorization (RMA) number
through the Customer Service Department. The damaged component may then be replaced if in compliance with warranty
conditions.
Assembly:
A. Assemble the left and right frames using the frame splice (Item #5) by depressing the snap buttons (Item #3) and
sliding the tubes together until the buttons snap into place. Note the orientation of the strap.
LINK® MODEL
“CDS300” (7803A000)
PARTS LIST
ITEM PART # DESCRIPTION QTY
115070057 PLUG, 1 INCH SQ. X 18 GA 6
278034110 INSTRUCTIONS-INSTALLATION 1
31500-1149 BOX (21.75 X 2.75 X 34.00) 1
41506-0014 3/16 OPEN-END BLIND RIVETS 1
51506-0202 BUTTON-SNAP, SPRING LEG 2
61507-0321 HANDLE-STRAP 1
77803-0001 SPLICE-FRAME 1
87803-1001 FRAME-RIGHT 1
97803-1002 FRAME-LEFT 1
10 15070487 VELCRO HOOK AND LOOP 1" BULK (INCHES) 2.5