Liquifi BBI-17ME User manual

INSTALLATION GUIDE
Built In Series
THE ORIGINAL WATERPROOF TV
1300 938 887
sales@liqui.com.au

2
Contents
Page 3. Aboutthisguide
Page 4. Foryoursafety
Page 5. Section1:Installationinstructions
 TELEVISIONInstallationtasks
SPEAKERInstallationtasks
TEST
RECESSDIMENSIONS
Page 14. Section2:Troubleshooting
Page 16. Section3:Waterproofremotecontrol

3
About this guide
ThisguidewillassistintheinstallationanduseoftheLiquifiBuiltInSeriesofwaterproofHDtelevisions.
For further assistance please go to www.liquifi.com.au.
APPLICABLE MODELS
ThisguideisapplicabletothefollowingmodelsintheBuilt-InSeriesrange.Pleaseensureyourmodelislistedinthe
tablebelow.
MODELS FINISH/STYLE TV SIZE
  
BBI-17ME, BBI-17BE, RBI-17FME, RBI-17MBE, RBI-17BBE FullMirror/MirrorBorder/GlossBlack 17”
BBI-19ME, BBI-19BE, RBI-19FME, RBI-19MBE, RBI-19BBE FullMirror/MirrorBorder/GlossBlack 19”
BBI-22ME, BBI-22BE, RBI-22FME, RBI-22MBE, RBI-22BBE FullMirror/MirrorBorder/GlossBlack 22”
BBI-26ME, BBI-26BE, RBI-26FME, RBI-26MBE, RBI-26BBE FullMirror/MirrorBorder/GlossBlack 26”
BBI-32ME, BBI-32BE, RBI-32FME, RBI-32MBE, RBI-32BBE FullMirror/MirrorBorder/GlossBlack 32”
 
BBI-17SE, RBI-17SE StainlessSteel 17”
BBI-19SE, RBI-19SE StainlessSteel 19”
BBI-26SE, RBI-26SE StainlessSteel 26”
BBI-32SE, RBI-32SE StainlessSteel 32”
PACKAGE CONTENTS
Yourtelevisionpackageshouldconsistofthefollowing:
1. TelevisionUnit
2. WaterproofSpeakers(1pair)
3. 2corespeakercables(1pair)
4. 12VDC4AAdaptorandACPowercord(32”excludedduetointernalpowersupply)
5. Waterproofremotecontrol
6. Bracketforconcealed,recessedinstallation
Ifanyitemsaremissing,pleasecontactyourdealer.

4
For your safety
1. DO NOT USE A DAMAGED SOCKET AND DO NOT LET THE POWER CORD
TOUCH A HEAT SOURCE. Thismaycauseanelectricshockorfire.
2. DO NOT CONNECT TOO MANY EXTENSION CORDS OR PLUGS TO
AN OUTLET. Thismaycauseafire.
3. DO NOT ATTEMPT TO SERVICE THE UNIT. CONTACT AN AUTHORISED
DEALER OR REPAIR SERVICE. Servicingtheunityourselfmaycausean
electricshockorfire.
4. KEEP THE POWER ADAPTOR AWAY FROM ANY HEAT SOURCE OR WATER.
Thismaycauseafireordamage.
5. IF THERE ARE ANY UNUSUAL SOUNDS OR SMELLS COMING FROM
THE UNIT, UNPLUG IT IMMEDIATELY AND CONTACT AN AUTHORISED
DEALER OR REPAIR SERVICE. Thismaycauseanelectricshockorfire.
6. IF AN OUTSIDE ANTENNA IS CONNECTED TO THE UNIT, ENSURE THE
EXTERNAL TO INTERNAL CABLE ENTRY IS FULLY SEALED. Thismay
causeanelectricshockorfire.
7. ENSURE THE ANTENNA IS LOCATED AWAY FROM OVERHEAD CABLES.
Thismaycauseanelectricshock.

5
Section 1: Installation instructions
TELEVISIONINSTALLATIONTASKS
1. DETERMINE DESIRED INSTALLATION LOCATION
Thetelevisionshouldbeat,orwithin15degreesofeyelevel,fromthedesiredviewinglocation.
Foraninstallationaboveabathtub,thebottomofthetelevisionshouldbeapproximately200mm
abovethetopofthebath.
2. ENSURE POWER SUPPLY IS WITHIN 1M OF YOUR DESIRED INSTALLATION LOCATION
Ifapowerpointisrequiredtofacilitateinstallation,pleasereferthisworktoalicensedelectrician.
3. CUT A RECESS FOR YOUR TELEVISION
Thesizeoftherecessisdependentonthemodelandsizeofthetelevisionyouhavepurchased.Please
refertoTableAoverleafforrecessdimensions
4. ASSEMBLE THE BRACKET AS SHOWN
Assemblyofthebracketwillvaryslightlydependingonwhichtelevisionmodelyouhavepurchased.
RefertoFigureAorBasareference.Insomeinstances,(modelnumberbegginingwithR)theTVwillbe
deliveredwiththebracketpre-assembled.

6
5. TRIAL FIT THE BRACKET AND TV
Trialfitthetelevisiontoensurethatitsitsflushwiththewall.Atthispoint,youmayneedtoaddnoggins
orstudpackingtomountthebracketto.Thefrontofthebracket,andwall(includinganyfinishingsuchas
tiles)shouldbeinthesameplane.
6. RUN INPUT CABLES TO THE RECESS LOCATION
Youmaychoosetorunastandardantennacable(forFreetoAirtelevision),HDMI(forFoxtel,andother
videofeeds)orotherinputs.
7. RUN SPEAKER CABLES TO THE RECESS LOCATION
Speakercablesmustrunfromtherearofthetelevisiontothedesiredspeakerlocations
(normallyceilingmounted).
8. FIX THE BRACKET
Screwthebracketintotherecesswiththescrewsandmountinghardwaresupplied.
9. CONNECT THE TV 
Connectthetelevisiontothepowerandinputcables.
10. MOUNT THE TV AS SHOWN IN FIGURE C AND FIGURE D
Mountthetelevisionintothebracket.Mountingvariesslightlydependingonthemodelofthetelevision
youhavepurchased.SeeFigureCandFigureDforthetwomountingmethods,onpage10and11ofthis
guide.

7
SPEAKERINSTALLATIONTASKS
1. DETERMINE DESIRED INSTALLATION LOCATION
Thespeakersshouldbemountedintheceiling,andspacedatleast1maparttoallowforastereoeffect.
2. CUT TWO 100MM DIAMETER HOLES IN THE CEILING
Atthedesiredspeakerlocationpoints,useaholesawattachmentwithapowerdrill,tocuttwo85mm
diameterholes.
3. RUN THE SPEAKER CABLING THROUGH THE SPEAKER HOLES
Pickupthefreeendsofthespeakercables(theotherendsshouldbeattachedtotherearofthe
television,asperstep7inthepreviousTelevisionInstallationTasks).
4. CONNECT THE SPEAKERS
Usingthespeakerconnectiontabs,connectthespeakercablestotherearofthespeakers
5. SLIDE THE SPEAKERS INTO PLACE
Slidethespeakerthroughthefrontoftheceilingholes,beingcarefultoholdthemountingclipsagainst
thespeakerstoallowthespeakerstofitthroughtheceilingholes.Oncecleared,theclipswillsnap
againstthetopoftheceiling,securingthespeakersintoplace.

8
TEST
1. TURN THE TV ON, TEST FOR VISION AND SOUND
Testthatthetelevision,turnson,canreadtheconnectedinputs,andthatthesoundworksproperly.
2. TROUBLESHOOT IF ISSUES ARE ENCOUNTERED
Ifyouhaveencounteredissuesduringtestingofthetelevision,pleaserefertosection2for
troubleshootingtips.
3. FINALISE INSTALLATION
Oncethetelevisionisoperatingtoyoursatisfaction,youneedtofinaliseinstallationbywaterproofingthe
recess.Removethetelevisionfromthemountingbracketand;
4. APPLY A BEAD OF SILICON
Applyabeadofsiliconaroundtherearfaceofthetelevisionfrontplate.Thiswillstoptheentryofwater
intothewallcavity.Thisiscritical,notforthesafetyofthetelevision,butrathertoensurethatnomoisture
slidespastthetelevisionandbuildsinyourwallcavity.
5. RE-MOUNT TELEVISION
Re-mountthetelevisionasperstep10inthepreviousTelevisionInstallationTasks.
NOTE:
Thepowersupplyisnotwaterproof,andmustbepositionedinadrywellventilatedarea,away
fromanywaterormoisture.Typically,itcanbemountedinthewallcavity,inawellventilated
position.Theleadmustnotbecut,shortened,lengthenedoralteredinanyway,asthiscould
potentiallydamagetheunit.
AllElectricalinstallationshouldbecarriedoutbyafullyqualifiedelectrician,andallfireand
safetyregulationsshouldbeobeyed.

9
Install Recess Dimensions
MODELS FINISH/STYLE TV SIZE WIDTH HEIGHT DEPTH
     
BBI-17ME, BBI-17BE,
RBI-17FME, RBI-17MBE,
RBI-17BBE
FullMirror/MirrorBorder/
GlossBlack 17” 500 325 95
BBI-19ME, BBI-19BE,
RBI-19FME, RBI-19MBE,
RBI-19BBE
FullMirror/MirrorBorder/
GlossBlack 19” 495 345 100
BBI-22ME, BBI-22BE,
RBI-22FME, RBI-22MBE,
RBI-22BBE
FullMirror/MirrorBorder/
GlossBlack 22” 560 390 100
BBI-26ME, BBI-26BE,
RBI-26FME, RBI-26MBE,
RBI-26BBE
FullMirror/MirrorBorder/
GlossBlack 26” 725 435 113
BBI-32ME, BBI-32BE,
RBI-32FME, RBI-32MBE,
RBI-32BBE
FullMirror/MirrorBorder/
GlossBlack 32” 810 545 125
    
BBI-17SE, RBI-17SE StainlessSteel 17” 490 325 95
BBI-19SE, RBI-19SE StainlessSteel 19” 515 350 105
BBI-26SE, RBI-26SE StainlessSteel 26” 722 435 120
BBI-32SE, RBI-32SE StainlessSteel 32” 830 575 125
TABLE A:RECESSDIMENSIONS
NOTES:
1. Alldimensionsareinmillimeters(mm)
2. Totaltelevisiondimensionsarelargerthanrecessdimensions,thisisbecausethefrontfaceoftheTVis
largerthantherecesstoallowittocovertheentirerecessneatly.
3. Donotexceedthestatedwidthandheightdimensions.

10
FIGURE A:ASSEMBLEDBRACKETFORFULLMIRROR/MIRRORBORDER/BLACKFINISH

11
FIGURE B:ASSEMBLEDBRACKETFORSTAINLESSFINISH

12
FIGURE C:MOUNTINGDIAGRAMFORFULLMIRROR/MIRRORBORDER/BLACKFINISH

13
FIGURE D:MOUNTINGDIAGRAMFORSTAINLESSFINISH

14
Section 2: Troubleshooting
ISSUE RESOLUTION
No display
CheckthepowersupplyofTV,suchasAC/DCadapter,AC
poweroutletandDCpowerconnection.
Checkinputsignalsourcesanditscables,oriftheTVissetto
standbystatus.
On screen prompt:
“No input” or
”Input Not Supported” or
“Out of Range”
CheckinputsareconnectedattheTVandatthesource.
ChecktheresolutionofthePCVGAoutput.Werecommend
theresolutionisnothigherthanXGA75Hz(for
15”TV),andnohigherthanSXGA75Hz(for17”and19”TV).
Theoptimumverticalrefreshfrequencyofthe
LCDis60Hz.
Image position is not right Selectthe“AutoConfig”ormanuallyadjusttheimage.
There are “water waves“, ”twinkling
points”, or incorrect colour on the screen
Checkthecableofinputsignalsourceandthequalityofthose
signals.
The volume of speaker is too low or
distorted
Ensurethatthespeakercableshavenotbeencrossedduring
install(i.e.positivetonegativeterminalconnections).
Checkthevolumevalue,increasethevolumeviaadjustingthe
OSDmenuandcheckthesoundsourcequality.

15
No sound
Confirmthesoundcontrolisnotsettomute.
Confirmspeakercableconnections.
Checkspeakerwiresfordamage.
ConfirmtheTVprogramorinputsignalissupposedtohave
sound(Itmaybesilent).
Staticorwhitenoisescreensaresilentindigitaltransmissions.
There are striped bands, or many
twinkling points on the screen; and the
colour is dark
CheckwhethertheTVisdisturbedbyotherstrongelectrical
sourcesnearby.Someolderappliances,oronesthatdonot
conformtocurrentregulations,mayemitelectricalinterference
(EMS).
Checkifalocaltransmitteriscausingtheinterference.
CheckifthepowercableorACadaptoristooclosetothe
antennacable.
The TV image is not clear
ChecktheRFantennaquality,theRFsignalintensityand
antennaconnectiontotheTV.
TrythemanualTVsearchfunction.Generally,theimagequality
ofcableTVtendstobebetterthananoutdoorantenna.

16
Section 3: Waterproof remote control
ABOUTTHISREMOTE
TheremotecontrolsuppliedwithyourtelevisionisratedIP68for
ingressionprotection.Thismeansitcanbesafelyhandledwith
wethands,intheshowerorinthebath.
Allremotecontrolsarewater-testedpriortosale.
Whencheckingorreplacingbatteries,pleaseensurethe
waterproofsealiscorrectlyre-fittedandthecoverproperly
secured.Ifnotsecuredcorrectly,thewaterproofingcouldbe
compromised.
NOTE:Wewillnotreplaceunitscoveredbyanywarranty,ifwe
suspecttheyhavefailedduetowaterdamagecausedbyusersnot
re-fittingthesealorcovercorrectly.
STORAGEANDMAINTENANCE
Donotdroptheremotecontrol.Whileitisrobust,itisnotdesigned
tobe“shockproof”
Donotplacetheremotecontrolnearsourcesofhightemperature.
TheInfraredwindow(theinfraredacceptor)oftheTVhostmachine
shouldnotbeexposedtosunlight,orotherstronglightingthat
maycausetheremotecontroltofunctionerratically.
Checkbatterypoweroccasionallyandreplaceasrequired.

1300 938 887
sales@liqui.com.au liqui.com.au
LiquifyPtyLtd(ABN74149812028)tradingasLiqui.POBOX2796,TarenPointNSW2229.AllRightsReserved©2011.