Lite-Puter ECP-T04 User manual

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04 [EUM-C]
ECP-T04
Touch Panel
【User Manual】
Lite Puter Enterprise Co., Ltd.
Website:www.liteputer.com.tw
E-mail:[e-mail]

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-B]
INDEX
PART 1 ECP-T04 INTRODUCTION.............................................................................1
CHAPTER 1ECP-T04..................................................................................................1
1-1 Feature ..............................................................................................................1
1-2 Specification.......................................................................................................1
1-3 Port Introduction.................................................................................................2
1-4 Dimension..........................................................................................................2
1-5 System Diagram ................................................................................................5
PART 2 ECP-T04’S PROGRAMMING SOFTWARE INTRODUCTION .......................6
CHAPTER 1FEATURE AND INSTALLATION ........................................................................6
1-1 Feature............................................................................................................6
1-2 Programming Software and Driver Installation................................................7
1-2-1 Programming Software Installation......................................................7
1-3 Device Driver Installation...............................................................................12
CHAPTER 2PROGRAMMING SOFTWARE INTRODUCTION.................................................15
2-1 Connection between Device and Programming Software .............................15
2-2 Menu and Interface Introduction....................................................................16
2-2-1 Menu Introduction..............................................................................16
2-2-2 Interface Introduction.........................................................................21
2-3 Component (button, label, bar, clock, picture, value) Setting.........................20
2-3-1 Button Setting....................................................................................24
2-3-1-1 Add Setting.................................................................................24
2-3-1-2 Button Property...........................................................................24
2-3-2 Label Setting.....................................................................................32
2-3-2-1 Add Label...................................................................................32
2-3-2-2 Label Property............................................................................32
2-3-3 Bar Setting ........................................................................................34
2-3-3-1 Add Bar ......................................................................................34
2-3-3-2 Bar Property ...............................................................................35
2-3-4 Clock Setting.....................................................................................36
2-3-4-1 Add Clock...................................................................................36
2-3-5 Picture Setting...................................................................................36

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-B]
2-3-5-1 Add Picture.................................................................................36
2-3-5-2 Picture Property..........................................................................37
2-3-6 Album Sertting...................................................................................37
2-3-7 Button,picture‘s IR remote control.....................................................37
2-3-8 Value Setting.....................................................................................43
2-3-8-1 Add Value...................................................................................43
2-3-8-2 Value Property............................................................................43
2-4 Page Setting..................................................................................................44
2-4-1 Page Setting......................................................................................43
2-4-2 Built-in Function Setting ....................................................................43
2-5 Button‘s Advanced Setting.............................................................................50
2-6 Scene Setting................................................................................................55
2-6-1 Scene editing ....................................................................................54
2-6-2 Scene recall ......................................................................................63
2-7 Schedule Setting...........................................................................................65
2-8 Component Configuration..............................................................................69
2-9 File Download................................................................................................72
GUARANTEE ...............................................................................................................76

ISO 9001 CERTIFIED www.liteputer.com.tw
1 LITE-PUTER
ECP-T04 [EUM-B]
Part 1 ECP-T04 Introduction
Chapter 1 ECP-T04
1-1 Feature
Programmable software to realize customized interface.
USB port for LAN connection, data download and remote monitoring.
Build-in functions include backlight setting, sound setting, clock setting, digital photo
frame and password protection.
Build-in loudspeaker.
IR remote controller.
Power consumption is 2W.
DC 12V external power.
1-2 Specification
Power supply
DC: 12V
Signal input
RS-485
Signal output
DMX512/1990
Signal connector
4 PIN green terminal
Connection port
USB/LAN
RAM memory
256MB
Screen size
5.7 inch
Resolution
320*240
Color
262K colors
screen
4-wire resistive touch panel
Size
215(W)x140(H)x 39(D)cm

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
2
1-3 Port Introduction
1 2 3 4
3,4 Port introduction
1
USB port
3
EDX port
2
LAN port
4
DMX port
1-4 Dimension
Back side

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
3
Front side

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
4
Wall box

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
5
1-5 System Diagram

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
6
Part 2 ECP-T04’s Programmable Software Introduction
Chapter 1 Feature and Installation
1-1 Feature
-Page
The components in page include button, label, bar, clock, picture. User can configure
them by the software.
The configurations can be transmitted from PC to ECP-T04 by USB /LAN.
Button component can add photo (there is built-in photos in software). Picture
component can add photo (you can choose any photo you like) and has text, shape and
style options.

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
7
-Timer
50 timers.
-Bulid-in function
Clock setting(can be synchronized with PC)
Backlight setting .(3 options: normal, turn off in 5mins and turn off in 20 mins)
Voice setting. (turn on/off screen tap sound)
Schedule setting/Preview function.
Password protection.
The above function can be link to the buttons on the page.
1-2 Programmable Software and Driver Installation
1-2-1 Programmable Software Installation
STEP-1 Copy ECP-T04‘s installation program from the CD to desktop as below,
STEP-2 Double click the icon,

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
8
User can select the language from the list.
STEP-3 After language selection and press Next,
Press Next again,
Traditional Chinese
Simplified Chinese
Japanese
English
Next

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
9
STEP-4 Press Yes,
Press Next in the following steps,

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
10

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
11
Press Finish and then installation is completed
After installation is ok, there are 2 shortcuts on the desktop and all programs separately,

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
12
1-3 Device Driver Installation
After programmable software installation, next step is device driver installation.
STEP-1 After installing programmable software correctly, copy the driver folder in
c:\Program Files\Lite-Puter\ECP-T04\Driver\ to the desktop.
STEP-2 Connect the device with PC by USB cable and it pops up the dialogue box will
be popped as below,

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
13
Select ―No, not this time‖ ,
Press Next ,

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
14
Select the driver folder on the desktop.
STEP-3 Press Next again,
Press Finish and the driver is installed.
How to install ECP-T04 USB Driver in Windows Vista 64 bit/ Windows 7 64 bit?
Following are the steps to disable driver signature enforcement in 64 bit operating system
1. During boot-up press F8.
2. In the list of options that appear select “Disable driver signature enforcement”.
3. Connect ECP-T04 with your PC by USB cable.
4. Install driver in folder “C:\Program Files\Lite Puter\ECP-T04\driver\ win7-vista\x64”

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
15
Chapter 2．Programmable Software Introduction
2-1 Connection between Device and Programmable Software
When the user opens the programmable software, it will display as below,
Figure 1：Device is unconnected with programmable software.
Figure 2：Device is connected with programmable software.
Connected by USB
Connected by Lan

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
16
2-2 Menu and Interface Introduction
2-2-1 Menu Introduction
File menu can create, open and save a file.
——Create new project
——Open file
——Save file
——Save as file
——Exit the programming software
Component(c) menu can add button, label, clock picture and bar.
——Add button
——Add label
——Add value
——Add clock
——Add picture
——Add bar
Format (F) menu can modify the component‘s position, size and space

ISO 9001 CERTIFIED www.liteputer.com.tw
LITE-PUTER
ECP-T04[EUM-C]
17
Align submenu include：
——Align with left
——Align with center
——Align with right
——Align with top
——Align with middle
——Align with bottom
Make same size submenu include:
——Make same width
——Make same height
——Make same width and height
Horizontal Spacing submenu include:
——make horizontal spacing equal
Vertical Spacing submenu include:
——make vertical spacing equal
DownLoad(D) menu ——Download the data on the programmable software to
ECP-T04.