litofelo WS-858 User manual
USER MANUAL
WS-858 Wireless Karaoke Microphone
1.INSTRUCTIONS
HOW TO USE
1. Long press the switch button to turn on the microphone within 3-4
seconds, the ‘Beep’ will be on/off. ***The default is Bluetooth mode;
2. Bluetooth connection: Turn on bluetooth on your mobile phone, and
search the bluetooth name ’WS-858’, click and connect successfully with
voice prompts;
3. Playing music: Tum on mobile phone music app, download your
favorite songs or accompaniment songs, volume could be adjusted by
cellphone and microphone.
4. Start singing and have fun!
5. During karaoke, you can shortly press the one-key elimination button
(REC) to weaken the original song and leave the accompaniment, or you
can long press the voice change button (REC) during karaoke to change
your original sound to magic sound.
Note: After connecting with the mobile phone once, the Bluetooth has a
memory function, and it will automatically connect after turning on the
phone. If you need to connect to the Bluetooth of other mobile phones,
you need to turn off the connected mobile phone's Bluetooth first.
HOW TO RECORD
1. Connect the audio cable, plug the micro USB port into pocket and
3.5mm audio port into cellphone; or directly connect to Bluetooth to use
the recording function;
2. Open recording app like Apple Music, Spotify, select your favorite
song, and start recording the song;
3. Debug and record songs: press the relevant mobile phone music
applications to operate.
Note: The song is kept in the APP, not in the microphone!
HOW TO CHARGE
1. When the battery voltage is too low, the product will automatically
turn off; Please charge the device for about 3 hours before using it. The
red light will turn on during charging, and the red light will go out when
it is fully charged. Please keep it off during the process!
2. Using Micro-USB cable to connect with mobile phone standard jack,
then the red light will be on;
3. Normal charging 4 hours, fully charging; the red light is automatically
off.
4. Normal conditions work 4-5 hours.
Note: Please keep it off during the process; The charger current cannot exceed 2A;
HOW TO USE TF CARD/FLASH DRIVE
1. Download the accompaniment/music into the TF card/flash drive,
insert the corresponding position on the microphone,
2. Automatically recognize and play music, use buttons to change
playlist/pause/play;
Note: The music is placed directly in the TF card/flash drive, do not store
in the folder, otherwise it will not be recognized;
2. SPECIFICATIONS
Microphone: Capacitance
Output power: 5W/6W (Speaker Output)
Charging port: micro-USB
Material: ABS material
Frequency Range: 100Hz-10KHz
Maximum sound pressure level: >115dB 1KHz THD<1%
Reverb Mode: Echo sound reverberation
Power Supply: Build-in-Li-ion Battery
Battery Capacity: 800mAh
Charging Voltage: DC 5V=1A
3. FAQS
1 Please read these precautions carefully before using the phone to
ensure the correct use of the microphone.
2 When approaching places where fuel, chemicals or explosives are
stored, please abide by laws, regulations and related signs.
3 To avoid damage to your microphone, you can only use accessories
such as a charger with 1A current for your microphone.
4 Do not slam, shake or throw violently to avoid malfunction and fire.
5 Do not place the microphone in a place with high temperature, high
humidity or a lot of dust, otherwise it may cause the microphone to
malfunction.
6 Do not disassemble or modify the microphone without authorization.
Otherwise, it may cause the battery to leak, overheat, burst and catch
fire.
7 Prevent the microphone from getting damp or other liquids from
entering the microphone, causing short-circuit, leakage and other
malfunctions of the microphone.
8 Do not throw the battery into the fire, otherwise it will cause the
battery to catch fire and burst.
9 Do not put metal objects such as necklaces into the microphone to
prevent short circuits.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition
without restriction.
4. SERVICE
If you have any problems with the microphone, please don’t
hesitate to contact us, we have 24-hour friendly customer
service for you
！
120 Days Unhappy Return
700 Days Warranty Extension
24 Hours 100% Happy Support
100% happy guaranteed for any issues.
warranty@litofelo.net
Table of contents
