Livart LPAC12CRWGR User manual

CONTENTS
1.SAFETY RULES.............................................................................
2.NAMES OF PARTS..........................................................................
3.ACCESSORIES................................................................................
4.OPERATION PANEL OF THE AIR CONDITIONER........................
5.OPERATING INSTRUCTION FOR THE AIR CONDITIONER ........
6.INSTALLATION...............................................................................
7.MAINTENANCE...............................................................................
8.TROUBLE SHOOTING....................................................................
1
2
3
3
5
8
10
11
The rating data indicated on the energy label is based
on the testing condition of installing the un-extended
air exhaust duct without adaptor A & B (The duct and
the adaptor A & B are listed in the accessories chart
of the Instruction Manual).
NOTE

SOCIABLE REMARK
The follow contents apply only the countries of Europe.
DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
It is prohibited to dispose of this appliance in domestic household waste.
For disposal, there are several possibilities:
A) The municipality has established collection systems, where electronic waste can
be disposed of at least free of charge to the user.
B) When buying a new product, the retailer will take back the old product at least
free of charge.
C) The manufacture will take back the old appliance for disposal at least free of
charge to the user.
D) As old products contain valuable resources, they can be sold to scrap metal
dealers.
Wild disposal of waste in forests and landscapes endangers your health when
hazardous substances leak into the ground-water and find their way into the food
chain.

SAFETY RULES
1. This air conditioner has no ventilator for taking in fresh air from out of doors. You must
open doors or windows frequently when you use gas or oil heating appliances in the
same room, which consume a lot of oxygen from the air. Otherwise, there is a risk of
suffocation in extreme cases.
2. Do not use in the following locations:
- Next to source of fire.
- An area where oil is likely to splash.
- An area exposed to direct sunlight.
- An area where water is likely to splash.
- Near a bath, a shower or a swimming pool
- In the green house
3. Never insert your fingers or any foreign objects into the air outlet. Take special care to
warn children of these dangers.
4. Always store the unit upright in order to maintain the compressor in a proper condition.
5. Be sure to unplug the unit before cleaning.
6. The heater must not be located immediately below a socket outlet.
7. If the appliance is covered, there is a risk of overheat.
8. Do not operate this unit if it had a damaged cord or plug or if it is not working properly,
or has been dropped or damaged in any manner. Take the unit to the nearestauthorized
service facility for examination, repair or electrical/mechanical adjustment.
1
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
CAUTION

2
NAMES OF PARTS
Operation Panel
Vertical Louver
Blade
Caster
Air Inlet (indoor)
Air Outlet
outdoor
Air inlet
outdoor
Fig.1
Carrying Handle
(both side)
Water Tank
Bottom Drain Plug
Power Cord
and Plug
Drain Plug
Power Cord
Band
(insert)
Fig.2
Horizontal Louver
Blade
Blades Control
Handle

ACCESSORIES
PARTS :
PARTS NAME :
Exhaust Duct
Adaptor A (for permanent duct mounting)
Adaptor B (for temporary duct mounting)
Expansion plug
QUANTITY :
1
1
1
4
Check all the accessories are included in the package and please refer to the installation
instructions for their usage.
1
1
1
Drain Hose(Connected with water tank)
OPERATION PANEL OF THE AIR CONDITIONER
Power Cord Band
(for bundling the power cord)
Digital Display
Signal receptor
(Not applicable to the
unit without remote control)
Timer on/off
indicator Lights
112233
44
5566
Mode
indicator
Lights
Water Full
indicator Light
Power
indicator
Light
77
Fan speed
indicator
Lights
Fig.3
Window Slider Kit
3
Drain Hose(Continuous drainage)
(Some models without)
1
TEMP. ADJUST
TIMER ON TIMER OFF
MODE
FAN SPEED
FULL
POWERPOWER
COOL DRY FAN HEAT
MEDHI LO
FC
88

4
11
22
33
Key Pad Functions Fig.3
MODE Button: Selects the appropriate operating mode:
Note:"Heat Mode" is for Heating/Cooling Models only.
MODE Indicator Lights(Green light): Illuminates under the different mode settings.
Water Full Indicator Light: Flashes red when the water level of the water tank exceeds
the maximum set level or if the water tank is not correctly positioned in the cabinet.
FAN SPEED Button: Selects High-Medium-Low fan speeds(HI--MED--LO)
Fan Options:
Cooling (3 speeds) HI--MED--LO.
Heating (3 speeds) HI--MED--LO.
Dry-Dehumidifying (1 speed) HI.
Fan (3 speeds) HI--MED--LO.
TEMP.ADJUST Button :
TIMER ON Button: Used to initiate the AUTO ON start time program, and used to
adjust Auto-Timer settings.
TIMER OFF Button: Used to initiate the AUTO OFF stop time program, and used to
adjust Auto-Timer settings.
oo
: Used to adjust (backward) temperature settings(1 C/2 F increments).
44
55
66
77
POWER Button: Power switch On/Off.
FAN Indicator Lights(Green light): Illuminates under the different mode settings:
Note: This appliance provides a feature that will allow you the option of setting temperatures in
Celsius or Fahrenheit . To change the temperature display on the main unit, press the
oo
key pad & key pad simultaneously to alternate between the C& Fscale.
o
.Celsius scale allows adjustments of 1 C increments.
o
Fahrenheit scale allows adjustment of 2 F increments.
Temperature Conversion Chart
OC 10 11 12 13 14 15 16 17 18 19 20 21
OF 48 50 52 54 56 58 60 62 64 66 68 70
22 23 24 25 26 27 28 29 30 31 32 33
72 74 76 78 80 82 84 86 88 90 92 94
88
Digital Display Window: Shows the setting temperature and Auto-On/Off time. While
on DRY and FAN mode, it shows the room temperature.
COOL Mode --DRY Mode--FAN Mode--HEAT Mode
oo
:Used to adjust (forward) temperature settings(1 C/2 F increments).

Fig.4a
5
OPERATING INSTRUCTING FOR THE AIR CONDITIONER
Before Starting This Unit
1) Select a suitable location, make sure you have easy access to an electrical outlet.
2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.4 &
Fig.4a
Fig.4
NOTE: Step 2 is required only while using the cooling mode .
3) Plug the unit into a 220-240V~50Hz/ or 115V~ 60Hz (Refer to the nameplate located on
the right side of the unit.) grounded electrical outlet. DO NOT USE A REGULAR EXTENSION
CORD. If it is necessary to use an extension cord with this unit, use an approved air conditioner
extension cord only.
4) Insert the power cord fixing strap into the hole in the back of the unit, and bundle up the excess
cord.
5) Make sure the Water tank is correctly positioned inside the cabinet otherwise the unit will not
operate.
6) Press the POWER button to turn on the unit.
Electrical Requirement
1. All wiring must comply with local and national electrical codes and be installed by a qualified
electrician. If you have any questions regarding the following instructions, contact a qualified
electrician.
2. Check available power supply and resolve any wiring problems BEFORE installation and
operation of this unit.
3. For your safety and protection, this unit is grounded through the power cord plug when
plugged into a matching wall outlet. If you are not sure whether the wall outlets in your
home are properly grounded, please consult a qualified electrician.
4. The manufacturers nameplate is located on the right side panel of the unit and contains
electrical and other technical data specific to this unit.
5. To avoid the possibility of personal injury, always disconnect the power supply to the unit
before installing and/or servicing.

OOOO
1 COOLING OPERATION (Operating temperature range: 17 C-32 C/62 F-92 F)
- Press the "MODE" button several times until the "COOL" indicator light comes on.
- Press the "TEMP ADJUST buttons " " or " " to select your desired room temperature.
OOOO
The temperature can be set within a range of 17 C-30 C/62 F-88 F.
- Press the "FAN SPEED" button to choose the fan speed.
OOOO
2 DEHUMIDIFYING OPERATION (Operating temperature range: 13 C-32 C/54 F-92 F)
- Press the "MODE" button several times until the "DRY" indicator light comes on.
- Under this mode, you cannot select a fan speed or adjust the temperature. The fan motor
operates at High speed.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not put the duct to window.
CAUTION: During Cooling and dehumidifying modes, if the compressor cycle is interrupted
(unplugged, power failure, etc.) and reinstated immediately thereafter, a compressor
protection circuit is automatically self-affected. The compressor cannot operate during
a compressor protection condition. It may take about 3 minutes before the protection
circuit self-deactivates.(This is normal)
3 HEATING OPERATION (Cooling only type without heat feature)
OOOO
(Operating temperature range:5 C-30 C/41 F-88 F)
- Press the "MODE" button several times until the "HEAT" indicator light comes on.
- Press the "TEMP ADJUST" buttons " " or " " to select your desired room temperature.
OOOO
The temperature can be set within a range of 17 C-30 C/62 F-88 F.
- Press the "FAN SPEED" button to choose the fan speed.
- Do not put the duct to window.
4 FAN OPERATION
- Press the "MODE" button several times until the "FAN " indicator light comes on.
- Press the "FAN SPEED" button to choose the fan speed. The temperature cannot be adjusted.
- Do not put the duct to window.
5 TIMER OPERATION
Setting the on timer:
- Press the "TIMER ON" button when the air conditioner is off.
- Continue pressing or keep pressing the "TIMER ON " button to select the time you need the unit
start to operate. The time is programmed as :0.5-1.0-1.5-2.0-2.5-3.0-3.5-4.0-4.5-5.0-5.5-6.0-6.5-
7.0-7.5-8.0-8.5-9.0-9.5-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-0.0
- The starting time is adjustable from 0.0 to 24.
Setting the off timer:
- Press the "TIMER OFF" button when the air conditioner is on.
- Continue pressing or keep pressing the "TIMER OFF " button to select the time you need the unit
stop operation. The time is programmed as :0.5-1.0-1.5-2.0-2.5-3.0-3.5-4.0-4.5-5.0-5.5-6.0-6.5-
7.0-7.5-8.0-8.5-9.0-9.5-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-0.0
- The turning off time is adjustable from 0.0 to 24.
Operating Instructions
6

6 WATER TANK DRAINAGE
- Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit .
- When the water level inside the internal tank reaches a predetermined level, the unit stop operation
automatically. The fan motor will continue to operate.
- Carefully remove the water tank from the cabinet and dispose of the water. Replace the water tank
back to its original position.
B) During Dehumidifying Mode:
- Remove the drain plug from the back of the unit and connect the drain hose, then connect the
other end of the drain hose to the water tank as depicted in Fig.5. So the condensed water will flow
into the internal tank through the drain hose.
- When the water tank is full, just pull it out and dispose of the water.
A) During Cooling Mode:
Remove the drain plug
from the back.
Remove the drain
plug and install the
drain hose.
Fig.5
7 CONTINUOUS DRAINAGE
- This unit also has provisions for a continuous drain option.
- During Cooling and dehumidifying modes, remove the drain plug from the back of the unit,
install the continuous drain hose(some models not included) , then attach a section garden
hose (not included) to the drain hose connector. Place the open end of the hose directly over
the drain area in your basement floor. Please refer to Fig.6 & 6a.
Connect the
drain hose
Fig.6
Remove the
drain plug
Fig.6a
7
Note: This drain method will reduce the cooling capacity, in order to maintain the best cooling effect,
you had better employ the water tank drainage.
10mmMax