
2
AFTER SALES SUPPORT
0800 422 274NZ
Tips before you start
1. Please check that all parts are present before you start the assembly of
your furniture.
2. For ease and speed of assembly, we recommend that before you
commence each step of the assembly, that you identify all the parts
required for that step.
3. For larger items, please ensure that you have sufficient space and people
(as indicated on page 1) to assemble your product safely.
4. We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
5. For the protection of your furniture, we recommend that the product is
placed on a protected surface during assembly to prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this
may damage the product. Do not use power tools.
r
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended household use only as it is a non-industrial product.
10. Please use caution and care when lifting the product to avoid personal
injury and/or product damage.
Ensure the umbrella is secured to the ground before use.
The umbrella base could be bolted to an even surface such as a deck
or a patio.
Assembled umbrella is intended to be used as sunshade and not as
rain and wind protection.
Do not leave the umbrella open in strong wind.
Always ensure that the umbrella is secured to a base on a level,
non-slippery surface.
We recommend to use 4 x 15kgs pavers on the base to ensure the
umbrella is stable (pavers are excluded).
Do not leave the umbrella unattended while it is open.
Be careful not to get your fingers caught when folding and unfolding.
Keep umbrella away from open flames or heat sources.
r
Assembly Details
Important Safety Instructions
Tips before you start
Assembly Details
Important Safety Instructions
Care and maintenance