Living Essentials ACPWH0214 User manual

Instruction Manual
SKU# ACPWH0214
Axel Air Cooler

For faster service:
Please contact Living Essentials
Regarding any defective product(s) / Part(s).
Our Customer Service Representative will assist you
through the process of obtaining replacement part(s) .
Visit our website and fill out the Parts & Service Form,
Give us a call, or email us for replacement parts at:
1-888-818-8789
r[email protected]
LIVING ESSENTIALS
1040 Walnut Ave.
Pomona, CA 91766
Attention: Customer Service Department
Limited Warranty
LIVING ESSENTIALS’ products are warranted to be free from defects in material and workmanship for a period of ONE YEAR:
One-year warranty from date of original purchase by consumer. If you believe your product is defective, please call, write, or e-mail our
customer service department.
Should your product be defective, LIVING ESSENTIALS will help in issuing replacement parts. Whether you call or write, please have your
model number and reference number located on the original packaging ready for our customer service team. You will be asked to tell us
what product you have, along with the date of purchase and the way you believe the product is defective. For any parts request, it must
include images of the defective part/s. Please do not ship your product back to us unless we specifically request you to do so. If it is
necessary for your product to be returned, all returns or exchanges must be made through the original store of purchase. Proof of purchase
must accompany the returned product. LIVING ESSENTIALS is not responsible for any store policies for returns or exchanges.
Note: This Warranty does NOT apply to any wear and tear. All replacement parts will be shipped standard ground service.
NO EXPEDITED Service available (for example; next day air, 2 day air service, 3 day air), there will NOT be any exceptions.
LIVING ESSENTIALS is not responsible for any consequential damages, which may arise out of the purchase, or use of any of our
product/s. LIVING ESSENTIALS is not responsible for any personal injury, or property/equipment damage from the use of such
product/s. LIVING ESSENTIALS’ liability for any breach of warranty shall be limited to replacement of the defective parts as
described above.
Important: Some states do not allow the exclusions or limitations
so the above limitations or exclusions may not apply to you.
Copyright by: LIVING ESSENTIALS and its affiliates

Instructions / Instrucciones / Moded' emploi
-1-
Axel Air Cooler
SKU#
ACPWH0214
CONTROL PANEL
BLADES
WATER LEVEL INDICATOR
POWER CORD
AIR FILTER
COOLING PAD
WATER TANK
CASTERS
Technical Specications
Rated Voltage
Rated Frequency
General Power
Water Tank Capacity
220-240V
50Hz
80W
10 L

-2-
Air Cooler Set-up
1. Be sure to place the air cooler horizontally on a at surface to install the casters.
2. Installation of wheels: place 4 wheels to the holes located at the base of the air
cooler. Insert the wheels tightly to the air cooler’s body. (Fig. 1)
3. To increase the cooling eect on your fan, be sure to ll your ice boxes with water and freeze them in
your freezer for a few hours or overnight until solid. Once your ice boxes are ready to use, place
them in your tank and ll with water until you reach the MAX level. Before turning on your cooler, lock
your tank in place with the levers by turning them to a vertical position.
4. Removing the water tank: Turn the water tank locks to horizontal position. (Fig. 2)
Take out the water tank and add clean tap water to the tank. *NOTE: Be sure to add the frozen ice
packs to the tank before adding water to avoid spilling. Place the ice packs as shown below to
prevent the water pump arm from malfunctioning; water pump arm should not touch the
ice packs.* (Fig. 3)
Ensure water level in the tank does not exceed the level “MAX” which can be
seen at the back portion of the tank. (Fig. 4)
MIN
MAX
Fig. 4
Fig. 2
Fig. 3
Fig. 1
Operating the Air Cooler
Insert plug to the electrical outlet. Press the “On-O” button to switch the unit “On”.
The LED indicator automatically shows the room temperature and shifts the fan to
stand by position. The function of the unit can be controlled via on board control
panel or by remote.

-3-
1. On/O：Pressing the “On”button on the control panel or pressing the On/O
button on the remote control will turn he unit ON at intermediate speed. After a few
minutes, the fan will drop to show speed or to the pre-programmed memory
setting. To switch back the standby position, simply press the “O” button on
control panel or press the “On/O” button on remote control.
2. Speed: Press this key to choose between high, medium and low fan speed.
Each time the “Speed” button is pressed, an icon will appear on the LED screen
indicating the current speed level.
3. Wind：Press the “Wind”button to choose the type. Indicator light will display the
selected type of wind;
Normal： A continuous wind blow that can be adjusted to low，med and high speed.
Natural： Nature setting provides a soft and comfortable environment with a selection
of low, medium and high speed.
Sleep：The sleep function operates at natural fan speed and slowly lowers the speed
before turning it o altogether. At high speed, the evaporative cooler functions for
30 minutes then shifts to medium speed to run for 30 minutes and low speed for
30 minutes before it turns o or until the end of preset time.
4. Timer：Press “Timer” button to set the fan between 1-12 hours, the indicator
light will show the selected time and will operate until the preset time passes.
Continuously press the button to your desired running time.
To cancel the timer, simply press the button until the indicator shows“00”.
5. Swing: Press “Swing” button to change the wind direction. The swing icon will
appear on the screen when the function is activated. Press the button again to stop
the oscillation. The vertical direction of air ow can be adjusted manually by directing
the outlet louvers up and down.
6. Cool：Press this key to activate the air cooler function. The water pump will take the
water from the tank and pour it onto the cooling pad. Cooling pad absorbs the water and
evaporated air is blown out through the fan. The cool breeze by the cooler drops the
temperature and creates a relaxing cooling eect.
Caution：If the water level is low or there is no water in the tank, do not activate the
“Cooler ” function. Check the water level and add clean water if needed, also to
replace the stale water. It is recommended to replace water in the tank at least
once a week.
7. Remote：Remote control operates with one CR2025 3V Lithium Cell Battery.
Direct the remote control to the control panel of the evaporative air cooler. If remote
control is not working, rst check the battery is placed correctly.
If you are not going to use it for a long time, take out the battery to prevent damages
that may occur due to battery leakage.

-4-
Operating the Water Tank
Check the level of water in the tank frequently. Be sure the water level is not below the
“MIN” marking which is located on the water tank. Activating the “Cool” function with
insucient amount of water may cause malfunction of the water pump and warranty of
your product will be void.
Before relling water, turn your unit to “O” position by pressing the ON/OFF button on
the panel and unplug the power cord.
Using the Ice Boxes
In order to increase the cooling eect of your fan, you can use ice boxes which are
included with the unit. Before using, place them in your freezer for a few hours or
overnight until solid. Then place them into the tank and add water until you reach the
“MAX” level. Utilizing ice boxes drops the temperature of the air ow which will create a
more eective cooling eect.
Safety Precautions
1. Make sure this appliance and the power cord is not damaged before operating. In
case of damage, please consult your authorized technical service.
2. Unplug the power cord plug before taking out the water tank.
3. Do not insert any objects to the ventilation or exhaust opening for this may
damage the product and could cause and electrical shock or re.
4. Do not operate your unit with a cover on it as this may result to overheat and motor
damage.
5. The plug must be removed from the electrical outlet when not in use and before
moving, installing, uninstalling and cleaning.
6. Do not add any chemical or metal ingredients into the water tank. These materials
are dangerous and may cause problems.
7. Be careful not to expose infant and elderly directly to the air cooler for a long time.
8. This appliance should be used under the rated voltage and frequency as indicated
in the rating label.
9. This appliance is not intended for use of persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance.
10. Do not use your air cooler in or around water; may cause electric shock and risk of
re.
11. Do not pull while the power is on. Always ensure that the plug is fully inserted into
the electrical outlet before operating.
12. Do not attempt to disassemble, repair or modify this appliance for the warranty will
be void if repair is carried out by unauthorized person/services.
13. Do not leave your unit under direct sunlight for a long time.
14. Before using the evaporative air cooler, always ensure that it contains water. Clean
the tank with fresh tap water every two weeks.

-5-
Cleaning and Maintenance
Dust may accumulate in the dust lter or cooling pad after some time and may aect the
cooler’s function. Therefore it is recommended to clean your evaporative cooler regularly.
Below are written steps on how to clean this unit:
Turn o the air cooler and unplug the power cord before beginning to clean.
1. Dust Filter
To remove the dust lter, use a screwdriver (not included) to remove the screw and push
the two tabs down to pull it out. Use mild cleaning agent and soft brush in removing the
dust and dirt on the lter. When done, rst attach the bottom part of lter then push the
upper part to secure it and reinstall the screw.
2. Cooling Pad
After removing the dust lter you can see the cooling pad. Remove from the upper middle
area and gently pull out the pad. Use a clean cloth or soft brush to remove dust and dirt
from the pad. Rinse with clean water if needed and leave to air dry. Never use any harmful
chemical solution for may cause damage to the pad.
Your cooler takes water from the tank and pumps it onto the cooling pad. The water
owing through the cooling pad goes down back into the tank. The cycle results to
absorption of dust and dirt in the air which makes the air safer and fresher to breathe.
Troubleshooting Guide
Problem Possible Cause Solution
1. Fan does not work.
2. The temperature of air
being expelled by the cooler
is not cold enough.
1. Power cord is not plugged in or
not properly plugged in.
2. The“On” button on the control
panel is not activated.
1.Dust accumulates on the dust
lter and cooling pad
2. Water level in the tank is below
“MIN” level.
1. Follow the steps in cleaning
the dust lter and cooling pad.
2. Turn o the unit, rell the tank
with clean tap water, turn the
power position and cool to on.
1. Plug the power cord properly
2. Press the “On” button on the
control panel.

-6-
Operating the Water Tank
Check the level of water in the tank frequently. Be sure the water level is not below the
“MIN” marking which is located on the water tank. Activating the “Cool” function with
insucient amount of water may cause malfunction of the water pump and warranty of
your product will be void.
Before relling water, turn your unit to “O” position by pressing the ON/OFF button on
the panel and unplug the power cord.
Using the Ice Boxes
In order to increase the cooling eect of your fan, you can use ice boxes which are
included with the unit. Before using, place them in your freezer for a few hours or
overnight until solid. Then place them into the tank and add water until you reach the
“MAX” level. Utilizing ice boxes drops the temperature of the air ow which will create a
more eective cooling eect.
Safety Precautions
1. Make sure this appliance and the power cord is not damaged before operating. In
case of damage, please consult your authorized technical service.
2. Unplug the power cord plug before taking out the water tank.
3. Do not insert any objects to the ventilation or exhaust opening for this may
damage the product and could cause and electrical shock or re.
4. Do not operate your unit with a cover on it as this may result to overheat and motor
damage.
5. The plug must be removed from the electrical outlet when not in use and before
moving, installing, uninstalling and cleaning.
6. Do not add any chemical or metal ingredients into the water tank. These materials
are dangerous and may cause problems.
7. Be careful not to expose infant and elderly directly to the air cooler for a long time.
8. This appliance should be used under the rated voltage and frequency as indicated
in the rating label.
9. This appliance is not intended for use of persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance.
10. Do not use your air cooler in or around water; may cause electric shock and risk of
re.
11. Do not pull while the power is on. Always ensure that the plug is fully inserted into
the electrical outlet before operating.
12. Do not attempt to disassemble, repair or modify this appliance for the warranty will
be void if repair is carried out by unauthorized person/services.
13. Do not leave your unit under direct sunlight for a long time.
14. Before using the evaporative air cooler, always ensure that it contains water. Clean
the tank with fresh tap water every two weeks.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority dierentiated waste collection center or to a
dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for
the environment and health, deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain signicant savings in energy and
resources. As a reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.