LST LST-200 User manual

LST-200 Installation Guide
The LST-200 is a full-featured, GPS product designed for asset protection.
Battery backup provides protection against potential tampering, and the mo-
tion detector provides notification when the asset is moved.
INSTALLATION LOCATION:
The LST-200 must be installed in a horizontal position, label-side up.
LoneStar Tracking recommends placing the device out of sight to prevent tampering.
Optimal Location Suggestions:
Engine Compartment - close to the battery
Under the Dashboard or Steering Wheel
Behind the Radio - close to power connect
INSTALL:
There are 6 wires out of the LST-200.
The RED wire is for power and connects to the POSITIVE side of your battery.
The BLACK wire is your ground and should be connected to the NEGATIVE side of the battery.
** After device is connected, sign in to https://colt.calamp-ts.com
Connect to GREEN wire on Disable Relay
NA
Connect to CONSTANT 12VDC
Connect to Asset GROUND
NA
NA
CalAmp
ESN: IIIIIIIIIIIIIIIIIIIII
P/N: LMU*** CC: ****
MSN_D: IIIIIIIIIIIIII
OR “MobileInstall” app is available as a free download from Google Play Store
Disable
Relay
Connect to GREEN wire from LST harness
Connect to IGNITION SWITCH side of Starter Wire
Connect to STARTER SOLENOID of Starter Wire
The GREEN wire connects to the Disable Relay.
LST-200

Login Site: https://colt.calamp-ts.com
• Login to system using USERNAME and PASSWORD provided with
your device.
• Go to MY ACCOUNT at the top blue bar.
• On the left grey area go to INSTALLATION PORTAL.
• On the right, you will see INSTALL DEVICE, click the green button
labeled INSTALLATIONS.
• Click BROWSE DEVICES, click on your device, click the green button
SELECT DEVICE
• Click NEXT, this will activate and test the device to ensure correct
installation.
ACTIVATION & TESTING
There are 2 options for activating and testing devices:
Google Play Store’s “MobileInstall” App:
OR