Luneau Technology Briot Evolution User manual

Instructions for cleaning and sterilization
Briot Blocker / Blocker-Tracer Combo
Evolution / Evolution GT / Attitude / Attitude GTS
This instruction guide aims to clean and sterilize your
Evolution / Evolution GT / Attitude / Attitude GTS
for common use . For other instructions, please refer to the USER MANUAL of each model.
For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these
instructions. Cleaning conducted by a process other than the one described in this instruction may cause
deterioration or damage to the equipment.
Briot Edger (Alta Evolution / Evolution HC / Attitude I / Attitude II)
df
Briot Blocker (Evolution / Evolution GT / Attitude / Attitude GTS)
The screen must be wiped gently without
applying excessive force.
1- Cleaning of the touchscreen
Clean the screen after every use with Cidalkan wipes or other alternative.

2- Cleaning the ON/OFF switch
The ON/OFF Button at the front side and/on the Attitude,
located on the front and back side should be cleaned with
Cidalkan wipes everytime after switching off the machine.
Recommendation is to clean it after you take off your
gloves.
3- Cleaning of layout plate and lens holder
Clean the layout plate and lens holder after every use with
Cidalkan wipes or other alternative.
4- Cleaning of lens blocker arm
Clean the lens blocker arm after every use with Cidalkan
wipes or other alternative.
5- Cleaning of tracer drawer
Clean the tracer drawer after every use with Cidalkan wipes
or other alternative.
Only use the below recommended
solutions. Other solutions may damage or
discolour the device.
LUNEAU TECHNOLOGY OPERATIONS
2 Rue Roger Bonnet-27340 PONT DE L’ARCHE - FRANCE - Tel. + 33 232 989 132 • [email protected] • www. luneautech.com
Wipes - Instructions for use please read carefully !
01 02 03
Take a wipe out of its packaging and close Clean thoroughly by hand wiping. Throw away the wipe.
the packaging tightly after use. Leave the product on for 5 minutes. Change wipe for each medical
Do not rinse. surface or device.
7- Cleaning of the external
body of the device
Please proceed to clean regularly the exterior of
the device. Most important the region around the
touchscreen, the region around lens holder and blocker
arm.
Before cleaning the unit, turn it off and unplug it from
the electric outlet.
To clean the plastic surface of the device gently wipe
the top, bottom, and front surfaces.
CMJN (print) : 80 / 0 / 7 / 0
RVB : 0 / 178 / 227
Pantone : 306 C
HEX : #00b2e3
CMJN (print) : 67 / 9 / 100 / 0
RVB : 97 / 167 / 48
Pantone : 369 C
HEX : #61a730
REF. 369113 Cidalkan wipes incl. alcohol.
disinfectant
Standards CE 0459
This document is not contractual - FC001165 - ind 00- April 2020
6- Cleaning of the toolsbox
Proceed to a regular cleaning of the exterior of the
toolsbox and particularly handles.
Every mechanical parts must be wiped
gently without applying excessive force.