LuxCraft Double Lawn Glider User manual

1 - (A) Roof Assembly
1 - (B) Left Leg Assembly
1 - (C) Right Leg Assembly
2 - (D) Seat & Back Assembly
4 - (E) Seat Support Brace
4 - (F) Hanger Arms
1 - (G) Platform
4 - (H) Armrest's
Hardware
8 - 3 1/2" Bolts
8 - 3 1/4" Bolts
4 - 3" Bolts
20 - Washers
20 - Nuts
20 - 2-1/2" Screws
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
Double Lawn Glider Assembly Instructions
Page#
of 5
1

1. Place Roof Horizontally on its side then place both
Leg Frames on Horizonal Edge. Make sure that
Brace on Leg Frame is on inside of Roof Before
inserting Bolts. Attach Leg Frames to inside Roof
using 8 - 3 1/2" Bolts. Use Washer between
Nut & Product. Be sure to match all numbers
& or letters. When all 8 Bolts are tightened
Place Frame Upright.
2. Attach Corner Brace to inside Roof
using 4 - 3" Bolts. Use Washer between Nut & Product
Be sure to match all Numbers & or Letters
Page#
of 5
2

3. Attach Hanger Arms to Seat Assembly Using
1 - 3 1/4" Bolt Per Hanger Arm, Use Washer
between Nut & Product, Be sure to match all
Numbers & or Letters.
4. Attach Brace to Hanger Arm
using 1 - 3 1/4" Bolt Per Hanger Arm.
Use Washer Between Nut &
Product, Be sure to match all
Numbers & or Letters.
Page#
of 5
3

6. Attach Armrest to Back & Hanger Arm Using 4 - 2 1/2" Screws
per Armrest, Be Sure to match all Numbers & or Letters.
Bolt
Nut
Bearing
Bearing
Nut
Washer
Hanger Arm
Platform
7. Attach Platform to Hanger Arms Using Hardware already Attached
to Platform. See Diagram Below for Hardware. Be Sure to match all
Numbers & or Letters.
5. Attach Seat Support Brace Using 1 -
2 1/2" Screw per Brace.
Be Sure to match all Numbers & or Letters.
Page#
of 5
4

8. Attach Hanger Arms to Hanger on inside of Roof.
Page#
of 5
5