Luxeon D620EF-CAM User manual

D620EF-CAM Wireless Camera Set
User’s Guide
Page 1
D620EF-CAM
Wireless Camera Set for the D620EF projector
User’s Guide

D620EF-CAM Wireless Camera Set
User’s Guide
Page 2
Table of Contents
GettingStarted 3
FCCNotice 3
Product Features 4
Applications 4
Identify the Controls 5-6
Using the Wireless Camera 6
Setting up the wireless camera 6
Powering On the wireless camera 7
Powering Off the wireless camera 7
Switching frequency channels 7
Recharging the batteries 7
Adjusting the Captured Image 8
Adjusting the Wireless Camera height 8
Adjusting the Camera Focus 8
Care and Maintenance 9
Protecting the wireless camera 9
Cleaning the lens 9
FAQ & Troubleshooting 10-12
Specifications 13
WirelessCamera 13
WirelessReceiver 13

D620EF-CAM Wireless Camera Set
User’s Guide
Page 3
Getting Started
Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential installation. This equipment generates, use, and can
radiate radio frequency energy and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Notice: Any unauthorized change or modification that is not expressly approved by the partly
responsible for compliance could void the user's authority to operate the equipment.

D620EF-CAM Wireless Camera Set
User’s Guide
Page 4
Product Features
Get ready for high-quality “wireless” projection of real-object images. The D620EF-CAM
wireless camera set can transmit real-time images from any corners of the home, the
classroom, the meeting room, and the office to the D620EF projector. With the D620EF
projector & the D620EF-CAM as an integrated solution, you will have a revolutionary
projection system to project live images of any objects onto the projected screen with
hassle-free setup. The D620EF-CAM wireless camera set offers the latest in real-time image
capture & transfer technology, including:
 A complete replacement for your document camera when operated with the
D620EF projector
 High-quality image via Sony’s high-performance HAD CCD technology
 Reliable 2.4GHz RF wireless technology for consistent transmission within 30
meters
 16.7 million displayable colors
 Can be equipped with rechargeable batteries for easy movements
 4 wireless channels available for switching to avoid signal interferences
 Can capture images of documents, people, and any other objects
 High performance focus lens
 Compact size
Applications
 Replacement for the common document cameras
 Replacement for expensive digital projectors with document cameras
 Deliver versatile presentations in which you can capture real-time images of any
real-object from anywhere including data on your computer screen
 Make possible the real-time projection of facial images of the presenters and other
participants in a meeting
 Easily share the projector between presenters without the fuss of plugging &
unplugging the data cable
 Can broadcast outdoor activities to the projector indoors

D620EF-CAM Wireless Camera Set
User’s Guide
Page 5
Identify the Product Controls
The Wireless Camera
Symbol Control Function
1 Power on/off Button This button powers on and off the wireless camera
2 Channel Switch This switch enables you to switch to different frequency
channels.
3 Extendable slider Extends the wireless camera to a height that allows it to view
documents in an upright position.
4 Focus adjustment This adjustment ring controls the focus on the image.
5. DC power inlet The adapter plugs in here to charge the batteries and provide
power to the camera.
6 Elevation platform
7 Battery Compartment

D620EF-CAM Wireless Camera Set
User’s Guide
Page 6
The Wireless Receiver (mounted to the D620EF projector)
Symbol Control Function
1 Channel select button This select button enables you to switch to different frequency
channels.
2 Channel LEDs When selecting a certain channel, its corresponding LED will
light on.
Using the Wireless Camera set
Setting up the Wireless Camera set
Connect the Receiver module to the Projector
1. Attach the Receiver module to the two joints protruding from the D620PW projector.
2. Connect one end of the DC power cable to the D620PW projector’s “Screen
Control” port. Connect the other end of the DC power cable to the Receiver’s “DC”
port.
3. Connect one end of the RCA video cable to the D620PW projector’s “Video” port.
Connect the other end of the RCA video cable to the Receiver’s “Video” port.
Load the batteries into the Wireless Camera
1. Open the hatch at the lower part of the wireless camera to reveal the battery
storage area.
2. Load 8 rechargeable Ni-MH AA batteries into the battery storage area.
3. Close the hatch.
*DO NOT USE BATTERIES OTHER THAN AA RECHARGEABLE NI-MH (NICKEL
METAL HYDRIDE) BATTERIES.

D620EF-CAM Wireless Camera Set
User’s Guide
Page 7
Powering On the Wireless Camera set
1. Make sure the 8 batteries are loaded correctly into the wireless camera. If you
have no batteries loaded, then please make sure the AC adapter is connected to
the DC port of the wireless camera, and the adapter is plugged to an AC power
outlet.
2. Press the power on/off button on the top left side of the wireless camera. If the
LED light is on, then the power is on.
*If the camera does not power on after you have completed the above 2 steps,
please check the “FAQ & Troubleshooting” section of the manual.
Powering Off the Wireless Camera set
1. Press on the power on/off button on the top left side of the wireless camera. If the
LED light is off, then the power is off.
*If the camera does not power off after you have completed the above step, please
check the “FAQ & Troubleshooting” section of the manual.
Switching frequency channels
1. Switch to the desired channel by using the channel switch on the wireless camera.
2. Switch to the desired channel by using the channel switch button on the Receiver.
*Make sure the channel set on the wireless camera and the receiver match. For
example, channel 1 on the wireless camera, and channel 1 on the receiver.
Recharging the batteries
1. Please make sure that the batteries in the wireless camera are “rechargeable”
(common rechargeable batteries are Ni-MH, Li-Ion).
2. Please plug in the adapter to a power outlet, and connect the adapter to the
wireless camera.
3. Recharge for 2 hours, and then disconnect the adapter from the wireless camera.

D620EF-CAM Wireless Camera Set
User’s Guide
Page 8
Adjusting the Captured Image
There are two ways to adjust the image being filmed by the wireless camera.
 Adjusting the wireless camera height
 Adjusting the camera focus
Adjusting the Wireless Camera height
The wireless camera has a built-in extendable slider, which can increase its height. This
height extension enables the camera to view documents at an optimal top-down view angle.
To adjust the height:
1. To increase height, hold the upper part of the camera, and lift upwards.
2. To return to the normal height, hold the upper part of the camera, and push
downwards.
Adjusting the Camera Focus
The camera has a focus feature that allows you to focus onto the objects that is being
filmed with the camera. To adjust the focus:
1. Turn the focus ring to the left or right until the projected image is clear.

D620EF-CAM Wireless Camera Set
User’s Guide
Page 9
Care and Maintenance
Protecting the camera
To protect your wireless camera from various types of the damages, please follow the
suggestions below:
 Do not drop the wireless camera or the receiver
 Do not expose the wireless camera to rain and moisture
 Do not allow the wireless camera or the receiver to be exposed to extremely high
temperatures
 Do not open the wireless camera or the receiver. If the product is not operating
properly or damaged, please contact your Luxeon reseller, dealer, service provider
or Luxeon’s technical support team
Cleaning the lens
To clean the lens without damaging it, please follow this procedure.
1. Wipe the lens in the same single direction each time.
2. Do not wipe back and forth on the lens.
*CAUTION: Do not use a dirty cloth to wipe the lens.

D620EF-CAM Wireless Camera Set
User’s Guide
Page 10
FAQ & Troubleshooting
Frequently Asked Questions (FAQ)
1. Why do I see some fading images on the projected screen when using the wireless
camera?
Answer: Fading image is normal if people move around or between wireless camera and
projector.
2. Is there any interference when using the wireless camera in a RC (reinforced concrete)
building and in a SRC (steel reinforced concrete) building?
Answer: Basically, steel materials would absorb the RF (radio frequency) wave; as a result,
the transmission range will be shorter. Therefore, users have to try to shorten the
transmission distance between two units in a SRC (steel reinforced concrete) structure.
However, in a RC (reinforced concrete) building, the transmission situation would be better.
3. How do I select channel to avoid interference?
Answer: You just need to choose an exact corresponding channel for the wireless camera
and the receiver. If the channel you have selected is affected by interferences, then just
change to other channels (the wireless camera & receiver must be on the same channel).
There are 4 channels to choose from, and which are sufficient to avoid signal interferences.
4. What is the size of the batteries used in the wireless camera?
Answer: The required battery size is AA-type batteries.
5. What rechargeable batteries can be used to power the wireless camera?
Answer: The recommended type of batteries to be used to power the wireless camera is
Ni-MH (Nickel Metal Hydride).
6. What non-rechargeable batteries can be used to power the wireless camera?
Answer: Luxeon prohibits the use of any non-rechargeable batteries for the wireless camera.
The warranty does not cover damages incurred by using any non-rechargeable batteries.
7. My batteries are fully charged, but why is the power exhausted in less than 1 hour?
Answer: If the battery power is getting exhausted faster than the usual rate, it could be due
to the following reasons.
 The rechargeable batteries could be near the end of their life cycle. Use a new set
of batteries.
 One or several of the batteries could be defective, and this drains the power from