READ ME FIRST
Fold Fold Fold
QUICK INSTALL GUIDE
Dual-Band Wireless 600N Router
XWR-600
Includes:
One: XWR-600 Dual-Band Wireless 600N Router
Two: Attached Dual Band Antennas
One: Ethernet Cable
One: Power Adaptor
ROUTER SETUP AND CONFIGURATION
1Physical Installation
The XWR-600 Wireless Router is designed for simple and efficient installation
on a desk or other horizontal surface. Be sure to place the XWR-600 where
there is adequate room around the device for ventilation.
2Connecting Ethernet and Power
WAN Connection: Connect the Ethernet cable from the modem/router
equipment provided by your Internet Service Provider (ISP) to the black
WAN port of the XWR-600.
AC Power: Connect the included AC Adapter to the XWR-600 first and then
to the AC outlet.
3Preparing for Access
IP Addressing
The XWR-600 default LAN IP address is 192.168.0.1. The DHCP server on the
XWR-600 is configured by default to create a 192.168.0.x network.
Both the default LAN IP address and subnet scheme can be changed. However
for hassle-free plug-and-play installation of other Luxul hardware, we recom-
mend you use the default IP address if possible.
If your client device is set to obtain an address automatically, no further
configuration is required and you can skip to the next step, Access and Setup.
If your computer or device isn’t set to obtain an IP address automatically,
you’ll need to set a temporary static IP address on that device. Set the IP
address of your computer to an address in the 192.168.0.X range, then set
the Gateway/Router address to 192.168.0.1 (the default IP address of the
XWR-600).
nNote: Visit http://luxul.com/ip-addressing to learn more about
changing your computer’s IP address and getting connected.
4Access and Setup
Getting Connected
Connecting Via an Ethernet Device: Use an Ethernet cable to connect
your computer to one of the green XWR-600 LAN ports. Ethernet is the
preferred method of connection.
Connecting Via a Wireless Device: Connect a wireless client device
to one of the XWR-600 default wireless networks (Luxul600 or
Luxul6005G). Both Wireless networks will run in Open Security mode, so
a passphrase will not be required until Wireless Security is configured.
Open a web browser, enter 192.168.0.1, then log in to the router using the
default user name and password and proceed with configuration:
Default IP: 192.168.0.1
Username: admin
Password: admin
nNOTE: If another device on your network shares the 192.168.0.1
address, you’ll need to reassign that device a different IP
address to configure the XWR-600.
nNOTE: Only devices that support the 5GHz frequency will see the
default Luxul6005G wireless network.
LEGAL AND REGULATORY INFORMATION
© 2016 Luxul. All Rights Reserved.
No part of this publication, or any other publication may be modified or adapt-
ed in any way, for any purposes without permission in writing from Luxul. The
material in this manual is subject to change without notice. Luxul reserves the
right to make changes to any product to improve reliability, function, or design.
No license is granted, either expressly or by implication or otherwise under any
Luxul intellectual property rights. An implied license only exists for equipment,
circuits and subsystems contained in this or any Luxul product.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful inter-
ference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC ID: W59XWR-600
IC: 8584A-XWR-600
FCC Statement—Wireless FCC 2.4GHz & 5GHz 802.11abgn
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020,
declares that this Luxul XWR-600 is in compliance with the essential
requirements and other relevant provisions of Directive 1995/5/EC.
For a copy of this report send a self addressed stamped envelope
to: Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Industry Canada (RSS-Gen Issue 4)
CAN ICES-3(B)/NMB-3(B)
Sales
P: 801-822-5450
Technical Support
P: 801-822-5450 Option 3
© 2016 Luxul. All Rights Reserved. LUX-QIG-XWR-600 0161609
