MAINSPRING OXFORD GUARDIAN User manual

Vol.1.11 EN
INSTRUCTION
MANUAL
OXFORD GUARDIAN
6 SLOT WATCH WINDER

OXFORD GUARDIAN
6 SLOT WATCH WINDER
For more details on operating this watch winder
please refer to the enclosed booklet or visit
im.mainspring.store
The watch winder is a device designed to help keep automatic
watches wound and running
when not being worn.
Through careful, programmed rotations the winder moves the
watch, which helps keeps the watch parts, gears lubricated
extending the life of the watch.
Your watches are wound and stored securely,
ready to use, wound to be worn at any time.
1

2
SLOT 1 & 2
SLOT 3 & 4
SLOT 5 & 6
PILLOW
USEU
UK AU
WHAT’S INSIDE
1. Six slot watch winder 3. AC/DC Adapter
2. 6 x Pillow 4. 4 x Regional plug attachments

PROGRAM
KNOB
SWITCH #1
SELF-STOP
SWITCH
POWER
SWITCH
POWER SOCKET
DC 3V
OR 5V / IN LIGHT
SWITCH
BATTERY
COVER
Use D Size Battery
2 Pieces
(Battery not included)
PROGRAM
KNOB
SWITCH #3
PROGRAM
KNOB
SWITCH #2
SELF-STOP
SWITCH
POWER
SWITCH
POWER SOCKET
DC 3V OR 5V / IN
LIGHT
SWITCH
OFF
OFF
OFF
3

AC/DC
ADAPTER
UK
POWER
SOCKET
OPERATION INSTRUCTIONS
If your automatic watch has already stopped running please manually wind
the watch to ensure it is running first before storage in the winder.
1. Load your watch on the pillow, then fix it on the rotator.
3. Select a suitable programs mode by Program Knob Switch, 5 modes are
available.
2. Plug in the adapter and turn on the power.
4
PILLOW
POWER
SOCKET
DC 3V
OR 5V / IN
POWER
CABLE
OFFMODE 1
MODE 2
MODE 3 MODE 4
MODE 5

PRODUCT WITH 5 PROGRAM
MODES
Your winder is equipped with different modes of operation. Each one id.
5 PROGRAM MODES
While all modes should work for your
watch, your winder is equipped with
multiple wind settings that enable a
more finely tuned experience better
suited to your timepieces.
Mode 1: Winder is off.
Mode 2: Winder rotates clockwise for 2 minutes, rests for 6 minutes, then
repeats the cycle.
Mode 3: Winder rotates counter-clockwise for 2 minutes, rests for 6
minutes, then repeats the cycle.
Mode 4: Winder rotates clockwise for 2 minutes, rests for 6 minuter, then
rotates counter-clockwise for 2 minutes, rests for 6 minuter, then
repeats the cycle.
Mode 5: Winder rotates clockwise for 5 minutes, counter-clockwise for 5
minutes, repeals this cycle for 3 hours, then rests for 9 hours
before repeating the entire cycle from the beginning.
SELF-STOP SWITCH
I: When the door is open the motors will
stop working and trays will stop
moving. When the door is closes all the
motors work and the trays will start
revolving.
O: The product is off. Even if the door is
closed, it will not run.
SELF-STOP
SWITCH
POWER
SWITCH
POWER SOCKET
DC 3V OR 5V / IN
LIGHT
SWITCH
OFFMODE 1
MODE 2
MODE 3 MODE 4
MODE 5
5

TROUBLE SHOOTING
Please note that the winder is designed to rotate and maintain the amount of
power reserve in the watch. If your watch is already on a low amount of
power reserve or is not running when you place it in the winder, it may not
work.
Please check that the door of the winder is closed. The winder motors will
stop running when the door is open when the “SELF STOP SWITCH” is
operated.
There are some factors which generally affect the effectiveness of the
winder :
1. Check the watch placement in the winder. Your watch should be placed
in the winder with the dial facing you. When looking at your watch in
the winder, it should be as if you are making a reading of it from your
wrist.
2. Some watches must be fully wound before being placed into the winder
as the power reserve when removed from your wrist may not be enough
to keep the watch wound. Please refer to your instruction manual on how
to manually wind your watch.
3. Manually wind your watch prior to placing it into the winder.
You can prop the back of the winder using a book or magazine to
increase the angel of the turntable and test the winder again. The closer
the watch dial is to being vertical the better the chance of the test being
accurate.
CAUTION:
1. Please use the adapter included with your watch winder or similar
adapters with the exact same voltage output.
2. Please do not manually spin the winder. This will damage your watch
winder and void your warranty.
3. Avoid exposing the watch winder to direct sun, water and extreme
temperatures which may damage the watch winder.
6

CARE AND MAINTENANCE
1. Please do not place your watch winder in direct sunlight or other heat
sources such as radiators, electric heaters or stoves.
2. Your watch winder should be kept away from water and liquids.
3. Avoid placing your winder next to areas of excessive sand, dust or other
objects that may vibrate, as this may also impact the functioning of your
winder.
4. Please store your watch winder at room temperature.
5. When the watch winder is on, make sure there is nothing stopping or
blocking it from turning.
6. Unplug your watch winder if not being used for a prolonged period of
time.
7. Watch winders are not toys. We recommend that you store your winder
carefully out of reach of children.
8. Your watch winder does not require any special maintenance. We
recommend cleaning it regularly with a soft, damp cloth, then wiping it
dry.
RECYCLING
Your watch winder, together with new or used batteries, must not be
disposed of as household waste. These elements must be taken to a waste
collection point that recycles electrical devices and batteries.
By ensuring these products are disposed of properly you can help prevent
potentially harmful effects, both to the environment and human health.
Recycling helps conserve natural resources. For further information on
recycling this product please contact your local authority, waste collection
site, or place of purchase.
DARTMOUTH BRANDS LTD
C/O THE WOW COMPANY
HIKENIELD HOUSE, EAST ANTON COURT,
ICKNIELD WAY, EAST ANTON,
ANDOVER SP10 5RG,
UNITED KINGDOM.